MEMS Semiconductor & Assembly Process

Seek Thermal

Santa Barbara (CA)

On-site

USD 120,000 - 180,000

Full time

4 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Seek Thermal in Santa Barbara, CA seeks a MEMS Semiconductor and Assembly Process Engineer to own MEMS fabrication and packaging from wafer to die, collaborating with external suppliers.

This fab-less role covers front-end MEMS processes and back-end assembly, using DOE and SPC to improve yield, while working in cleanroom and non-cleanroom environments and traveling to suppliers.

Qualifications

  • BS in Electrical/Mechanical Engineering, Materials Science, Physics, or related field; MS preferred.
  • 5+ years hands-on process engineering in MEMS or semiconductor wafer fab, with at least 2 years covering assembly/packaging (wafer bonding, die attach, wire bond, or hermetic sealing).
  • Working knowledge of thin-film and etch processes and their interaction with downstream packaging.
  • Demonstrated use of DOE, SPC, and FMEA in a production environment.
  • Comfortable in a cleanroom (gowning required); able to read metrology and failure-analysis data and act on it.
  • Clear written and verbal communication with suppliers, vendors, operators, and cross-functional engineers.
  • Occasional travel to suppliers and contract manufacturers.
  • U.S. Person status as defined by ITAR (if required by product line).

Responsibilities

  • Own and sustain MEMS fabrication processes to yield targets and cost goals.
  • Develop and qualify assembly/packaging processes (wafer bonding, vacuum sealing, die attach, wire bonding).
  • Characterize interfaces and package hermeticity using microscopy and vacuum monitoring.
  • Design and run DOEs; use JMP/Python for yield analysis and corrective actions.
  • Manage outsourced steps with vendors: define specs, review data, run qualification lots.
  • Perform root-cause analysis and drive fixes through MRB/CCB.
  • Collaborate with design, test, reliability, quality, and other teams on NPI and DFx."

Skills

MEMS process eng
Semiconductor wafer fab
Assembly/packaging
DOE
SPC
FMEA
Clear communication with suppliers
Cleanroom experience

Education

Bachelor's degree in Electrical/Mechanical Engineering
MS preferred
Related field (Materials Science, Physics)

Tools

Python
LabVIEW
JMP

Job description

Description:SUMMARY

Under the direct supervision of the Wafer Management Director, the MEMS Semiconductor and Assembly Process Engineer is responsible for the MEMS sensor die from wafer fabrication through wafer-level packaged and tested die. This fab-less role involves working with multiple external suppliers and spans front-end MEMS processes (thin-film deposition, lithography, metallization, etch, and release) and back-end assembly (wafer-level hermetic vacuum sealing/bonding, wafer probing, dicing, die attach, and wire bonding). Working with suppliers, the engineer will sustain and improve yield on production processes, develop new processes and tools, and qualify them for production manufacturing. The position operates in both cleanroom and non-cleanroom manufacturing environments, supporting Production and Engineering.

RESPONSIBILITIES

Own and sustain MEMS fabrication processes (PECVD/sputter deposition, photolithography, DRIE and wet etch, sacrificial release) to yield, Cpk, and cost targets. Develop and qualify assembly and packaging processes: wafer-to-wafer bonding, getter activation and vacuum sealing, dicing, die attach, and wire bonding. Characterize bond interfaces and package hermeticity using SAM, IR microscopy, SEM/FIB cross-sections, and long-term vacuum-integrity monitoring. Design and run DOEs; use SPC and statistical analysis (JMP, Python) to identify drivers of yield loss and drive corrective and preventive actions. Manage outsourced process steps at external suppliers: define specifications, review vendor data, run qualification lots, and disposition non-conforming material. Perform root-cause failure analysis; drive containment and permanent fixes through the MRB/CCB process. Partner with device design, test, reliability, quality, and engineering functions on new-product introduction and design-for-manufacturability reviews.

Requirements

BS in Electrical/Mechanical Engineering, Materials Science, Physics, or related field; MS preferred. 5+ years of hands-on process engineering in MEMS or semiconductor wafer fab, with at least 2 years covering assembly/packaging (wafer bonding, die attach, wire bond, or hermetic sealing). Working knowledge of thin-film and etch processes and their interaction with downstream packaging (stress, outgassing, surface preparation for bonding). Demonstrated use of DOE, SPC, and FMEA in a production environment. Comfortable in a cleanroom (gowning required); able to read metrology and failure-analysis data and act on it. Clear written and verbal communication with suppliers, vendors, operators, and cross-functional engineers. Occasional travel to suppliers and contract manufacturers. U.S. Person status as defined by ITAR (if required by product line).

PREFERRED QUALIFICATIONS

Experience with microbolometers or other vacuum-packaged MEMS infrared sensors. Wafer-level packaging experience. Knowledge of and experience with anti-reflective coatings. Wafer defect identification and corrective action to improve yield. Familiarity with MEMS reliability test methods. Experience managing external foundry and supplier relationships. Python or LabVIEW scripting for data handling; ISO 9001 quality-system experience.

Compensation details

00 Yearly Salary

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

MEMS Semiconductor & Assembly Process
MEMS Semiconductor & Assembly Process

Seek Thermal, Inc • Goleta (CA)

On-site
USD 120,000 - 180,000
Sr. MEMS Engineer
Sr. MEMS Engineer

Matthews Marking Systems • Seattle (WA)

On-site
USD 70,000 - 105,000
MEMS Process Engineer — Wafer Bonding & Packaging
MEMS Process Engineer — Wafer Bonding & Packaging

Seek Thermal, Inc • Goleta (CA)

On-site
USD 120,000 - 180,000
MEMS Process Engineer: Assembly & Packaging Expert
MEMS Process Engineer: Assembly & Packaging Expert

Seek Thermal, Inc • Goleta (CA)

On-site
USD 105,000 - 145,000
MEMS Process Engineer
MEMS Process Engineer

Silicon Microstructures,Inc. • Milpitas (CA)

On-site
USD 85,000 - 110,000
MEMS Process & Packaging Engineer — Build Next‑Gen Sensors
MEMS Process & Packaging Engineer — Build Next‑Gen Sensors

Seek Thermal • Goleta (CA)

On-site
USD 120,000 - 180,000
Sr MEMS Engineer-M326I02
Sr MEMS Engineer-M326I02

Matthews International • Seattle (WA)

On-site
USD 70,000 - 105,000
Principal Intergration Engineer - MEMS
Principal Intergration Engineer - MEMS

Silicon Desert Staffing • Bloomington (IN)

On-site
USD 110,000 - 140,000
Health Insurance (Medical, Dental &amp
Retirement Plan (401k)
Life Insurance
+3
Sr MEMS Engineer-M326I02
Sr MEMS Engineer-M326I02

Matthews International • Seattle (WA)

On-site
USD 120,000 - 150,000
MEMS Semiconductor & Assembly Process Engineer
MEMS Semiconductor & Assembly Process Engineer

Seek Thermal • Goleta (CA)

On-site
USD 120,000 - 180,000