Shuttle Truck Driver 1

SITECH-Tejas

Irving (TX)

On-site

USD 25,000 - 36,000

Full time

1 hour ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

SITECH-Tejas is seeking a Shuttle Driver 1 for the 3rd shift (4:00 PM to 4:00 AM) to load, unload, and deliver parts across Holt Cat locations in Texas. You will ensure safety, complete DOT logs, and support warehouse duties as needed.

Responsibilities include securing loads, performing inspections, and maintaining a clean, compliant vehicle while traveling to multiple sites. A Class B CDL is required, with A preferred, and prior trailer experience is desired.

Qualifications

  • High school diploma or equivalent.
  • Valid Texas Driver’s License with Class B CDL; A preferred.
  • Three years’ experience operating a truck trailer combo.
  • DOT medical card/physical required.

Responsibilities

  • Safely load, unload, and deliver parts on schedule.
  • Secure cargo and ensure DOT compliance for safe transport.
  • Complete DOT logs daily and maintain a clean driving record.
  • Operate shuttle routes across Holt Cat locations; travel as needed.
  • Assist Parts Department and warehouse duties as required.

Skills

Manual transmission
Automatic transmission
DOT regulations
GPS reading
Vehicle inspections
Safety compliance
Record keeping

Education

High school diploma or equivalent

Job description

The Shuttle Driver 1 will safely load, unload, and deliver parts on a timely schedule as directed, to Shuttle System drop boxes and Stores along assigned route. This is to be performed while adhering to company safety regulations and state laws. Other duties may include, but are not limited to, assisting Parts Departments in sorting and other warehouse duties. Must be able to work 3rd Shift: 4:00 PM to 4:00 AM. Mus be able to operate manual transmissions.

Essential Functions
  • Responds to company needs in a positive, caring manner while striving form prompt, accurate and efficient transport of all shuttle shipments
  • Secures material on to truck and ensures that material meets state and federal guidelines for safe transport and vehicle capabilities, as measured by passing inspections through D.O.T. mobile and fixed scale locations.
  • Meet all state requirements and all Holt safety and health guidelines, as monitored by yearly management records.
  • Completes D.O.T. required drivers daily log accurately and without misrepresentation, and must not have more than three moving violations within a twelve-month period
  • Completes driver’s daily inspection report, making recommendations for repair or maintenance
  • Responsible for the clean appearance of the company assigned vehicle
  • Travels to all HOLT CAT locations, and work multiple days or weeks at those locations
  • Works with Parts Systems Manger on various projects
  • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards
  • Performs other duties as assigned

The incumbent in this position is expected to model the following practices daily: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development.

Entry-level position – Generally has at least three years of experience and/or demonstrated job relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform the functions of the job under immediate supervision.

