Sr. Electrical Design Engineer III

Experis Austria; Redmond (WA); On-site; USD 83,000 - 103,000; Full time

Job summary

Experis is seeking a Sr. Electrical Design Engineer III in Redmond, WA to own digital board design end-to-end, from schematic through bring-up and validation. The role emphasizes high-speed digital design, signal integrity, and lab testing with a strong prefered Siemens Xpedition tool chain.

The successful candidate will collaborate with cross-functional teams on complex multi-layer PCBs, clocking, resets, and DMA/IO interfaces, delivering robust hardware for demanding applications.

Qualifications

• Bachelor’s degree in electrical engineering and hands-on digital hardware design experience.
• Ownership of a complex digital board from schematic through bring‑up and validation.
• Experience with high-speed digital design fundamentals and interfaces.

Responsibilities

• Design multi-layer digital PCBs with schematic capture and component selection.
• Define high-speed digital interfaces, pin planning, and interface budgeting.
• Own clocking, resets, boot/configuration, and I/O for the digital subsystem.
• Perform signal‑integrity analysis and translate results into routing constraints.
• Collaborate on routing with layout for dense, high-pin-count devices.
• Bring-up digital boards, test and debug hardware with lab instrumentation.
• Write test plans and drive root-cause analysis across operating conditions.
• Support hardware/firmware/software integration and documentation.

Skills

High-speed digital design

Signal integrity

Lab instrumentation

Schematic/PCB bring-up

Education

Bachelor’s degree in Electrical Engineering

Tools

Siemens Xpedition

Job description

$68.0/hourly Posted 2 days ago Less than 10 applies 2 min average apply

Experis

Redmond, WA 98052

Our client is seeking a Sr. Electrical Design Engineer III to join their team.

Job Title: Sr. Electrical Design Engineer III
Location: Redmond, WA

Pay Range: $68/hr.

What’s the Job?

About the Role:

We design advanced electronic hardware for demanding applications. We are hiring a digital/high-speed focused electrical engineer to own digital board design end-to-end - from schematic and interface definition through signal integrity, and into the lab for bring-up and validation. Experience with Siemens Xpedition EDM tools is strongly preferred.

What You'll Do:

• Design complex multi-layer digital PCBs: schematic capture, component selection, and design reviews for processor/FPGA/SoC-based boards.
• Define and constrain high-speed digital interfaces, including pin planning and interface budgeting.
• Own clocking, resets, boot/configuration, and general-purpose I/O for the digital subsystem.
• Perform signal-integrity analysis (pre- and post-layout) and translate results into routing and impedance constraints with layout.
• Partner with layout on routing of dense, high-pin-count devices.
• Own digitals bring-up: power-on hand-off, clocking, interface initialization, and link validation.
• Debug in the lab using appropriate high-speed instrumentation and a structured methodology.
• Write and execute functional and interface test plans across operating conditions; document results and drive root-cause of failures.
• Support hardware/firmware/software integration and debug.
• Contribute to manufacturing readiness: design-for-manufacturability/test, bring-up procedures, and documentation.

Our client is seeking a Sr. Electrical Design Engineer III to join their team.

Job Title: Sr. Electrical Design Engineer III
Location: Redmond, WA

Pay Range: $68/hr.

What’s the Job?

About the Role:

We design advanced electronic hardware for demanding applications. We are hiring a digital/high-speed focused electrical engineer to own digital board design end-to-end - from schematic and interface definition through signal integrity, and into the lab for bring-up and validation. Experience with Siemens Xpedition EDM tools is strongly preferred.

What You'll Do:

• Design complex multi-layer digital PCBs: schematic capture, component selection, and design reviews for processor/FPGA/SoC-based boards.
• Define and constrain high-speed digital interfaces, including pin planning and interface budgeting.
• Own clocking, resets, boot/configuration, and general-purpose I/O for the digital subsystem.
• Perform signal-integrity analysis (pre- and post-layout) and translate results into routing and impedance constraints with layout.
• Partner with layout on routing of dense, high-pin-count devices.
• Own digitals bring-up: power-on hand-off, clocking, interface initialization, and link validation.
• Debug in the lab using appropriate high-speed instrumentation and a structured methodology.
• Write and execute functional and interface test plans across operating conditions; document results and drive root-cause of failures.
• Support hardware/firmware/software integration and debug.
• Contribute to manufacturing readiness: design-for-manufacturability/test, bring-up procedures, and documentation.

Required Qualifications

• Bachelor’s degree in electrical engineering (or equivalent) and hands‑on digital hardware design experience.
• Demonstrated ownership of a complex digital board from schematic through bring‑up and validation.
• Strong high-speed digital design fundamentals.
• Experience with high-speed memory and/or high-speed serial interfaces.
• Proficiency with industry‑standard schematic capture and PCB (EDM) design tools. Siemens Xpeditions tool chain experience is strongly preferred.
• Hands‑on lab proficiency with high-speed test equipment and a structured debug methodology.
• Ability to read datasheets, reference manuals, and user guides and turn them into correct design decisions.

Preferred Qualifications

• Experience with processor/FPGA/SoC-based hardware design and associated toolchains.
  High-speed memory or serial‑interface design and bring‑up experience.
• Signal‑integrity simulation experience.
• Experience bringing up embedded processors/SoCs and working alongside firmware/software.
• High‑reliability or harsh‑environment design experience.
• Scripting for test automation and data analysis.

What Makes Someone Successful Here:

• Comfortable owning ambiguity - driving a digital subsystem from a blank schematic to a validated board.
• Bench‑strong: enjoys debugging hardware and chasing root cause, not just designing on paper
• Rigorous documentation and clear communication with cross‑functional teams.

What’s in it for me?

• Work on challenging, novel electrical design problems that require strong technical judgment and fast, effective execution.
• Collaborate with top engineers across multiple spacecraft design and integration teams, with regular cross‑functional interaction.
• Build real‑world expertise through board bring‑up, system test, design verification, qualification, and root‑cause analysis.
• Contribute to designs that support communities and organizations operating where dependable internet access is limited.
• Develop deeper capability across power, analog, mixed‑signal, and/or high‑speed design areas depending on your strengths.

Upon completion of waiting period consultants are eligible for:

• Medical and Prescription Drug Plans
• Dental Plan
• Vision Plan
• Health Savings Account
• Health Flexible Spending Account
• Dependent Care Flexible Spending Account
• Supplemental Life Insurance
• Short Term and Long Term Disability Insurance
• Business Travel Insurance
• 401(k), Plus Match
• Weekly Pay

Export Control Requirement

Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

$68.0/hourly Posted 2 days ago Less than 10 applies 2 min average apply