MIG Welder

Mohawk Lifts; City of Amsterdam (NY); On-site; USD 42,000 - 57,000; Full time

Job summary

Mohawk Lifts is seeking a Welder for full-time work at our Amsterdam, NY facility. You will perform welding on various components using fixtures, adhere to safety rules, and support lean manufacturing initiatives while contributing to product development.

You will set jigs, read tape measures, and apply GMAW and FCAW welding processes. The role requires the ability to pass a welder qualification test (AWSD 1.1) and to work overtime as needed.

Qualifications

• High school diploma or GED.
• Welding vocational training or 1 year in a welding role in manufacturing.
• Proficiency in welding steel.
• Knowledge of GMAW and FCAW processes.
• Experience with pre-heat, weld fit up, weld inspection and weld finishing.
• Experience with overhead cranes and lifting methods.

Responsibilities

• Utilize welding processes to weld current and evolving fabricated products.
• Lift and carry work pieces manually or with hoist.
• Load parts into jigs and weld per work instructions.
• Collaborate with Welding Supervisor to develop processes and improvements.
• Maintain knowledge of welding processes including GMAW and FCAW.
• Read tape measure and use basic shop math.
• Perform pre-heat, weld fit up, weld preparation, inspection, and finishing.

Skills

Welding

GMAW

FCAW

Tape measure

Shop math

Quality focus

Teamwork

Education

High school diploma or GED

Tools

Welding machines

Overhead cranes

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Full time 7925 Amsterdam, NY, US

Salary Range: $20.00 To $27.50 Hourly

GENERAL STATEMENT OF DUTIES

A Welder is responsible for welding activities, including maintaining an efficient and clean work environment to weld products utilizing fixtures. The Welder follows safety requirements and effectively participates in team activities including product development and lean manufacturing programs. This position works under the direction of the Welding Leader or other manufacturing leaders. This position requires ability to set jigs and fixtures and follow work instructions to weld various component parts.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Utilize various welding processes to perform welding of current and evolving fabricated products.
• Lift and carry work pieces manually or with hoist.
• Load parts into jigs.
• Perform duties in assigned areas including welding booths, open areas and temporary work areas.
• Collaborate with Welding Supervisor to develop welding processes and recommend improvements where necessary.
• Maintain knowledge and perform various welding processes, including but not limited to: Gas metal arc welding and Flux cored arc welding.
• Perform pre-heat, weld fit-up, weld preparation, weld inspection, and weld finishing activities.
• Read tape measure and use basic shop math.
• Use oxy/acetylene torches or plasma cutters for heating and cutting steel materials.
• Actively participate in cross training and continuous improvement assignments.
• Maintain clean and organized work area conditions and comply with safety requirements.
• Perform work in a safe manner, complete all required safety inspections and adhere to safety rules and guidelines including safely operate all tools & equipment if trained and assigned.
• Produce a quality product in a timely manner.
• Must successfully pass a welder qualification test in accordance with AWSD 1.1.
• Fit up and weld some basic weldments without fixturing.
• Maintains conformance with safety rules and regulations, if you are unclear of or uncomfortable with a safety process then you have an obligation to make your supervisor aware.
• It is required that if you see or are made aware of a safety related issue or concern to immediately address it or make management aware.
• Involved with continuous improvement efforts regarding all aspects of safety.
• Must be able to wear required personal protective equipment.
• Work required overtime as needed.
• Other duties as assigned.

QUALIFICATIONS, KNOWLEDGE, and SKILLS

• High school diploma or general education degree (GED).
• Welding vocational training or a minimum of one (1) year of experience in a manufacturing environment in a welding role, including setting and adjusting weld settings based on material types and grades, desired weld bead size and quality, and degree of penetration.
• Proficiency in welding steel.
• Knowledgeable in welding processes including but not limited to: Gas metal arc welding and Flux cored arc welding.
• Demonstrated skills in pre-heat, weld fit up, weld preparation, weld inspection, and weld finishing.
• Experience with use of overhead cranes and lifting methods.
• Familiarity with the use and simple maintenance of welding machines.
• Ability to demonstrate high quality weldments through continual attention to detail and anticipate potential problems during the weld planning and design stages.
• Demonstrated ability to work cooperatively with management and co-workers.
• Must be detail oriented with attention to accuracy.
• Must understand English and be understood.
• Basic shop math.
• Must be able to work with minimum supervision.
• Demonstrated ability to handle multiple projects simultaneously.
• Must be able to work with various technologies.

CERTIFICATES, LICENCES, REGISTRATIONS

None.

SUPERVISORY RESPONSIBILITIES

None.

PHYSICAL DEMANDS

Must possess sight/hearing senses, or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, pushing, pulling, bending, grasping, reaching above shoulders and lifting up to 50 pounds. If work demands require lifting in excess of 50 pounds, the use of a mechanical device or initiation of a two-person lift is required.

