Structural Welder – FCAW | Night Shift

Stand-By Personnel, Inc.; Sapulpa (OK); On-site; USD 32,000 - 34,000; Full time

Benefits offered by this job

Temp-to-Hire

Job summary

Stand-By Personnel, Inc. is seeking an experienced Structural Welder for a night-shift temp-to-hire role in Sapulpa, OK. You will perform FCAW on structural steel components, read blueprints and welding symbols, and pass a vertical-up weld test.

The night shift runs 5:00 PM–5:00 AM, with possible overtime on Saturdays. Safety and quality are emphasized in a fast-paced production setting. The position requires dependable attendance, accurate welds, and the ability to work a 12-hour night shift

Qualifications

• FCAW welding experience on structural steel.
• Ability to read and interpret blueprints and welding symbols.
• Ability to pass the required weld qualification test.
• Experience with measuring tools and weld quality accuracy.

Responsibilities

• Perform FCAW on structural components per specifications.
• Weld and fabricate steel parts according to blueprints.
• Read fabrication blueprints and welding symbols; verify locations and orientation.
• Prepare materials and joints for welding; perform vertical-up welding.
• Inspect welds for defects; maintain quality and safety on a 12-hour shift.

Skills

FCAW structural welding

Welding symbols

Blueprint reading

Measuring tools

Weld test completion

Vertical-up welding

Quality control

Safety compliance

Job description

Structural Welder – FCAW | Night Shift Pay: $23.00 per hour + $2.00 Shift Differential Location: Sapulpa, OK Shift: 5:00 PM – 5:00 AM Schedule: Monday–Saturday | Occasional Saturdays as Needed Job Type: Temp-to-Hire Job Order #: 153251

Position Overview

Stand-By Personnel is seeking an experienced Structural Welder for a night-shift temp-to-hire opportunity in Sapulpa. This position performs Flux Core Arc Welding (FCAW) on structural steel components in a fast-paced production and fabrication environment. Candidates must have previous structural Flux Core welding experience, be able to read blueprints and welding symbols, and successfully complete the required vertical-up FCAW weld test. The ideal candidate is a dependable structural Welder who can consistently produce high-quality work while maintaining established safety and production standards throughout a 12-hour night shift.

Required Experience & Skills

• Previous FCAW structural welding experience required
• Ability to pass the required weld qualification test
• Structural steel fabrication experience
• Ability to read and interpret blueprints
• Ability to understand welding symbols
• Ability to accurately use measuring tools
• Strong attention to weld quality and accuracy
• Ability to follow welding specifications and production requirements
• Ability to maintain productivity throughout a 12-hour night shift
• Strong commitment to workplace and welding safety
• Reliable transportation required
• Dependable attendance and strong work ethic

Essential Duties & Responsibilities

• Perform structural welding using FCAW / Flux Core
• Weld and fabricate steel components according to specifications
• Read and interpret fabrication blueprints
• Follow applicable welding symbols
• Measure and position components as required
• Prepare materials and joints for welding
• Perform vertical-up welding
• Fill and cap weld joints
• Grind and prepare backside weld areas
• Inspect completed welds for visible defects
• Verify completed work meets quality requirements
• Correct applicable welding concerns
• Maintain consistent weld quality throughout production
• Follow established production standards
• Maintain clean and organized work areas
• Follow all company safety procedures and PPE requirements
• Perform additional structural welding and fabrication duties as assigned

FCAW / Flux Core Welding

Candidates must have hands‑on experience performing Flux Core Arc Welding on structural components. Responsibilities may include:

• Joint preparation
• Structural fit‑up support
• Tack welding
• Vertical‑up welding
• Multi‑pass welding
• Fill and cap operations
• Backside grinding
• Weld repair and cleanup
• Finished‑weld inspection

Required FCAW Weld Test

Candidates must successfully complete the required structural weld qualification test:

• Weld 3/8‑inch plate
• Weld in the vertical‑up position
• Fill and cap the front side
• Grind the backside
• Fill and cap the backside

Candidates should be prepared to demonstrate proper FCAW technique, penetration, consistency, and overall weld quality.

Blueprints & Weld Symbols

Candidates should be able to:

• Read structural fabrication blueprints
• Interpret welding symbols
• Identify required weld locations
• Follow applicable measurements
• Determine component orientation
• Follow welding specifications
• Verify completed work against production requirements

Quality Responsibilities

• Inspect completed welds for quality and accuracy
• Identify visible weld defects
• Maintain consistent workmanship
• Follow applicable welding requirements
• Complete repairs or rework when necessary
• Maintain attention to quality throughout extended production shifts
• Communicate quality concerns promptly
• Help prevent nonconforming work from advancing through production

Preferred Qualifications

• Structural Welder experience
• Advanced FCAW / Flux Core experience
• Structural steel fabrication experience
• Vertical‑up welding experience
• Heavy fabrication experience
• Blueprint‑reading experience
• Weld‑symbol knowledge
• Grinding and weld‑preparation experience
• Production welding experience

Physical Requirements

• Ability to stand for extended periods throughout the shift
• Frequent bending, kneeling, reaching, lifting, carrying, positioning, pushing, and pulling
• Manual dexterity and hand‑eye coordination required for welding
• Ability to safely handle structural steel components
• Comfortable performing physically active fabrication work throughout a 12-hour shift
• Ability to safely work around welding equipment, grinders, sparks, heat, metal, and industrial machinery
• Ability to wear all required PPE

Schedule Requirements

• Night Shift|5:00 PM – 5:00 AM
• Extended12-hour shifts
• Occasional Saturday work based on production needs

Candidates must be comfortable working overnight and maintaining consistent productivity, safety, and weld quality throughout the full shift.

Work Environment

• Structural steel fabrication and production environment
• Regular work around FCAW equipment, structural steel, grinders, and fabrication machinery
• Hands‑on position involving welding, material preparation, inspection, and fabrication
• Extended night‑shift schedule
• Strong emphasis on weld quality, safety, productivity, and dependable attendance

Why You’ll Want This Opportunity

• Starting pay of$23.00/hour
• Temp‑to‑hire opportunity
• Long‑term employment potential
• Consistent night‑shift hours
• Utilize specialized FCAW structural welding skills
• Hands‑on structural steel fabrication work
• Build additional vertical‑up and multi‑pass welding experience
• Excellent opportunity for an experienced Structural Welder looking for steady work in Sapulpa