Mechanical Test Engineer

Salient Motion

Hawthorne (CA)

On-site

USD 110,000 - 130,000

Full time

18 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Equity
Medical benefits
Life Insurance
Flexible PTO

Job summary

Salient Motion in Hawthorne, CA, seeks a Mechanical Environment/Qualification Test Engineer to lead vibration, shock, thermal and altitude testing, and witness testing at partner sites worldwide.

You will design test fixtures, develop plans to DO-160G and MIL-STD-810H, and analyze data to drive root-cause/corrective actions with design engineering. Requires travel and ITAR compliance.

Qualifications

  • B.S. in Mechanical, Aerospace, or related engineering.
  • 2+ years of qualification or environmental test experience in aerospace/defense hardware.
  • Hands-on DO-160 and MIL-STD-810 test campaigns.
  • Proficiency with mechanical test instrumentation, load cells, accelerometers, and data acquisition.
  • Experience designing test fixtures and instrumentation setups.
  • Strong technical writing for test plans and reports.
  • U.S. Person status per ITAR and ability to travel internationally.

Responsibilities

  • Plan, write, and execute mechanical qualification and acceptance test procedures for actuators and LRUs.
  • Develop test plans and reports to DO-160G and MIL-STD-810H.
  • Design and build mechanical test fixtures, load setups, instrumentation, and data acquisition configurations.
  • Plan and execute load, life and durability, and environmental testing to validate cycle reliability.
  • Manage testing at outsourced labs and witness tests at customer and partner facilities, domestically and internationally.
  • Coordinate test schedules, witness points, and acceptance criteria with customers and labs.
  • Analyze test data, identify failure modes, and drive root-cause actions with design engineering.
  • Support development of an in-house qualification test lab.

Skills

Test instrumentation
Test plan writing
Data analysis
Test fixture design
Travel internationally

Education

B.S. in Mechanical/Aerospace

Tools

Test instruments (load cells, accelerometers)
Data acquisition systems

Job description

**Applicants must be U.S. Citizens or U.S. Permanent Residents (Green Card holders) to meet customer and regulatory requirements**

Who We Are

We are pioneering modular motion technologies to power the next generation of innovation for Industrial, Aerospace and Defense. If you're excited about disrupting legacy industries, and passionate about building the financial infrastructure behind cutting-edge hardware, let's chat!

We are at the forefront of innovation, crafting exclusive motion control components that propel the industrial, aerospace, and defense sectors into the future.

A couple other things:

  • We offer a lot of autonomy
  • We like to run lean for impact
  • We have great benefits
  • We are well funded, and already generating revenue
  • We are located in beautiful Hawthorne, CA and just moved into a new large hangar facility
What you'll do:

This role focuses on the mechanical and environmental side of qualification: vibration, shock, thermal, humidity, altitude, and life/durability testing, including the design of test fixtures and instrumentation. The role includes witnessing tests at customer and partner sites, both domestically and abroad.

  • Plan, write, and execute mechanical qualification and acceptance test procedures for actuators and integrated LRUs.
  • Develop test plans and reports to DO-160G and MIL-STD-810H, including vibration, shock, thermal, humidity, and altitude testing to support qualification as well as unit acceptance testing.
  • Design and build mechanical test fixtures, load setups, instrumentation, and data acquisition configurations.
  • Plan and execute load, life and durability, and environmental testing to validate cycle reliability requirements.
  • Manage testing at outsourced labs and witness tests at customer and partner facilities, domestically and internationally.
  • Coordinate test schedules, witness points, and acceptance criteria with customers and labs.
  • Analyze test data, identify mechanical failure modes, and drive root-cause/corrective action with design engineering.
  • Support development of an in-house qualification test lab as capability matures.
What you need:
  • B.S. in Mechanical, Aerospace, or related engineering discipline.
  • 2+ years of qualification or environmental test experience on aerospace, defense, or comparable hardware.
  • Hands-on experience executing DO-160 and/or MIL-STD-810 mechanical and environmental test campaigns.
  • Proficiency with mechanical test instrumentation, load cells, accelerometers, data acquisition systems, and data analysis.
  • Experience designing test fixtures and mechanical instrumentation setups.
  • Strong technical writing for test plans and reports.
  • U.S. Person status required per ITAR and ability to travel internationally (valid passport required).
Nice to have:
  • Experience with electromechanical actuators, motors, gear trains, or precision mechanisms.
  • Thermal, vibration and shock test familiarity (fixture design, modal considerations, test tailoring).
  • Exposure to commercial/defense certification environments.
  • Experience managing third-party test labs and witnessing customer acceptance testing.
What we have to offer:

We are not just building components. We are reshaping the future of the Aerospace and Defense component industry, which is a $300B+ market! Come join us and help build next generation systems that will make a massive impact at global scale.

  • Competitive compensation: $110,000 to $130,000 base salary + equity
  • Exceptional healthcare benefits — Medical is 100% covered by the company
  • Life Insurance (2x Salary) 100% covered by the company
  • Flexible PTO, 401K, Financial Wellness Resources, and more
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Mechanical Engineer
Senior Mechanical Engineer

Salient Motion • Hawthorne (CA)

On-site
USD 160,000 - 190,000
Competitive pay
Healthcare
Flexible PTO
+1
Principal Mechanical Engineer
Principal Mechanical Engineer

Salient Motion, Inc. • Torrance (CA)

On-site
USD 200,000 - 230,000
100% company-covered healthcare
Flexible PTO
401K
Mechanical Engineer
Mechanical Engineer

Salient Motion • Hawthorne (CA)

On-site
USD 90,000 - 150,000
Competitive compensation
Equity
Healthcare benefits
+2
Lead MechanicalTest Engineer
Lead MechanicalTest Engineer

Judit Inc. • Wilmington (MA)

On-site
USD 120,000 - 160,000
Mechanical Engineer Hardware
Mechanical Engineer Hardware

Frontdoor Defense • Hawthorne (CA)

On-site
USD 90,000 - 120,000
Competitive compensation + equity
Exceptional healthcare benefits, 100%
Flexible PTO
+2
Mechanical Engineer Hawthorne, CA
Mechanical Engineer Hawthorne, CA

Salient Motion, Inc. • Hawthorne (CA)

On-site
USD 90,000 - 120,000
Competitive compensation + equity
Full healthcare coverage
Flexible PTO
+1
Staff Hardware Test Engineer
Staff Hardware Test Engineer

Apera • San Francisco (CA)

On-site
USD 120,000 - 180,000
Mechanical Test Engineer
Mechanical Test Engineer

trueanomalyinc • Long Beach (CA)

On-site
USD 85,000 - 175,000
Equity
Health plan
PTO & Holidays
+2
Aerospace Mechanical Test Engineer (Qualification & Env)
Aerospace Mechanical Test Engineer (Qualification & Env)

Salient Motion • Hawthorne (CA)

On-site
USD 110,000 - 130,000
Equity
Medical benefits
Life Insurance
+1
Senior Development Engineer
Senior Development Engineer

Marotta Controls • Parsippany-Troy Hills (NJ)

On-site
USD 137,000 - 150,000
Quarterly bonus
Medical, prescription, dental, vision
Life and disability insurance
+5