PCM Certified Repairman

Ameren

Maryland Heights (MO)

Presencial

USD 62.000 - 88.000

Jornada completa

14 días+

Una candidatura completa en un minuto

Currículum y carta de presentación personalizados, listos para enviar.

Supera los filtros ATS

Descripción de la vacante

Ameren Missouri is seeking skilled repair personnel for welding, brazing and cutting on powerplant equipment. Work includes operating welding and cutting processes, following ASME codes, safety protocols, and providing direction to apprentices when required.

The role involves testing weld procedures, reading drawings, and preparing work reports. It requires staying on a rotating or day schedule and adhering to strict safety standards in a heavy industrial setting.

Formación

  • Qualification standards as established in the Apprenticeship Program.
  • Must pass prescribed welder qualification tests in accordance with ASME Section IX.
  • Must be accurate, steady and calm in emergencies; possess normal physical strength and endurance; and have no color deficiency in vision.

Responsabilidades

  • General range of highly skilled electric arc, gas welding, brazing and cutting on boiler pressure parts, pressure vessels, and piping.
  • Inspect and repair boiler components, piping and valves following ASME codes and safety requirements.
  • Prepare reports and set up rigging, lifting equipment, and scaffolds; work from drawings and sketches.

Descripción del empleo

About Ameren Missouri

Ameren Missouri has been providing electric and gas service for more than 100 years, and our electric rates are among the lowest in the nation. Ameren Missouri’s mission is to power the quality of life for our 1.2 million electric and 132,000 natural gas customers in central and eastern Missouri. Our service area covers 64 counties and more than 500 communities including the greater St. Louis area

Position(s): 2

Hourly Rate Range: $54.56

Revision Date: 8/11/1985

Area/Div: 1601

DUTIES:

Under direct, indirect, or intermittent supervision, and working on a rotating shift schedule orday schedule as required, to do a general range of highly skilled electric arc, gas welding andcutting, brazing, pipefitting and insulation installation and/or removal on all varieties of powerplant equipment. Immediate responsibility at times for the working direction of an apprentice. Work includes a general range of highly skilled electric and gas welding brazing and cutting onboiler pressure parts, pressure vessels, and piping in accordance with the applicable ASME codesand which are subject to insurance underwriters inspection and certification requirements. Inaddition, perform other maintenance work on heavy mechanical equipment such as repair orreplacement of leaking or weakened boiler tubes; structural steel erection; replacement of linerplates in fans, coal chutes and hoppers; welding repairs to castings and equipment; fitting andwelding of all sizes of piping and valves, including items such as measuring, laying out, cutting,threading, bending, fitting and installation of pipe and tubing, replacement of flange, valve, andheater gaskets; valve repacking, repair and overhaul; cleaning and replacement of condenser andheat exchanger tubes; where applicable, the repair of traveling water screens. Refractory andinsulation work includes items such as but not limited to furnace wall insulation and protective covering; insulation coverings on furnace wall fire sidelinings, slag tanks and hoppers; gas and hot air ducts and breeching; precipitator casings, main,reheat, and extraction steam lines; boiler feed piping; steam and condensate drains; feedwaterheaters and storage tanks; turbine casings, steam chests and valves. In connection with this work:
Take welder qualification tests as required.

Qualify welding procedures as required.
Work from drawings and sketches.
Check (including Workman’s Protection Assurance where appropriate) to insure that equipment to beworked on has been properly isolated and protected.
Obtain required materials from storeroom. Set up rigging and operate lifting equipment.

Erect andwork from scaffolds.
Operate and/or use mobile equipment, shop equipment, portable power tools, other portable tools,hand tools and test equipment as required to accomplish assigned jobs.
Prepare reports of work done accompanied by sketches, if necessary; complete
such forms as may be required.

Work alone or in combination with other Repairman (Certified) or Repairman classifications whenassigned.
Do similar and less skilled work as required.

SPECIAL RESPONSIBILITIES:

For carrying out prescribed safety precautions and safeguards for the protection of himself andothers.
When necessary, check for explosive gases before operating torches.
For observing and insuring that those temporarily under his direction observe safety instructionsissued or applicable.
For performing work without disturbing other equipment. For executing orders quickly and properly.
For accuracy of work within required tolerances or specifications.
For special care and watchfulness to avoid errors in the repair and assembly of equipment.