Knowledge, Skills, and Abilities
  • Basic knowledge of transportation, and safe driving procedures
  • Knowledge and understanding of Motor Carrier Safety Regulations/DOT guidelines
  • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems
  • Must be able to driver both manual and automatic transmissions
  • Knowledge of machines and tools, including their designs, uses, repair, and maintenance
  • Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction
  • Quality control analysis skills - conducting tests and inspections of products, services, or processes to evaluate quality or performance
  • Operation and control skills - controlling operations of equipment or systems
  • Equipment selection skills - determining the kind of tools and equipment needed to do a job
  • The ability to adjust the controls of a machine or a vehicle quickly and repeatedly to exact positions
  • Ability to read maps and operate GPS systems
  • Ability to maintain a clean driver’s record and diligent attention to safety
  • Ability to operate hand tools, power tools, and equipment used in mechanical repair
  • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble small objects
  • The ability to read and understand information and ideas presented in writing
  • The ability to listen to and understand information and ideas presented through spoken words and sentences
  • Ability to learn fork lift operations
  • Required to adapt to our safety culture
Requirements
Education and License:
  • High school or equivalent diploma preferred
  • Valid Texas Driver’s License with Class B CDL, Class A CDL preferred, to include the ability to maintain the Valid Texas Driver’s License
  • Driver must be qualified and certified for vehicle operation
  • Good driving record required
  • Must have at least 3 years’ experience operating a truck trailer combo
Supervisory Responsibilities
  • None
Travel
  • Travel up to 100%
Physical Requirements
  • Must be able to acquire and retain a DOT physical/medical card, MSHA certificate and fork lift license.
  • Must be able to remain in a stationary position 100% of the time
  • Must be able to routinely lift up to 50 pounds
  • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue
  • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina
  • Ascend/descend with gradual or continuous progress by oneself, using both hands and feet and climb up and down ladders
  • Be able to safely maneuver and work underneath equipment
  • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work
Work Environment
  • Requires working in a closed vehicle or equipment
  • Requires wearing common protective or safety equipment
  • Requires working outdoors, exposed to all weather conditions including extreme conditions such as heavy rain, wind, or excessive temperatures
  • Includes exposure to sounds and noise levels that are distracting or uncomfortable
  • Exposure to small quantities of chemicals, steam, high-pressure water, and high-speed rotating equipment
  • Significant time spent in confined spaces and/or high places

Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

#HOLTCG

About HOLT CATHOLT CATHOLT Cat is the authorized Caterpillar® heavy equipment and engine dealer for 118 counties in South, Central, North and East Texas. Established in 1933, HOLT sells, services and rents Cat equipment, engines, generators and trucks for construction, mining, industrial, petroleum and agricultural applications. HOLT sells Caterpillar used equipment worldwide and fabricates its own line of custom engineered products including land management products and water tankers. Additionally, HOLT is a dealer for Link-Belt® Cranes, Trimble® Heavy and Highway construction products and AccuGrade® grade-control systems.

The Holt name has been associated with heavy equipment and Caterpillar for over 100 years. HOLT CAT owners, Peter J. Holt and Corinna Holt Richter are direct descendants of Benjamin Holt, who in 1904 developed the first successful track-type tractor which he named the “Caterpillar.” HOLT CAT has come to be synonymous with quality, integrity and commitment to customer service.

The HOLT CAT team is committed to providing rock solid stability with superior products and services from The Red River to the Rio Grande™.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Shuttle Truck Driver 1
Shuttle Truck Driver 1

HOLT Group • Irving (TX)

On-site
USD 25,000 - 39,000
Shuttle Truck Driver 1
Shuttle Truck Driver 1

Holt Co. • Irving (TX)

On-site
USD 42,000 - 64,000
Shuttle Truck Driver 2 - Swing Shift
Shuttle Truck Driver 2 - Swing Shift

SITECH-Tejas • Irving (TX)

On-site
USD 50,000 - 75,000
Shuttle Truck Driver 2 - SWING SHIFT
Shuttle Truck Driver 2 - SWING SHIFT

HOLT CAT • Irving (TX)

On-site
USD 45,000 - 65,000
Heavy Haul Truck Driver 3
Heavy Haul Truck Driver 3

SITECH-Tejas • Irving (TX)

On-site
USD 70,000 - 95,000
Heavy Haul Driver 4
Heavy Haul Driver 4

Holt Co. • Irving (TX)

On-site
USD 65,000 - 95,000
Heavy Haul Driver 4
Heavy Haul Driver 4

Holt Co. • Fort Worth (TX)

On-site
USD 70,000 - 100,000
Heavy Haul Driver 4
Heavy Haul Driver 4

Holt Co. • Aubrey (TX)

On-site
USD 60,000 - 90,000
Yard Operations Associate 1
Yard Operations Associate 1

Holt Co. • Waco (TX)

On-site
USD 42,000 - 65,000
Shop Supervisor 1
Shop Supervisor 1

HOLT CAT • Tyler (TX)

On-site
USD 70,000 - 95,000