Quality Engineer

VIVA USA Inc

Milwaukee (WI)

On-site

USD 70,000 - 110,000

Full time

1 hour ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Equal opportunity employer

Job summary

VIVA USA Inc. supports deployment of the Quality strategy through direct execution of project Quality activities at supplier, integrator, test, and customer-site locations.

The role develops and implements Project Quality Plans and performs various inspections, coordinating FAT/IFAT and corrective-action closure to ensure shipment readiness. Responsibilities include reviewing drawings and records, validating conformity, and providing quality reporting to PMO, Engineering, and customers.

Qualifications

  • Bachelor degree in engineering, quality, manufacturing, or a related technical discipline, or equivalent technical education and relevant experience.
  • 3-5 years, Relevant experience with low- and medium-voltage electrical distribution equipment, eHouses/PDCs, industrial fabrication, integration, manufacturing Quality, or field Quality.
  • Ability to read and interpret single-line diagrams, general arrangements, schematics, wiring diagrams, equipment drawings, weld documentation, and inspection/test records.
  • Working knowledge of structured problem solving, NCR/SCAR processes, corrective action, and objective evidence.
  • Effective written and verbal communication with suppliers, customers, Engineering, PMO, and field teams.

Responsibilities

  • Develop and execute Project Quality Plans, inspection plans, hold points, and witness-point activities for assigned projects.
  • Perform supplier, integrator, in-process, pre-IFAT, IFAT, pre-shipment, and site inspections as assigned.
  • Review current drawings, specifications, ITPs, travelers, material records, calibration records, and applicable supplier Quality documentation.
  • Verify structural and mechanical conformity, including dimensions, leveling, squareness, equipment installation, welding records, coating records, and traceability documentation.
  • Verify electrical integration against approved drawings and requirements, including grounding and bonding, conductor identification, terminations, clearances, cable routing, equipment labeling, and documented test results.
  • Coordinate NCR, SCAR, punch-list, containment, corrective-action, and closure-evidence activities.
  • Confirm required checklists, signatures, test records, redlines, and shipment-readiness documentation are complete.
  • Provide clear Quality reporting to PMO, Engineering, suppliers, customers, and Quality leadership.
  • Comply with applicable HSE controls, electrical safe-work requirements, PPE, LOTO, testing boundaries, and clientprocedures.
  • Capture lessons learned and support prevention of recurring project and supplier issues.

Skills

Inspection planning
NCR/SCAR processes
Effective communication
Reading engineering drawings

Education

Bachelor degree in engineering or quality

Tools

FAT/IFAT experience
Calibration records handling
Welding inspection per AWS CWI

Job description

Job Description Summary Supports deployment of the Quality strategy through direct execution of project Quality activities at supplier, integrator, test, and customer-site locations. Develops and implements Project Quality Plans; performs structural, mechanical, electrical, and documentation inspections; coordinates FAT and IFAT activities; identifies nonconformances; and drives corrective-action and punch-list closure. Maintains complete project Quality records and provides objective evidence supporting shipment readiness and customer requirements.

