Manufacturing Labor & Equipment Operator

Rohner Finishing Systems,LLC; Vancouver (WA); On-site; USD 30,000 - 41,000; Full time

Job summary

Rohner Finishing Systems, LLC in Vancouver, WA is hiring for a Manufacturing Labor & Equipment Operator. The role covers setup, operation, and monitoring of forming equipment, assembly, and breakout tasks on a full-time basis.

The position pays $22.00 to $30.00 per hour with opportunities for overtime. Candidates should be able to read drawings, use measuring tools, and work safely in a manufacturing environment.

Qualifications

• High school diploma or equivalent preferred.
• Mechanical assembly, fabrication, or related experience preferred.
• Ability to read fabrication and assembly drawings and use measuring tools.

Responsibilities

• Set up, operate, and monitor panel-forming equipment and press brakes.
• Read work orders, drawings, and bend information to ensure correct parts.
• Inspect, install, and verify tooling as trained and authorized.
• Record production quantities, scrap, and machine issues accurately.
• Maintain clean, safe work area and assist with other duties as assigned.
• Break out laser-cut parts and ensure traceability on the shop floor.

Skills

Mechanical aptitude

Read fabrication prints

Read assembly drawings

Basic shop math

Use hand tools safely

Team player

Attention to detail

Education

High school diploma or equivalent

Tools

Tape measure

Calipers

Grinders

Riveters

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Manufacturing Labor & Equipment Operator

Full Time Manual Labor Vancouver, WA, US

9 days ago Requisition ID: 1049

Salary Range: $22.00 To $30.00 Hourly

Essential Duties and Responsibilities- Form Operator

• Set up, operate, and monitor panel-forming equipment and press brakes in accordance with training and approved procedures.
• Read work orders, flat-pattern and formed-part drawings, bend information, dimensions, material specifications, quantities, and revisions.
• Select, inspect, install, and verify appropriate tooling as trained and authorized.
• Use machine controls and basic calculations to enter or verify bend sequences, angles, dimensions, and corrections.
• Perform first-piece and in-process inspections using a tape measure, square, angle gauge, calipers, or other assigned measuring tools.
• Identify material orientation, grain/protective-film requirements, part hand, and correct bend direction before forming.
• Recognize forming defects, tooling issues, dimensional variation, and unsafe conditions; stop and elevate when required.
• Handle and stage sheet-metal blanks and finished parts to prevent injury, mix-ups, and product damage.
• Operate a forklift and other authorized material-handling equipment as needed.
• Record production quantities, scrap, rework, inspections, and machine issues accurately.
• Perform operator-level cleaning, inspection, and preventive maintenance as trained.
• Maintain organized tooling and a clean, safe work area; support other duties as assigned.

Essential Duties and Responsibilities-Mechanical Assembly

• Build fan assemblies, powder collector units, heater units, and related mechanical subassemblies to current drawings, bills of material, and work instructions.
• Read and interpret assembly prints, exploded views, dimensions, hardware callouts, and revision information.
• Measure, fit, align, fasten, seal, and adjust components to meet assembly and quality requirements.
• Use hand tools, drills, impact drivers, grinders, riveters, torque tools, and other basic power tools safely and correctly.
• Verify parts and hardware before assembly and report missing, incorrect, damaged, or nonconforming material.
• Perform in-process checks for alignment, fastener security, rotation/clearance, fit, appearance, and completeness.
• Follow specified torque, sealing, guarding, and equipment-identification requirements.
• Move and position components using carts, hoists, pallet jacks, or other approved lifting devices.
• Complete required production and quality documentation accurately.
• Maintain an orderly work area and protect completed equipment from damage.
• Coordinate with fabrication, electrical, quality, and production teammates to resolve assembly issues.
• Perform rework, testing support, packaging preparation, and other duties as assigned.

Essential Duties and Responsibilities-Breakout Technician

Break out laser-cut parts from sheet metal skeletons (remaining material after CNC cutting)

Ensure all parts are fully removed from the sheet, with nothing left behind in the skeleton

Sort and organize parts by job, part number, and production priority

Apply identification labels/stickers to each part to ensure traceability throughout the shop floor

Separate usable parts from scrap skeleton material

Remove and dispose of skeleton scrap in designated recycling or waste areas

Inspect parts during breakout for obvious defects (incomplete cuts, tip-ups, warping, etc.)

Stage completed parts for the forming department in an organized and efficient manner

Maintain a clean and safe work area around laser tables and breakout stations

Communicate issues with cut quality, missing parts, or labeling discrepancies to supervisors or QC

Follow all safety procedures when handling sharp edges and heavy materials

Safety, Quality, and Team Expectations

• Follow all company safety rules, lockout/tagout requirements, PPE requirements, and equipment-specific procedures applicable to assigned work.
• Stop work and promptly report injuries, hazards, near misses, defective equipment, and quality concerns.
• Produce work to current drawings, specifications, and quality standards; do not knowingly pass defects to the next operation.
• Communicate respectfully, support coworkers, accept coaching, and contribute to a team-oriented workplace.
• Follow company policies and perform work only within assigned training and authorization.

