NDT Inspector J1-J4

Nassco; Norfolk (VA); On-site; USD 70,000 - 100,000; Full time

Job summary

General Dynamics NASSCO in Norfolk, VA is seeking an NDT Inspector J1–J4 to support QA inspections and testing within the ship repair setting. The role involves conducting UT, VT, MT, and PT inspections, reviewing drawings and NAVSEA standards, and preparing NDT reports under the QA program.

The candidate will pursue Level II NDT certification within required timeframes and participate in continuous improvement using basic Lean Six Sigma methods.

Qualifications

• Technical/Associate degree in QA/marine-related field.
• 4–6 years QA inspection experience.
• NDT Level II certification in VT/PT/MT/UT per NAVSEA.
• Ability to obtain Level II in UT shear wave within 6 months.
• Knowledge of ship construction, welding and inspection instruments.

Responsibilities

• Witness and document inspections and tests per plan.
• Ensure QA equipment calibration and certification.
• Review drawings, specs, NAVSEA standards and technical manuals.
• Prepare and submit NDT reports and CFRs.
• Provide Objective Quality Evidence (OQE) for DFS and corrective actions.
• Lead QA surveillance and non-conforming product control.

Skills

Blueprint reading

Quality inspection

Communication

Lean Six Sigma

Education

Technical/Associate Degree

Tools

MS Office

NDT instruments

Job description

Position Title: NDT Inspector J1–J4

General Dynamics NASSCO (General Dynamics Marine Systems) is a proud shipbuilder located in Norfolk, Virginia. This role is part of the Quality Assurance department. Hours are Monday-Friday 0600-1445.

Shift: ALL

Security Clearance: No Clearance

Essential Functions and Purpose

Performs predetermined methods, operations, setups, and prescribed specifications for QA inspections and tests required to substantiate conformance to drawings, specifications, and contract requirements. Conducts surveillance audits in all phases and stages during ship repair.

Position Demands – Education / Training

• Technical/Associate Degree, preferably QA/Marine‑related or equivalent.
• 4 to 6 years of Quality Assurance inspection experience or equivalent trade related.
• Certified as a Non‑Destructive Test Inspector Level II (includes VT, PT, MT, and UT) to NAVSEA TECHPUB requirements.
• If not certified, must be able to be certified if assigned these duties.
• Knowledge of ship construction and repair procedures including welding, structural, machinery, electrical piping, ventilation and familiarity with various measuring instruments related to inspections.

Position Demands – Required Experience

• Ability to perform essentials of the position, including working at heights, entering tanks, voids and cofferdams to perform competent person duties.
• Ability to climb vertical ladders, work around moving machinery and perform tasks while using a sky climber, scissor lift and/or condor.
• Read and understand blueprints, military standard/specifications, Regulatory Body Requirements, and Shipbuilding Specifications.
• Good general knowledge of ship repair procedures and test requirements.
• Skilled in blueprint reading, precision instrument utilization, and technical manual interpretation.
• Set, self‑calibrate and use assigned testing, inspection and QA instruments.
• Fundamental problem‑solving skills; use basic Lean and Six Sigma principles to recommend solutions.
• Computer literate with knowledge of NASSCO and mainframe computer.
• Good written and verbal communication skills.
• Exercise tact, diplomacy, decisiveness, resourcefulness, and good judgment in dealing with others.

OA Inspector NDT Journeyperson 4 (QA NDT Inspector)

• Must meet all Journeyperson QA NDT Inspector 3 requirements.
• Must be able to qualify as a Level II Non‑Destructive Testing Inspector in the UT shear wave within 6 months of assignment.
• Other NDT areas: VT, LPT, MT, and UT‑thickness readings.
• Proficient in reviewing and following NDT procedures, work specifications, drawings, technical manuals, and regulatory body requirements.
• Generate NDT reports documenting inspection results.
• Draft and submit required reports and Condition Found Reports (CFR) as required.
• Identify Departures from Specification (DFS) and provide Objective Quality Evidence (OQE) to draft and submit DFS for acceptance.
• Conduct Correction Action Request (CAR) surveillance for close‑out.
• Excellent verbal and written communication skills.
• Advanced computer skills with Microsoft Office Suite and basic Access Database and Project.
• Conduct NDT training to J1‑J3 NDT inspectors.
• Plan and manage a system for control of non‑conforming product and implement corrective and preventative action.
• Basic Lean and Six Sigma principles to provide recommended solutions.
• Perform quality system audits per contract, NAVSEA, and regulatory body requirements.
• Set‑up and close out jobs, including TIPs, filing for OQE records, checkpoint notifications, etc.

