Mechanical Engineer II

Hill Phoenix, Inc.

Jenks (OK)

On-site

USD 70,000 - 95,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Discretionary bonus

Job summary

TWG, based in Jenks, Oklahoma, seeks an engineer to design new products and sustain existing lines, focusing on winches, gear drives, and related systems. You will create 3D CAD models, BOMs, and ECOs, perform load and structural analyses, and validate designs through testing to ensure safety and reliability.

The role requires a Bachelor's in engineering with 3+ years of experience, travel as needed, and a commitment to ISO quality and environmental standards.

Qualifications

  • Bachelor's degree in engineering with 3+ years related experience.
  • Experience with mechanical systems design, analysis and testing.
  • Proficient in 3D CAD and BOM documentation.
  • Willingness to travel as required.

Responsibilities

  • Design mechanical, electromechanical, and hydraulic systems and components including winches, winch accessories, truck-mounted equipment, gearboxes, castings, fabrications, clutches, and brakes.
  • Create and modify 3D CAD models, detailed engineering drawings, and accurate Bills of Materials (BOMs). Review or approve drawings and Engineering Change Orders (ECOs) as authorized by engineering leadership.
  • Perform structural, mechanical, and load calculations to determine optimal shapes, material selection, and safety factors.
  • Direct and execute test procedures to validate new designs; analyze test data for performance and reliability.
  • Review product designs for compliance with engineering principles, company guidelines, standards, and customer requirements.
  • Support ISO quality management systems and environmental safety standards.
  • Perform other related duties and engineering projects as assigned.

Skills

Mechanical design
CAD modeling
Engineering analysis
Test engineering
Project management

Education

Bachelor's degree in engineering

Tools

3D CAD

Job description

"TWG" is the group name we use to refer to the industry's foremost producers of quality winches, hoists, gear drives and electronic monitoring systems for global industrial applications. The seven brands comprising TWG include Tulsa Winch, Rufnek, Greer, dp Winch, Gear Products, Pullmaster and LANTEC. Operating from the Jenks, Oklahoma facility are the Tulsa Winch, Rufnek, Greer, dp Winch and Gear Products brands with Pullmaster and LANTEC brands operating from the Surrey, British Columbia, Canada.

By drawing upon the talent of our dedicated employees and the strengths of these brands, TWG has become known around the world for providing innovative products and solutions designed and manufactured to high quality standards and delivered to our customers on time. The products and solutions produced by TWG find their way into diverse applications including onshore oil and gas, the utility industry, commercial and governmental towing and recovery, construction and offshore cranes, marine applications including fishing and cargo handling, forestry and mining applications and a myriad of other construction applications.

We feel that our success is directly attributable to the creativity, commitment and enthusiasm of our employees.

This position is responsible for designing new products, sustaining and enhancing existing product lines, and supporting continuous engineering improvements for TWG.

Essential Responsibilities
  • Product Design & Development: Design mechanical, electromechanical, and hydraulic systems and components-including winches, winch accessories, truck-mounted equipment, gearboxes, castings, fabrications, clutches, and brakes.
  • CAD & Documentation: Create and modify 3D CAD models, detailed engineering drawings, and accurate Bills of Materials (BOMs). Review or approve drawings and Engineering Change Orders (ECOs) as authorized by engineering leadership.
  • Engineering Analysis: Perform structural, mechanical, and load calculations (tension, compression, bending forces, horsepower, and operating stresses) to determine optimal geometric shapes, material selection, and machine safety factors.
  • Testing & Validation: Direct and execute test engineering procedures to validate new designs. Compile and analyze test data regarding temperature, pressure, speed, flow, and structural loads to confirm performance and reliability.
  • Compliance & Standards: Review product designs for strict compliance with engineering principles, company guidelines, industry standards, and customer requirements.
  • Quality & ISO Compliance: Exercise authority within established ISO management systems to identify quality issues, initiate root-cause corrective actions, halt non-conforming processing when necessary, and support environmental safety and pollution prevention standards.
  • Perform other related duties and engineering projects as assigned.
Qualifications/Requirements

Required:

  • Bachelor's degree in engineering with 3+ years related successful experience; or combination of education and experience.
  • Intermediate experience with Mechanical systems and elements, Design analysis of systems and components, 3-D CAD systems and drawings procedures, Integrating electronics and software with mechanical elements, Design of experiments.
  • Must be able to travel as required and /or directed.

Preferred:

  • Working knowledge of mobile equipment, cranes, winches, hoists, and geared machinery.
  • Hydraulics system design and project management experience.
  • Experience integrating electronics and software with mechanical elements
  • Design of experiments.
  • Familiarity with thermodynamics.

This position is eligible to earn a discretionary bonus based on performance metrics and other criteria outlined in our applicable bonus plan.

We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.

All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mechanical Engineer II
Mechanical Engineer II

Dover Corporation • Jenks (OK)

On-site
USD 70,000 - 90,000
Discretionary bonus
Mechanical Engineer II
Mechanical Engineer II

TWG • Jenks (OK)

On-site
USD 75,000 - 105,000
CNC Machinist - 1st Shift
CNC Machinist - 1st Shift

Hill Phoenix, Inc. • Jenks (OK)

On-site
USD 25,000 - 41,000
401(K) plan with employer contrib.
Medical, dental and vision insurance
Wellness programs
+1
Manufacturing Engineer
Manufacturing Engineer

Dover Corporation • Jenks (OK)

On-site
USD 65,000 - 90,000
401(k) Savings Plan
Medical, Dental & Vision Insurance
Wellness Programs
+6
CNC Machinist - 1st Shift
CNC Machinist - 1st Shift

TWG • Jenks (OK)

On-site
USD 42,000 - 62,000
401(k) plan
Medical, dental & vision insurance
Paid time off
+2
Service Technician II
Service Technician II

Hill Phoenix, Inc. • Jenks (OK)

On-site
USD 55,000 - 75,000
401(K) Savings Plan With Employer Con-
Medical, Dental And Vision Insurance
Wellness Programs
+6
Shipping - Receiving
Shipping - Receiving

TWG • Tulsa (OK)

On-site
USD 21,000 - 26,000
401(k) with employer contributions
Medical, dental and vision insurance
Wellness programs
+7
Painter
Painter

TWG • Jenks (OK)

On-site
USD 25,000 - 36,000
401(k) Contributions
Medical, Dental And Vision Insurance
Wellness Programs
+5
Assembler
Assembler

TWG • Jenks (OK)

On-site
USD 32,000 - 52,000
401K plan
Medical insurance
Paid time off
+1
Service Technician II
Service Technician II

Dover Corporation • Jenks (OK)

On-site
USD 42,000 - 66,000
401K Plan
Medical Insurance
Dental Insurance
+7