Core Responsibilities
  • Develop and execute Project Quality Plans, inspection plans, hold points, and witness-point activities for assigned projects.
  • Perform supplier, integrator, in-process, pre-IFAT, IFAT, pre-shipment, and site inspections as assigned.
  • Review current drawings, specifications, ITPs, travelers, material records, calibration records, and applicable supplier Quality documentation.
  • Verify structural and mechanical conformity, including dimensions, leveling, squareness, equipment installation, welding records, coating records, and traceability documentation.
  • Verify electrical integration against approved drawings and requirements, including grounding and bonding, conductor identification, terminations, clearances, cable routing, equipment labeling, and documented test results.
  • Coordinate NCR, SCAR, punch-list, containment, corrective-action, and closure-evidence activities.
  • Confirm required checklists, signatures, test records, redlines, and shipment-readiness documentation are complete.
  • Provide clear Quality reporting to PMO, Engineering, suppliers, customers, and Quality leadership.
  • Comply with applicable HSE controls, electrical safe-work requirements, PPE, LOTO, testing boundaries, and clientprocedures.
  • Capture lessons learned and support prevention of recurring project and supplier issues.
Qualifications / Requirements
  • Bachelor degree in engineering, quality, manufacturing, or a related technical discipline, or equivalent technical education and relevant experience.
  • 3-5 years, Relevant experience with low- and medium-voltage electrical distribution equipment, eHouses/PDCs, industrial fabrication, integration, manufacturing Quality, or field Quality.
  • Ability to read and interpret single-line diagrams, general arrangements, schematics, wiring diagrams, equipment drawings, weld documentation, and inspection/test records.
  • Working knowledge of structured problem solving, NCR/SCAR processes, corrective action, and objective evidence.
  • Effective written and verbal communication with suppliers, customers, Engineering, PMO, and field teams.
Preferred Qualifications
  • Experience with FAT/IFAT execution, electrical distribution equipment, supplier Quality, or integrated eHouse/PDC projects.
  • Knowledge of NEC, OSHA electrical safety expectations, AWS structural welding documentation, coating inspection, and calibration control.
  • ASQ CQE, supplier Quality, welding inspection, coating inspection, or electrical testing credentials appropriate to assigned scope.
Certifications and Role Readiness
  • Required at hire or within the role-readiness period established with HR and Quality leadership:
  • The clientelectrical safety qualification appropriate to assigned responsibilities, including ECAP Level 3 and PICW when the employee is expected to perform or control applicable electrical work.
  • OSHA 30 or equivalent construction/industrial safety training for regular supplier and field activity.
  • Current CPR/AED/First Aid where required by site or HSE expectations.
  • For structural/welding inspection scope: AWS CWI is preferred for personnel independently accepting weld quality; otherwise the QE verifies supplier CWI, WPS/PQR, welder qualifications, weld maps, and NDE records and escalates acceptance questions to qualified personnel.
  • For electrical testing scope: manufacturer or employer-authorized training for Megger, ductor/contact resistance, and dielectric/hipot test witnessing; NICET Electrical Power Testing may be considered as a preferred external credential where the assigned scope warrants it.
  • For coating scope: AMPP coating inspector training or equivalent may be preferred when independent coating acceptance is a material part of the role.
Travel and Work Environment
  • Requires travel to suppliers, integrators, factories, IFAT locations, and customer sites, including short-notice travel based on project schedules.
  • Work may occur around active fabrication, testing, energized-equipment controls, construction, and shipping activities.
HR Leveling Notes
  • Level based on independence, technical breadth, equipment complexity, decision authority, and ability to lead inspections without direct supervision.
  • Higher-level placement should reflect demonstrated MV/eHouse integration capability, IFAT leadership, customer-facing responsibility, and ownership of complex NCR/SCAR closure.
  • Do not use certification count alone to determine level; evaluate applied scope, authority, complexity, and business impact.
Internal Alignment Note

This draft is designed for Workday and HR review. Final job profile, grade, compensation range, required credentials, and timing for completion remain subject to HR, Legal, HSE, and functional approval.

VIVA is an equal opportunity employer. All qualified applicants have an equal opportunity for placement, and all employees have an equal opportunity to develop on the job. This means that VIVA will not discriminate against any employee or qualified applicant on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Quality Engineer 2
Quality Engineer 2

The Fountain Group • Houston (TX)

On-site
USD 57,000 - 81,000
Senior E&I SQS Coordinator - Anchorage, AK
Senior E&I SQS Coordinator - Anchorage, AK

UNAVAILABLE • Anchorage (AK)

On-site
USD 120,000 - 180,000
Field Quality Lead: Electrical Construction
Field Quality Lead: Electrical Construction

Quanta Infrastructure Solutions Group • Adelanto (CA)

On-site
USD 66,000 - 86,000
Competitive Compensation
Comprehensive Health Coverage
24/7 telehealth
+5
I&E Field Quality Control Manager
I&E Field Quality Control Manager

UPS Industrial Services, LLC. • Deer Park (TX)

On-site
USD 120,000 - 160,000
Senior E&I SQS Coordinator - Anchorage, AK
Senior E&I SQS Coordinator - Anchorage, AK

NANA Worley • Anchorage (AK)

On-site
USD 90,000 - 130,000
Employee referral program
Quality Control Supervisor
Quality Control Supervisor

H&MV Engineering • Dallas (TX)

On-site
USD 90,000 - 130,000
Equal Opportunity Employer
Traveling Quality Control Specialist- Haskell, TX (34288)
Traveling Quality Control Specialist- Haskell, TX (34288)

CEC • Haskell (TX)

On-site
USD 70,000 - 100,000
Traveling Quality Control Specialist- Haskell, TX (34288)
Traveling Quality Control Specialist- Haskell, TX (34288)

CEC FACILITIES LLC • Haskell (TX)

On-site
USD 60,000 - 90,000
Construction QA Lead - Electrical & Instrumentation
Construction QA Lead - Electrical & Instrumentation

Burns & McDonnell • Kansas City (MO)

On-site
USD 80,000 - 120,000
Site Quality Specialist
Site Quality Specialist

VIVA • Delta (UT)

On-site
USD 70,000 - 100,000
On-Site Position
40 hr / week