JOURNEYPERSON 3 (QA NDT INSPECTOR)

• Must meet all Journeyperson QA NDT Inspector 2 requirements.
• Qualify as Level II Non‑Destructive Testing Inspector in MT, UT thickness readings within 3 months of assignment and fully qualified as Level II VT and LPT NDT Inspector.
• Proficient in reviewing and following NDT procedures.
• Generate NDT reports documenting inspection results.
• Read and interpret T&I Plan, and attached applicable OQE.
• Knowledge of RCC, ESR, CFR or other work authorizing documents.
• Identify Departures from Specification (DFS) when required.
• Subject Matter Expert for conducting QA inspections.
• Write, submit, and answer Corrective/Preventative Action Request (CAR/PAR).
• Good computer skills and knowledge of MS Office.
• Exercise tact, diplomacy, decisiveness, resourcefulness, and good judgment in dealing with others.
• Conduct training to J1‑J2 ship repair inspectors.
• Basic knowledge of Quality System Audit requirements.
• Perform job within appropriate time frame without on‑site supervisor.
• Surveillance of shipboard production processes for safety, environmental, and work practice compliance.
• Identify defects and appropriate corrective actions.
• Knowledge of quality assurance principles and quality techniques.

JOURNEYPERSON 2 (QA NDT INSPECTOR)

• Meet all Journeyperson QA NDT Inspector Ship Repair 1 requirements.
• Qualify as Level II Non‑Destructive Testing Inspector in VT and LPT within 1 month.
• Review NDT procedures, work specifications, drawings, and technical manuals.
• Generate NDT reports.
• Maintain quality records to demonstrate conformance.
• Provide guidance and training to J1 inspectors.
• Knowledge of RCC, ESR, CFR, DFS.
• CAR/PAR knowledge.
• Determine quality of work performed by other trades.
• Good verbal and written communication skills.
• Ensure QA inspection equipment is calibrated and certified.
• Identify problems and discuss solutions.
• Perform job with minimal supervision.
• Identify questionable workmanship and seek guidance.
• Read and interpret blueprints and drawings.
• Report non‑conformances using the NCR process.
• Basic knowledge of Process Control Procedure/CWP requirements.
• Good problem‑solving skills.
• WAF trained.

JOURNEYPERSON 1 (QA NDT INSPECTOR)

• Entry Level Non‑Destructive Testing Trainee.
• Acquire NDT Level II VT inspector qualification within 3 months.
• Basic Microsoft applications knowledge.
• Research applicable NAVSEA Standard Items, OSHA standards, and regulations.
• Basic knowledge of Test and Inspection Plan.
• Good verbal and written communication skills.
• Assist with conducting in‑process inspections.
• Conduct in‑work process surveillances.
• Knowledge of ship repair procedures and various trades.
• Basic knowledge of quality assurance principles.
• Learn Process Control Procedure/CWP requirements.
• Work in all inspection locations (tanks, voids, cofferdams, elevated).
• Good housekeeping skills.
• Understand marine chemist certificate.
• Take care of tools and equipment.
• Know appropriate PPE.
• Identify safety hazards.
• Perform job safely.
• Navigate a ship and understand compartment designation.
• Knowledge of WAF Requirements.
• OSHA 10‑hour trained or willing to train.
• Rapid Gate access or eligible to obtain.
• Proficient in English reading, writing, speaking.

Physical Requirements

Must be able to perform tasks such as carrying, lifting, walking, climbing, pulling, and other physical activities necessary for the job. Must pass a Standard Test chart for near vision acuity reading J1 letters or equivalent and a color vision test using Ishihara’s Test.

Working Relationships

Reports to QA Supervisor or QA Manager. Maintains internal contact with Receiving, Safety and Production. External contact includes sub‑contractors and government or Navy personnel. Must be a team player.

Principal Responsibilities

• Witnesses or performs and documents (I), (V) and (G) point inspections and other tests at key points in the work process.
• Creates written records to document inspection results and provide supporting documentation to the Test and Inspection plan.
• Ensures all QA inspection equipment is calibrated and certified under the company’s calibration process/programs.
• Uses various measuring devices.
• Evaluates results from tests and inspections to determine acceptability.
• Has authority to accept, reject or rework defective or malfunctioning units per procedures; responsible for managing OQE documentation.
• Responsible for receipt inspections.
• Applies testing criteria per applicable specifications or standards and evaluates results.
• Conducts in‑process inspections to ensure correct materials, proper fabrication and installation procedures during production.
• Monitors and surveillances of shipboard production processes for compliance to standards.
• Researches standards and specification requirements to develop monitoring/surveillance plans.
• Organizes and reports test results.
• Performs specialized inspections.
• Reports work in‑process observations/surveillances/audits to provide an overview of adherence to work specifications and effectiveness of the Quality Management System.
• Performs non‑destructive testing and critical coating inspections as required by specifications, NAVSEA Standard Items, process control procedures or other technical documentation.
• Reviews work specification items, drawings, technical manuals, NAVSEA Standard Items or other contract documentation to ensure all testing and inspection requirements are identified or captured.
• Prepares and distributes weekly QA metrics.

General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other basis protected by local, state, or federal law.

Know Your Rights: Workplace Discrimination is Illegal

Call [phone]. This contact information is for accommodation requests only, not to inquire about the status of applications. NASSCO is an Equal Opportunity / Individuals with Disabilities / Protected Veterans Employer.

Nearest Major Market: Hampton Roads

Job Segment: Inspector, QA, Quality Control Inspector, Lean Six Sigma, Six Sigma, Quality, Management