Painter/Powder Coater/Grinder/ Polisher, 2nd Shift

Central PA Chamber; Columbia (PA); On-site; USD 26,000 - 30,000; Full time

Job summary

Central PA Chamber is seeking a Painter/Powder Coater/Grinder/Polisher for 2nd shift in New Columbia, PA. The role covers grinding, polishing and prepping items for painting, along with painting and powder coating operations to meet production goals.

The candidate should have 1–2 years of related experience, be able to read blueprints, and be capable of handling manual labor tasks. Forklift certification may be required, and overtime could be needed to maintain deadlines.

Qualifications

• Must be able to read and interpret simple instructions and blueprints.
• Ability to perform basic math and measure with tapes and rules.
• Requires physical stamina for standing, lifting up to 50 pounds and repetitive tasks.

Responsibilities

• Grind, polish and prep parts for painting and powder coating.
• Operate wet spray equipment and apply finishes with attention to detail.
• Inspect finished parts for surface quality and paint adhesion.
• Read orders and mix paints as required to match specifications.
• Maintain and clean spray equipment and work area.
• Overtime may be required to meet production deadlines.

Skills

Blueprint reading

Basic math

Physical stamina

Computer skills

Tools

Forklift certification

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Painter/Powder Coater/Grinder/ Polisher, 2nd Shift

Regular Full Time Manual Labor New Columbia, PA, US

9 days ago Requisition ID: 1248

Salary Range: $19.00 To $22.00 Hourly

Summary: This position is responsible for all operations related to grinding, polishing and prepping items for the painting, and also being able to perform painting and powder coating operations by performing the following duties:

Essential Duties and Responsibilities include the following. Other duties may be assigned.

• Able to determine materials in need of grinding, selecting proper grinding tool and grit disk.
• Prepares and preps all parts (standard or special) with filler material to ensure a smooth finish and grinds piece to provide a quality surface for finishing.
• Cleans all parts and products in proper manner to ensure good paint adhesion.
• Review order quote, order entry document, general assembly and part details to determine proper color paint and mix special paints as required for each product.
• Operate wet spray equipment, siphon feed pressure pot and diaphragm pump.
• Able to apply standard product finishes ensuring complete coverage on all product.
• Able to review own work and proceeds to correct any defects before product moves to the next department.
• Cleans and repairs spray equipment to ensure it is operational and working properly.
• Able to perform both wet spray paint and powder coat painting applications
• Examines and feels surface of work piece for defects.
• Selects grade of abrasive belt, wheel, or disk according to specifications, knowledge of abrasives, and condition of metal, and attaches to grinder.
• Starts grinder and moves it over surface of work piece to remove scratches, laminated metal, excess weld material/burs.
• Polishes all weld seams to a seamless finish on flat surfaces, paying close attention to detail
• Finishes all corner weld seams to a smooth-rounded seems; no corners.
• Finishes all stainless steel oven/chamber parts (interior trays and control units) via finish grinder.
• Transfers various sized stainless steel chambers from welding to grinding or finishing area.
• Replaces worn abrasive disks, wheels, and belts.

Supervisory Responsibilities: This job has no direct supervisory responsibilities.

Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience: One to two years related experience and/or training; or equivalent combination of education and experience. Experience painting in the auto body industry is desirable.

Language Skills: A bility to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to other employees of the organization.

Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Able to accurately measure with a tape measure and square to 1/32" and convert decimals to fractions.

Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

Computer Skills: Basic knowledge of computers to log in, and navigate to access job folders to view documents to retrieve paint specifications may be necessary.

Certificates, Licenses, Registrations: Forklift certification may be required or a willingness to obtain one.

Other Qualifications: Ability to distinguish stainless steel, carbon steel and aluminum and read blue prints and schematics. Must be willing work overtime on an as-needed basis to maintain production deadlines. Able to wear and use a respirator is required for this job.

Physical Demands: T he physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stoop, kneel, crouch, climb (ladders),or crawl. The employee must frequently lift and /or move 5-25 pounds and occasionally lift and /or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate.