Rigger

BOSS Crane; Dayton (TX); On-site; USD 30,000 - 47,000; Part time

Job summary

Boss Crane is seeking a Rigger to support heavy haul, jack-and-slide operations, and HT-500 jacking tasks on industrial sites in Dayton, TX. The role requires hands-on rigging hardware setup, load movement, and adherence to safety protocols under supervision.

The ideal candidate has 1–3 years of rigging experience, familiarity with hydraulic jacking systems, and OSHA 10 certification. Travel to job sites and willingness to work variable shifts are expected.

Qualifications

• Minimum 1–3 years of rigging experience.
• Hands-on experience with heavy haul, jacking, or skidding.
• Familiarity with rigging hardware and load calculations.

Responsibilities

• Set up, inspect, and operate rigging hardware including slings, shackles, spreader bars, chain falls, come-alongs, and wire rope.
• Set up and operate HT-500 hydraulic jacks and jack-and-slide systems, including skid beams/shoes and Teflon/steel slide surfaces.
• Assist in the setup and operation of hydraulic gantries and SPMTs as needed.
• Support jack-and-slide operations on the HT-500 system, including skid track placement, alignment, hydraulic pump operation, and monitoring jacks during load transfer.
• Attach and detach rigging hardware to loads per lift plan instructions and supervisor direction.
• Perform load spotting, tag line handling, and positioning during lifts, jacking, and sliding moves.
• Assist with blocking, cribbing, and shoring as required for jacking and load support.

Skills

Rigging experience

Heavy haul experience

HT-500 jacking

Load calculations

Signal communication

Safety procedures

Education

NCCCO Rigger/Signal Person certification

OSHA 10 certification

Tools

HT-500 jack-and-slide system

SPMTs

Rigging hardware setup

Job description

Rigger# RiggerBOSS Dayton - Dayton, TX 77535## OverviewPosition TypeTemporaryJob ShiftAnyEducation LevelHigh SchoolTravel PercentageNoneCategorySkilled Labor - Trades## DescriptionJob Description: Rigger*Heavy Haul, Jacking & HT-500 Jack-and-Slide Operations***Job Title:** Rigger**Department:** Rigging / Heavy Lift & Transport Operations**Reports To:** Boss Rigger / Rigging Foreman / Project Superintendent## Job SummaryThe Rigger performs hands-on rigging tasks in support of heavy haul, hydraulic jacking, and jack-and-slide operations utilizing HT-500 jacking and skid systems. This role is responsible for safely setting up, operating, and tearing down rigging hardware, HT-500 jacks, and skid systems under the direction of the Boss Rigger or Rigging Foreman. The Rigger follows engineered lift plans and site safety procedures to move, lift, jack, and skid heavy equipment, structures, and modules.## Key Responsibilities***Rigging & Heavy Haul Operations**** Set up, inspect, and operate rigging hardware including slings, shackles, spreader bars, chain falls, come-alongs, and wire rope.* Set up and operate HT-500 hydraulic jacks and jack-and-slide systems, including skid beams/shoes and Teflon/steel slide surfaces.* Assist in the setup and operation of hydraulic gantries and SPMTs (self-propelled modular transporters) as needed.* Support jack-and-slide operations on the HT-500 system, including skid track placement, alignment, hydraulic pump operation, and monitoring jacks during load transfer.* Attach and detach rigging hardware to loads per lift plan instructions and supervisor direction.* Perform load spotting, tag line handling, and positioning during lifts, jacking, and sliding moves.* Assist with blocking, cribbing, and shoring as required for jacking and load support.***Safety & Compliance**** Follow all OSHA, ASME B30 series standards, and site-specific safety procedures during rigging and HT-500 jack-and-slide operations.* Conduct pre-use inspections of rigging gear and HT-500 jacking equipment; report defective or damaged equipment immediately.* Participate in pre-job safety meetings (JSAs/tailgate meetings) and follow all instructions from the Boss Rigger or Foreman.* Maintain awareness of pinch points, load stability, and ground bearing conditions during jacking and sliding operations.* Wear and properly use required PPE at all times.***Coordination & Communication**** Communicate clearly with crane operators, equipment operators, and fellow riggers using proper hand signals and radio protocol.* Work as part of a crew to safely execute heavy haul, jacking, and HT-500 skidding moves per the lift plan.* Report any unsafe conditions, equipment issues, or deviations from the plan to the Boss Rigger or Foreman immediately.## Qualifications## Required Qualifications* Minimum 1–3 years of rigging experience; heavy haul, jacking, or skidding experience preferred.* Hands-on experience operating HT-500 jack-and-slide systems strongly preferred.* Working knowledge of rigging hardware, sling angles, and basic load calculations.* Rigger/Signal Person certification (NCCCO or equivalent) preferred or required per site.* Familiarity with hydraulic jacking systems, skid systems, or SPMTs a plus.* OSHA 10 certification (OSHA 30 a plus).* Ability to follow verbal and written instructions and work safely as part of a team.## Physical Requirements* Ability to work outdoors in all weather conditions, at heights, and in confined or industrial environments.* Capable of lifting up to 50 lbs, climbing, bending, kneeling, and standing for extended periods.* Willingness to travel to job sites, including extended assignments.## Work Environment* Industrial, refinery, power plant, marine, or heavy construction sites.* Exposure to noise, heavy machinery, outdoor elements, and elevated work areas.* May require night shifts, weekend work, or extended hours during critical lift/move windows.www.bosscrane.com