Subject Matter Expert (SME) & Lead Developer

Radiancetech

Huntsville (AL)

On-site

USD 150,000 - 210,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Radiance Technologies in Huntsville, AL seeks a Subject Matter Expert and Principal Lead Developer to drive hands-on design, prototyping, and integration of core missile subsystems, including GNC, CAS, and embedded software. You will lead cross-domain teams and translate requirements into production flight code.

Your role includes developing HWIL testbeds, conducting VV&A, and ensuring airworthiness under the direction of the Chief Engineer. This is a high-impact, hands-on leadership position.

Qualifications

  • 25+ years hands-on experience in aerospace or related engineering.
  • Lead technical developer on guided weapon/missile programs.
  • Experience with GNC, CAS, and flight software.
  • Active DoD Secret clearance.
  • Proficiency in C/C++, Python, MATLAB/Simulink.
  • Experience with RTOS and embedded buses.

Responsibilities

  • Lead hands-on development across mechanical, embedded software, and GNC.
  • Design, prototype, and integrate missile subsystems.
  • Develop HWIL/PIL testbeds and VV&A procedures.
  • Translate requirements into flight code and actuators.
  • Support pre-flight testing and root-cause analysis.

Skills

C/C++
Python
MATLAB/Simulink
RTOS development
GNC algorithms
Kalman filters
Embedded software
Flight code generation

Education

B.S. in Aerospace/Engineering/CS
M.S. in related field
Ph.D. in related field

Tools

VxWorks
Linux PREEMPT_RT
Green Hills INTEGRITY
MIL-STD-1553
ARINC 429
Ethernet/UDP
PCIe
CAN

Job description

Radiance Technologies, a rapidly growing employee-owned company, is seeking an exceptionally skilled Subject Matter Expert (SME) & Principal Lead Developer to drive the hands-on design, development, prototyping, and integration of core missile subsystems. In this role, you will be the lead hands-on technical practitioner across mechanical hardware, real-time embedded software, computer engineering architectures, Guidance, Navigation, and Control (GNC) algorithms, and Control Actuation Systems (CAS). Working under the direction of the Program Chief Engineer (who holds final airworthiness and system sign-off authority), you will serve as the primary hands-on technical architect and lead developer—translating top-level program requirements into production-ready flight code, integrated actuator mechanisms, low-latency bus architectures, and high-fidelity HWIL testbeds.

Key Responsibilities
1. Multidisciplinary Lead Development & Prototyping

Act as the lead hands-on developer across mechanical structures, embedded software, onboard computer architectures, GNC algorithms, and CAS actuation subsystems. Formulate, model, and execute multi-domain trade studies—balancing mechanical mass/inertia constraints, aerothermal loading, computational throughput, and control loop latency for presentation to the Chief Engineer. Draft system and subsystem technical specifications, Interface Control Documents (ICDs), and qualification plans for review and approval by the Chief Engineer.

2. Control Actuation Systems (CAS) & Mechanical Implementation

Lead the hands-on engineering, dynamic modeling, and laboratory integration of high-speed Control Actuation Systems (electromechanical, hydraulic, or cold-gas thrusters). Analyze fin/nozzle dynamic response, thermal limits, high-torque gearbox compliance, and motor drive performance under extreme G-force and aerodynamic load environments. Troubleshoot complex physical-electric-hydraulic failure modes, structural resonances, non-linearities (backlash, hysteresis), and mechanical compliance issues.

3. GNC Algorithm Development & Flight Code Generation

Lead the formulation, numerical simulation, and code implementation of advanced GNC algorithms, autopilot loops, Kalman filters, and trajectory optimization routines. Translate complex 6-DOF (Degrees of Freedom) flight dynamics models into deterministic, real-time C/C++ code executed on onboard flight processors. Evaluate missile maneuvering performance, dynamic stability, and guidance accuracy across subsonic through hypersonic regimes.