WORK ENVIRONMENT

May be subject to changes in temperature and exposure to above normal noise levels, electrical equipment, dust levels, and chemicals. Normally acceptable manufacturing environment with no abnormal hazards or risks other than those listed herein.

TDD/TTY

email [e-mail]

AN EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion or religious practices, sex, veteran or military status, national origin or ancestry, age, physical or mental disability, creed, citizenship, marital status, sexual orientation, prior arrest or conviction record, genetic predisposition, political affiliation or belief, status as a domestic violence or stalking victim, beneficiary status of programs financially assisted under Title I of the WIA, or any other protected class under federal, state or local law. Mohawk Lifts LLC takes affirmative action in support of its policy to employ and advance in employment individuals who are protected veterans and individuals with disabilities.

GENERAL STATEMENT OF DUTIES

A Welder is responsible for welding activities, including maintaining an efficient and clean work environment to weld products utilizing fixtures. The Welder follows safety requirements and effectively participates in team activities including product development and lean manufacturing programs. This position works under the direction of the Welding Leader or other manufacturing leaders. This position requires ability to set jigs and fixtures and follow work instructions to weld various component parts.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Utilize various welding processes to perform welding of current and evolving fabricated products.
• Lift and carry work pieces manually or with hoist.
• Load parts into jigs.
• Perform duties in assigned areas including welding booths, open areas and temporary work areas.
• Collaborate with Welding Supervisor to develop welding processes and recommend improvements where necessary.
• Maintain knowledge and perform various welding processes, including but not limited to: Gas metal arc welding and Flux cored arc welding.
• Perform pre-heat, weld fit-up, weld preparation, weld inspection, and weld finishing activities.
• Read tape measure and use basic shop math.
• Use oxy/acetylene torches or plasma cutters for heating and cutting steel materials.
• Actively participate in cross training and continuous improvement assignments.
• Maintain clean and organized work area conditions and comply with safety requirements.
• Perform work in a safe manner, complete all required safety inspections and adhere to safety rules and guidelines including safely operate all tools & equipment if trained and assigned.
• Produce a quality product in a timely manner.
• Must successfully pass a welder qualification test in accordance with AWSD 1.1.
• Fit up and weld some basic weldments without fixturing.
• Maintains conformance with safety rules and regulations, if you are unclear of or uncomfortable with a safety process then you have an obligation to make your supervisor aware.
• It is required that if you see or are made aware of a safety related issue or concern to immediately address it or make management aware.
• Involved with continuous improvement efforts regarding all aspects of safety.
• Must be able to wear required personal protective equipment.
• Work required overtime as needed.
• Other duties as assigned.

QUALIFICATIONS, KNOWLEDGE, and SKILLS

• High school diploma or general education degree (GED).
• Welding vocational training or a minimum of one (1) year of experience in a manufacturing environment in a welding role, including setting and adjusting weld settings based on material types and grades, desired weld bead size and quality, and degree of penetration.
• Proficiency in welding steel.
• Knowledgeable in welding processes including but not limited to: Gas metal arc welding and Flux cored arc welding.
• Demonstrated skills in pre-heat, weld fit up, weld preparation, weld inspection, and weld finishing.
• Experience with use of overhead cranes and lifting methods.
• Familiarity with the use and simple maintenance of welding machines.
• Ability to demonstrate high quality weldments through continual attention to detail and anticipate potential problems during the weld planning and design stages.
• Demonstrated ability to work cooperatively with management and co-workers.
• Must be detail oriented with attention to accuracy.
• Must understand English and be understood.
• Basic shop math.
• Must be able to work with minimum supervision.
• Demonstrated ability to handle multiple projects simultaneously.
• Must be able to work with various technologies.

CERTIFICATES, LICENCES, REGISTRATIONS

None.

SUPERVISORY RESPONSIBILITIES

None.

PHYSICAL DEMANDS

Must possess sight/hearing senses, or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, pushing, pulling, bending, grasping, reaching above shoulders and lifting up to 50 pounds. If work demands require lifting in excess of 50 pounds, the use of a mechanical device or initiation of a two-person lift is required.

WORK ENVIRONMENT

May be subject to changes in temperature and exposure to above normal noise levels, electrical equipment, dust levels, and chemicals. Normally acceptable manufacturing environment with no abnormal hazards or risks other than those listed herein.

TDD/TTY

email [e-mail]

AN EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion or religious practices, sex, veteran or military status, national origin or ancestry, age, physical or mental disability, creed, citizenship, marital status, sexual orientation, prior arrest or conviction record, genetic predisposition, political affiliation or belief, status as a domestic violence or stalking victim, beneficiary status of programs financially assisted under Title I of the WIA, or any other protected class under federal, state or local law. Mohawk Lifts LLC takes affirmative action in support of its policy to employ and advance in employment individuals who are protected veterans and individuals with disabilities.

1st Shift: Monday - Friday, 6:00AM - 2:30PM
2nd Shift: Monday - Friday, 2:00PM - 10:30PM