Production Operator I Cabling

Paycom - ATS; Culpeper (VA); On-site; USD 45,847,000 - 57,308,000; Full time

Job summary

Paycom - ATS in the United States is seeking a manufacturing machine operator responsible for setup, operation, and monitoring of production equipment. You will follow standard work, verify tooling, and ensure safety guards are in place.

You will handle materials, perform quality checks, document results, and communicate with QA and shifts. The role requires attention to detail, ability to lift up to 35 pounds, and adherence to PPE and lockout/tagout procedures.

Qualifications

• Requires high attention to detail to prevent production errors.
• High School Diploma or GED preferred.
• Prior experience as a manufacturing machine operator is desirable.

Responsibilities

• Set up and operate machines per job specifications.
• Verify materials and tooling loaded correctly.
• Perform pre-operational checks and ensure safety guards in place.
• Load/unload materials and stage per job traveler.
• Record production data and pass down in-process conditions.
• Communicate status and issues to QA or supervisors.
• Perform light maintenance and keep area clean.
• Follow lockout/tagout and PPE protocols.

Skills

Attention to detail

Education

High School Diploma or GED

Job description

Job SummaryThis role is primarily focused on the set up, operation, and monitoring of processes on one or more machines. Associates will also complete required documentation of process steps per standard work and job specifications..Essential Job Duties/Functions (Not all inclusive):Machine Setup and OperationPrepare and set up equipment according to job specificationsVerify correct materials and tooling are loadedPerform pre-operational checks and ensure safety guards are in placeMaterial HandlingLoad/unload spools, reels, and rods safely and efficientlyStage materials as required per job travelerEnsure correct rod types and components are used for specific cable constructionsIn-Process Quality ChecksCut and submit samples to QA as required by standard work (e.g., after setup, each spool, or per shift)Visually inspect cable for defects (e.g., insulation damage, misalignment, surface contamination)Use micrometers, calipers, or other gauges to measure critical dimensionsProcess MonitoringWatch machines closely during production for jams, misfeeds, or other abnormalitiesMonitor for correct tension, alignment, and application of armor, tape, or jacketingAdjust settings as necessary within authorized parametersDocumentation & TraceabilityAccurately record production data, spool numbers, lot numbers, and test resultsComplete job travelers and inspection formsReport production output and any deviations or nonconformancesCommunication & HandoffsCommunicate clearly with QA, supervisors, and other shifts regarding status, issues, or changesDocument and pass down in-process conditions during shift changeMaintenance & HousekeepingPerform minor machine maintenance and cleaning (e.g., clearing wire paths, changing tooling)Keep work area clean, organized, and free from trip hazardsReport any machine malfunctions or safety concerns immediatelySafety & ComplianceFollow all safety protocols including PPE requirementsLockout/tagout as requiredFollow all standard work, process instructions, and quality proceduresAdditional duties as assignedEducationHigh School Diploma or GED preferredWork ExperiencePrior experience as a manufacturing machine operator is desirableRequired & Preferred Skills and CompetenciesRequires a high degree of attention to detail, as even small errors can result in significant problems during the manufacturing process.Work EnvironmentThe work environment and physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job with or without reasonable accommodation.The work setting is in a typical manufacturing environment that requires the use of personal protective equipment including safety-toe shoes with metatarsal guards, safety glasses, and hearing protection. Manufacturing areas may be affected by outside temperatures and machining.Physical DemandsThe physical demands represent those required to successfully perform the essential functions of this job with or without reasonable accommodation.Must be able to: sit, kneel, crouch, stoop, stand, walk, climb ramps and/or stairs; read and write, work with a computer and keyboard; hear, understand, and distinguish speech and/or other sounds (e.g., machinery, sirens, and alarms); speak to express or exchange ideas, impart oral information to include instructions; vision abilities include close vision, distance vision, peripheral and depth perception.Must be able to lift up to 35 pounds.