Robotic Weld Engineer

International Motors Manufacturing

San Antonio (TX)

Sur place

USD 95 000 - 120 000

Plein temps

Il y a 12 jours

Une candidature complète en une minute

Un CV et une lettre de motivation personnalisés, prêts à envoyer.

Passez les filtres ATS

Avantages offerts par ce poste

Shift differential 10%

Résumé du poste

International Motors Manufacturing seeks a Robotic Weld Engineer for the night shift in San Antonio, TX. You will act as the welding technical expert on the floor, tackling robotic and manual welding issues, leading containment and corrective actions, and driving improvements in quality, safety, and efficiency.

You’ll optimize weld processes, support Fanuc robot programming, and collaborate with Operations, Maintenance, Quality, and Engineering to ensure production readiness and robust welding

Qualifications

  • Hands-on welding experience on robotic and manual welding cells in production.
  • Experience diagnosing weld defects and leading containment and permanent corrective action.
  • Experience with destructive testing, weld-quality validation, and using process data to identify failure modes.
  • Proven ability to program, troubleshoot, and repair Fanuc robots in welding applications.
  • Experience adjusting weld schedules and process parameters to improve weld quality and stability.
  • Knowledge of industrial electrical systems from 24 VDC to 480 VAC and related controls.
  • Experience with Allen-Bradley PLCs (SLC, CompactLogix, ControlLogix) using RSLogix 500/5000 and Studio 5000.

Responsabilités

  • Serve as the second-shift welding technical expert, resolving robotic and manual welding issues on the production floor.
  • Troubleshoot robotic weld cells, weld schedules, process parameters, fit-up, and equipment issues.
  • Lead weld repair and containment when defects threaten production, ensuring repairs follow approved methods and quality standards.
  • Own weld tear-down evaluations and use findings to identify failure modes and drive corrective actions.
  • Lead root cause analysis and permanent corrective action for weld failures and fit-up concerns.
  • Optimize welding processes to improve weld quality, cycle time, throughput, uptime, safety, and cost.
  • Support robot programming and troubleshooting, with Fanuc experience preferred.
  • Partner with Operations, Maintenance, Quality, Engineering, and suppliers on welding issues and improvements.
  • Support launches, equipment commissioning, process validation, and production readiness to establish stable welding processes.

Connaissances

Robotic welding
Fanuc robotics
Root cause analysis
Welding process optimization
Electrical troubleshooting
Allen-Bradley PLCs troubleshooting