4. Software Architecture & Embedded Computer Engineering Architect

low-level embedded software frameworks for onboard flight computers, processing units (FPGA, DSP, SoC), and real-time communication buses. Implement performance-optimized C/C++ code, managing RTOS task prioritization, memory allocation, multi-core synchronization, and interrupt service routines. Conduct hardware/software co-design to ensure seamless interface timing between flight computers, Inertial Measurement Units (IMUs), seekers, and CAS drive electronics.

5. HWIL Development, Testing, & Root-Cause Analysis

Design, build, and maintain Hardware-in-the-Loop (HWIL) and Processor-in-the-Loop (PIL) simulation setups to test flight software against physical actuators and hardware under test. Implement Verification, Validation, and Accreditation (VV&A) procedures for simulation tools and test beds. Deploy to remote proving grounds and flight test ranges to support pre-flight checkouts, real-time telemetry decoding, and post-flight anomaly root-cause analysis for the Chief Engineer.

Required Qualifications & Technical Background Education
Education

B.S. with 25+ years, M.S. with 15+ years, or Ph.D. with 10+ years of hands-on experience in Aerospace, Mechanical, Electrical, Computer Engineering, or Computer Science.

Hands-on Development Track Record

Demonstrated experience as a lead technical developer or primary architect on at least one guided weapon, missile, or interceptor program from initial code/cad through flight test.

Mechanical & CAS Skills

Practical expertise in missile mechanical structures, aerothermal heating considerations, structural dynamics, and electromechanical actuator (EMA/CAS) integration.

GNC & Flight Mechanics

Advanced capability in control theory, 6-DOF modeling, trajectory design, and guidance implementation.

Software & Embedded Systems

Advanced proficiency in C / C++, Python, and MATLAB / Simulink (including automated flight code generation via Embedded Coder). Hands-on RTOS development (VxWorks, Linux PREEMPT_RT, Green Hills INTEGRITY) and embedded bus integration (MIL-STD-1553, ARINC 429, Ethernet/UDP, PCIe, CAN, SPI, RS-422).

Security Clearance

Must possess an active US DoW Secret security clearance

Desired Qualifications

Working knowledge of MIL-STD-882 (System Safety) or DO-178C software development practices. Experience interfacing directly with Chief Engineers, IPT Leads, and DoW customer technical teams during design reviews (PDR/CDR).

Radiance Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Subject Matter Expert (SME) & Lead Developer
Subject Matter Expert (SME) & Lead Developer

Radiance Technologies • Huntsville (AL)

On-site
USD 180,000 - 260,000
Senior/Principal Software Engineer
Senior/Principal Software Engineer

Radiance Technologies • Huntsville (AL)

On-site
USD 120,000 - 180,000
Subject Matter Expert (SME) & Lead Developer
Subject Matter Expert (SME) & Lead Developer

Radiance Technologies, Inc. • Huntsville (AL)

On-site
USD 190,000 - 260,000
Employee ownership
Mechanical/Aerospace Engineer
Mechanical/Aerospace Engineer

Radiance Technologies • Huntsville (AL)

On-site
USD 110,000 - 150,000
Senior Electrical Engineer
Senior Electrical Engineer

Radiance Technologies • Huntsville (AL)

On-site
USD 90,000 - 130,000
Chief Engineer with Security Clearance
Chief Engineer with Security Clearance

Radiance Technologies • Huntsville (AL)

On-site
USD 180,000 - 240,000
Senior SME & Lead Missile Systems Developer
Senior SME & Lead Missile Systems Developer

Radiance Technologies • Huntsville (AL)

On-site
USD 180,000 - 260,000
Senior GNC Software Engineer
Senior GNC Software Engineer

BlueHalo • Huntsville (AL)

On-site
USD 80,000 - 150,000
Senior SME & Principal Missile Systems Developer
Senior SME & Principal Missile Systems Developer

Radiance Technologies, Inc. • Huntsville (AL)

On-site
USD 190,000 - 260,000
Employee ownership
Chief Engineer
Chief Engineer

Radiance Technologies • Huntsville (AL)

On-site
USD 230,000 - 300,000