PCBA Assembler, 1st shift - IP

AMETEK; San Diego (CA); On-site; USD 40,000 - 55,000; Full time

Benefits offered by this job

Health insurance

401(k) with matching

Paid time off

Tuition reimbursement

Employee assistance program

Life insurance

Disability insurance

HSA with AMETEK contribution

FSAs

Job summary

AMETEK IntelliPower in San Diego, CA is seeking a PCBA Assembler to perform routine electronic and mechanical assembly at unit and module levels, using blueprints, work instructions, ECOs, drawings, and written processes to assemble and inspect components, subassemblies, and conformal coatings. This 1st shift position runs Monday–Friday 5:30 AM to 2:00 PM with overtime as needed.

3–5 years of related experience, a high school diploma or equivalent, IPC-610 or J-STD 001 certification, and strong

Qualifications

• 3–5 years of related assembly experience.
• High school diploma or equivalent.
• IPC-610 or J-STD 001 certification.
• Ability to read blueprints.
• Experience with SMT on PCB.
• Read and use measuring devices (rulers, tapes, scales).
• Able to communicate effectively.
• Basic computer skills.
• Authorized to work in the U.S. and access export-controlled information.

Responsibilities

• Observe safety regs and wear PPE.
• Assemble components to final configured product using docs and fixtures.
• Read drawings and parts lists; suggest process improvements.
• Perform rework from test failures per repair procedures.
• Apply coatings and cure/ bake procedures.
• Inspect boards under UV; rework coatings as needed.
• Verify quality at intervals and ensure accuracy of work.
• Provide training/support to lower-level assemblers.
• Operate equipment and read engineering docs.

Skills

Blueprint reading

SMT experience

Hand tools

Measuring devices

Communication

Basic computer skills

Education

High school diploma or equivalent

IPC-610 or J-STD 001 certification

Tools

Soldering irons

Torque wrench

Drills

Inspection tools

Job description

About Us Join our AMETEK IntelliPower team, where we design and deliver high-performance, ruggedized uninterruptible power systems (UPS) and frequency/voltage conversion solutions to safeguard mission-critical operations. Be a part of a team that ensures the reliability and protection of essential systems in the toughest environments, making a direct impact on critical industries worldwide!

About Us Join our AMETEK IntelliPower team, where we design and deliver high-performance, ruggedized uninterruptible power systems (UPS) and frequency/voltage conversion solutions to safeguard mission-critical operations. Be a part of a team that ensures the reliability and protection of essential systems in the toughest environments, making a direct impact on critical industries worldwide!

Job Summary The PCBA Assembler will prepare and perform routine electronic and mechanical assembly operations at unit and module assembly level using blueprints, work instructions, ECO’s, deviations, drawings, diagrams, and written processes. In addition, the Assembler will assemble and inspect components, parts, subassemblies, assemblies and conformal coating. The PCBA Assembler works on assignments that are semi-routine in nature but recognizes the need for occasional deviation from accepted practice and normally follows established procedures on routine work, requires instructions only on new assignments.

1st shift : Monday through Friday, 5:30 AM to 2:00 PM

Overtime: Ability to work overtime Monday through Friday and on weekends as needed/occasionally.

Key Responsibilities

• Observes all safety regulations including personal protective equipment.
• Assemble components to a final configured product utilizing process instructions, engineering documentation (assembly drawings, wire lists, etc.), specialized tooling and fixtures, measuring equipment, and hand tools.
• Reads and interprets assembly drawings, parts lists, operations sheets and visual aids. Make recommendations for changes to improve build processes.
• Perform any rework from test failures in accordance with standard repair procedures. May also incorporate ECN's into completed boards.
• Prep and insert electronic components onto circuit boards, hand solder components onto circuit boards, touch up and rework circuit boards.
• Apply coatings (acrylic, silicone, or urethane) using manual spray guns, brushes, or automated selective coating machines.
• Operate UV curing systems and thermal ovens following exact drying cycles.
• Inspect boards under UV light for voids, bubbles, or bridging. Manually touch up missed areas and rework defective coatings.
• Verify quality of product at the required intervals and verify accuracy of all work.
• May provide training and support to lower-level assemblers as required.
• Ability to operate material handling equipment, read and interpret engineering documentation, layout, and process worksheets, set-up and operate assigned machines and equipment.
• Meets established standards for productivity and quality.
• Follow the lead’s instructions on building units.

Minimum Qualifications

• Must require a minimum of 3 - 5 years of related experience. Assembler levels 1 - 5 will vary based on years of experience and scope of responsibility.
• High school diploma or equivalent.
• IPC-610 or J-STD 001 certification.
• Must be able to read blueprint.
• Must have experience in surface-mount technology (SMT) which is a method the electrical components are mounted directly onto the surface of a printed circuit board (PCB).
• Must possess good to excellent assembly blueprint reading experience/skills.Must be able to use hand tools (i.e. soldering irons, torque wrench, drills and inspection tools).
• Ability to properly read a variety of measuring devices including rulers, tape measures, and scales.
• Must be able to communicate effectively with others.
• Basic computer skills.
• Due to the nature of IntelliPower programs and products, applicants must have the legal right to work in the U.S. and additionally must be legally authorized to access export-controlled information and source code.

Desired Qualifications

• Efficient MS Word and Excel user

What’s In It For You

• Competitive compensation, holiday pay, and paid time off
• Great benefits package that includes health, vision, and dental insurance
• 401(k), plus matching
• Flexible spending accounts (FSAs), health savings account (HSA) with AMETEK contribution, life insurance, disability insurance, and family medical leave
• Employee referral program
• Tuition reimbursement program
• Employee assistance program
• Exciting, fast-paced environment where you could make a true impact
• Opportunities for career advancement within our business unit and across all other AMETEK business entities

Additional Details

Work Environment

• Production environment

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position requires the ability to lift 25 pounds.

Location Information

This role is based in San Diego, California, a city renowned for its idyllic blend of sun, sea, and vibrant culture. With a coastal climate and over 70 miles of stunning coastline, it's a haven for beach lovers and outdoor enthusiasts year-round. Explore diverse museums, the historic Gaslamp Quarter, and Balboa Park's gardens and world-famous zoo. Enjoy an active lifestyle with parks, trails, and water sports. Relish international cuisine and experience unique neighborhoods like lively North Park and coastal La Jolla. San Diego offers an irresistible mix of relaxation and adventure.

Salary Range

The annual pay range for this position generally ranges between $20.00 - $25.00. Actual salaries will vary and may be above or below the range based on various factors including but not limited to location, experience, and performance. In addition, AMETEK provides a variety of benefits to employees, including health insurance coverage, an employee assistance program, life and disability insurance, a retirement savings plan, paid holidays and paid time off.

Employee Type: Hourly

Currency: USD

Salary Minimum: 40,000

Salary Maximum: 55,000

Incentive: No

Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 [phone].