Outils

Fanuc robots
RSLogix 500/5000
Studio 5000

Description du poste

International Motors is hiring a Robotic Weld Engineer - Night Shift in San Antonio, TX!Are you passionate about robotics, welding technology, and manufacturing automation? Join International Motors in a hands-on, high-impact role where you’ll optimize robotic weld cells, support FANUC robotic systems, and drive improvements across advanced manufacturing operations.As the primary Weld Engineering resource on night shift, you’ll work directly on the production floor to troubleshoot automation and welding challenges, minimize downtime, restore production, and implement lasting solutions that improve safety, quality, and operational performance.As International Motors continues to grow in San Antonio, we are expanding our production operations with the introduction of a night production shift. The night shift is Monday through Thursday from 5:30 PM to 4:00 AM, with production planned to begin in early 2027. This is a salaried position supporting a manufacturing operation. While the primary schedule aligns with the designated production shift, employees are expected to provide operational support as needed to meet business objectives. This may require working outside normal production hours, including extended shifts, production startup activities, recovery efforts, and occasional weekend support based on operational requirements.**Responsibilities:**Serve as the second-shift welding technical expert, resolving robotic and manual welding issues hands-on on the production floor.Troubleshoot robotic weld cells, weld schedules, process parameters, fit-up, and equipment issues.Lead weld repair and containment when defects threaten production, applying hands-on manual welding expertise.Ensure repairs for cold welds, holes, missing welds, and other defects follow approved methods and quality standards.Own weld tear-down evaluations and use findings to identify failure modes and drive corrective actions.Lead root cause analysis and permanent corrective action for weld failures and fit-up concerns.Optimize welding processes to improve weld quality, cycle time, throughput, uptime, safety, and cost.Read and apply weld schedules, drawings, specifications, and process requirements.Support robot programming and troubleshooting, with Fanuc experience preferred.Partner with Operations, Maintenance, Quality, Engineering, and suppliers on welding issues and improvements.Support launches, equipment commissioning, process validation, and production readiness to establish stable welding processes as operations grow.Desired Skills:Hands-on experience with manual and robotic welding in production or fabrication, including weld repair and technical oversight of repairs.Experience diagnosing weld defects—including cold welds, holes, and missing welds—and leading containment, repair, and permanent corrective action.Experience with destructive testing, weld-quality validation, and process data to identify failure modes and prevent recurrence.Proven hands-on experience programming, troubleshooting, and repairing Fanuc robots in robotic welding applications.Experience adjusting weld schedules, process parameters, and fit-up to improve weld quality and process stability.Manufacturing experience in automotive, truck, heavy equipment, or high-volume body shop operations.Experience safely troubleshooting industrial electrical systems from 24 VDC to 480 VAC, along with pneumatic, hydraulic, and automation equipment.Experience troubleshooting Allen-Bradley PLCs (SLC, CompactLogix, and ControlLogix) using RSLogix 500, RSLogix 5000, and Studio 5000.Demonstrated ability to lead root cause analysis and communicate corrective actions across Operations, Maintenance, Quality, and Engineering.Experience independently resolving production-floor welding issues and making sound technical decisions through containment, repair, and resolution.Shift Differential: 10% differential upon transitioning to Night Shift work schedule.
Obtenez votre examen gratuit et confidentiel de votre CV.

ou faites glisser et déposez votre fichier ici.

Similar jobs

Postes similaires à comparer

Robotic Weld Engineer - Night Shift (FANUC)
Robotic Weld Engineer - Night Shift (FANUC)

International Motors, LLC • Von Ormy (TX)

Sur place
USD 95 000 - 115 000
Night-Shift Robotic Weld Engineer | Fanuc Automation Expert
Night-Shift Robotic Weld Engineer | Fanuc Automation Expert

International Motors Manufacturing • San Antonio (TX)

Sur place
USD 95 000 - 120 000
Shift differential 10%
Night-Shift Robotic Weld Engineer (FANUC)
Night-Shift Robotic Weld Engineer (FANUC)

International Motors, LLC • San Antonio (TX)

Sur place
USD 90 000 - 126 000
Shift differential 10%
Night Shift Robotic Weld Engineer — FANUC
Night Shift Robotic Weld Engineer — FANUC

Navistar, Inc. • San Antonio (TX)

Sur place
USD 90 000 - 115 000
Night shift differential
Robotic Weld Engineer - Night Shift
Robotic Weld Engineer - Night Shift

International • Von Ormy (TX)

Sur place
USD 95 000 - 115 000
Robotic Weld Engineer - Night Shift
Robotic Weld Engineer - Night Shift

Navistar • San Antonio (TX)

Sur place
USD 90 000 - 115 000
Night shift differential
Robotic Weld Engineer - Night Shift
Robotic Weld Engineer - Night Shift

International Motors, LLC • San Antonio (TX)

Sur place
USD 90 000 - 126 000
Shift differential 10%
Robotic Weld Engineering Specialist
Robotic Weld Engineering Specialist

Steel & O'Brien Manufacturing • Town of Hartford (WI)

Sur place
USD 70 000 - 95 000
Robotics Paint Engineer - Night Shift Lead
Robotics Paint Engineer - Night Shift Lead

International • Von Ormy (TX)

Sur place
USD 90 000 - 120 000
Manufacturing Engineer (Robotic Weld)
Manufacturing Engineer (Robotic Weld)

Std Iron • Minnesota

Hybride
USD 70 000 - 110 000