Forproper use and care of a wide variety of tools, material, and equipment.
For disposition of surplus and scrap materials after each job and keeping areas where work isperformed clean and orderly to maintain an atmosphere conducive to good work practices and safety.

CONTACTS:

With Plant Operations, Maintenance, and Storeroom supervision and personnel.

WORKING CONDITIONS:

Full range of temperatures from very hot to sub-freezing. Sometimes sudden changes from one extremeto the other. Subject to noise, dusts, dirt, fumes, odors, drafts, and inclement weather.

Work attimes in cramped and artificial light is frequently necessary.

HAZARDS:

Subject to hazards existing from possible failure of nearby equipment; to danger from falling whileworking at elevations above grade, to burns from hot metal, piping or slag; to eye injury from arcflashes; or from any relaxation of the constant care to observe all required safety rules; and tothe usual hazards encountered in mechanical construction and maintenance work.
Occasionally exposed to noxious fumes in confined places.

QUALIFICATIONS:

Qualification standards as established in the Apprenticeship Program. In event no graduatingapprentice is available:
Must satisfy requirements as prescribed in the Supplementary Agreement on Uniform PracticesRegarding Promotion to Repairman (Certified) Jobs.
Must be accurate, steady and calm in emergencies; possess normal physical strength and endurance;and have no color deficiency in vision.
Must pass prescribed welder qualification tests in accordance with the requirements of Section IX of the ASME Boiler and Pressure Vessel Code.

Hourly Pay:

Grade Step OA 059 Step 1 of 1 (Top Step) - 54.56 USD

Position is eligible for annual incentive payments based on company performance and subject to sole management discretion. Visit our Benefits & PerksPage for more information on benefits provided to regular full-time employees.

If end date is listed, the posting will come down at 12:00 am on that date:

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, ethnicity, age, disability, genetic information, military service or status, pregnancy, marital status, sexual orientation, gender identity or expression, or any other class, trait, or status protected by law.

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Certified Repairman (Industrial Welder/Boilermaker/Pipefitter)
Certified Repairman (Industrial Welder/Boilermaker/Pipefitter)

Ameren Services Company • West Alton (MO)

Presencial
USD 105.000 - 115.000
Certified Repairman (Industrial Welder/Boilermaker/Pipefitter)
Certified Repairman (Industrial Welder/Boilermaker/Pipefitter)

Ameren Services Company • Labadie (MO)

Presencial
USD 63.000 - 87.000
Annual incentive
Certified Repairman (Industrial Welder/Boilermaker/Pipefitter)
Certified Repairman (Industrial Welder/Boilermaker/Pipefitter)

UEC Ameren Missouri • EE. UU.

Presencial
USD 60.201 - 85.741
Certified Repairman (Industrial Welder/Boilermaker/Pipefitter)
Certified Repairman (Industrial Welder/Boilermaker/Pipefitter)

Ameren • Missouri

Presencial
USD 60.201 - 85.741
Electrical Repairman (Industrial Electrician)
Electrical Repairman (Industrial Electrician)

Ameren • Missouri

Presencial
USD 57.837 - 82.374
Annual incentive payments
Comprehensive benefits
Electrical Repairman (Industrial Electrician)
Electrical Repairman (Industrial Electrician)

Ameren Services Company • West Alton (MO)

Presencial
USD 59.576 - 84.851
Annual incentive payments
Comprehensive benefits package
Laborer
Laborer

Ameren Services Company • West Alton (MO)

Presencial
USD 28.000 - 40.000
General Maintenance Mechanic
General Maintenance Mechanic

Ameren • Lake Ozark (MO)

Presencial
USD 73.000 - 78.000
General Maintenance Mechanic
General Maintenance Mechanic

Ameren Services Company • Lake Ozark (MO)

Presencial
USD 73.000 - 78.000
Annual incentive payments
PCM Certified Repairman
PCM Certified Repairman

Ameren Services Company • Maryland Heights (MO)

Presencial
Confidential