Work Environment and Physical Requirements

• Regularly stand and walk for extended periods in a manufacturing environment.
• Frequently bend, reach, push, pull, grip, and perform repetitive motions throughout the shift.
• Lift, carry, and position materials or components weighing up to 50 pounds repetitively, with assistance or lifting equipment when appropriate.
• Work around moving equipment, sharp sheet-metal edges, noise, dust, and varying temperatures while wearing required personal protective equipment (PPE).
• Maintain the visual acuity, manual dexterity, and coordination needed to perform accurate fabrication or assembly work.

Schedule and Attendance

• Maintain reliable, punctual attendance and report ready to work at the scheduled start time.
• Work overtime, alternate shifts, and flexible hours as production needs require.

Required Knowledge, Skills, and Qualifications

• High school diploma or equivalent preferred.
• Mechanical assembly, industrial equipment, HVAC, fabrication, automotive, or related experience preferred.
• Mechanical aptitude and the ability to understand how components fit and function together.
• Previous press-brake, panel-former, sheet-metal, or manufacturing experience preferred.
• Ability to read fabrication prints, forming drawings, bend callouts, and revision information.
• Ability to read assembly drawings and use a tape measure accurately.
• Basic shop math skills, including fractions and decimals.
• Ability to use common hand and power tools safely and efficiently.
• Strong attention to detail and commitment to quality workmanship.
• Dependable team player who communicates clearly and follows direction.

Essential Duties and Responsibilities- Form Operator

• Set up, operate, and monitor panel-forming equipment and press brakes in accordance with training and approved procedures.
• Read work orders, flat-pattern and formed-part drawings, bend information, dimensions, material specifications, quantities, and revisions.
• Select, inspect, install, and verify appropriate tooling as trained and authorized.
• Use machine controls and basic calculations to enter or verify bend sequences, angles, dimensions, and corrections.
• Perform first-piece and in-process inspections using a tape measure, square, angle gauge, calipers, or other assigned measuring tools.
• Identify material orientation, grain/protective-film requirements, part hand, and correct bend direction before forming.
• Recognize forming defects, tooling issues, dimensional variation, and unsafe conditions; stop and elevate when required.
• Handle and stage sheet-metal blanks and finished parts to prevent injury, mix-ups, and product damage.
• Operate a forklift and other authorized material-handling equipment as needed.
• Record production quantities, scrap, rework, inspections, and machine issues accurately.
• Perform operator-level cleaning, inspection, and preventive maintenance as trained.
• Maintain organized tooling and a clean, safe work area; support other duties as assigned.

Essential Duties and Responsibilities-Mechanical Assembly

• Build fan assemblies, powder collector units, heater units, and related mechanical subassemblies to current drawings, bills of material, and work instructions.
• Read and interpret assembly prints, exploded views, dimensions, hardware callouts, and revision information.
• Measure, fit, align, fasten, seal, and adjust components to meet assembly and quality requirements.
• Use hand tools, drills, impact drivers, grinders, riveters, torque tools, and other basic power tools safely and correctly.
• Verify parts and hardware before assembly and report missing, incorrect, damaged, or nonconforming material.
• Perform in-process checks for alignment, fastener security, rotation/clearance, fit, appearance, and completeness.
• Follow specified torque, sealing, guarding, and equipment-identification requirements.
• Move and position components using carts, hoists, pallet jacks, or other approved lifting devices.
• Complete required production and quality documentation accurately.
• Maintain an orderly work area and protect completed equipment from damage.
• Coordinate with fabrication, electrical, quality, and production teammates to resolve assembly issues.
• Perform rework, testing support, packaging preparation, and other duties as assigned.

Essential Duties and Responsibilities-Breakout Technician

Break out laser-cut parts from sheet metal skeletons (remaining material after CNC cutting)

Ensure all parts are fully removed from the sheet, with nothing left behind in the skeleton

Sort and organize parts by job, part number, and production priority

Apply identification labels/stickers to each part to ensure traceability throughout the shop floor

Separate usable parts from scrap skeleton material

Remove and dispose of skeleton scrap in designated recycling or waste areas

Inspect parts during breakout for obvious defects (incomplete cuts, tip-ups, warping, etc.)

Stage completed parts for the forming department in an organized and efficient manner

Maintain a clean and safe work area around laser tables and breakout stations

Communicate issues with cut quality, missing parts, or labeling discrepancies to supervisors or QC

Follow all safety procedures when handling sharp edges and heavy materials

Safety, Quality, and Team Expectations

• Follow all company safety rules, lockout/tagout requirements, PPE requirements, and equipment-specific procedures applicable to assigned work.
• Stop work and promptly report injuries, hazards, near misses, defective equipment, and quality concerns.
• Produce work to current drawings, specifications, and quality standards; do not knowingly pass defects to the next operation.
• Communicate respectfully, support coworkers, accept coaching, and contribute to a team-oriented workplace.
• Follow company policies and perform work only within assigned training and authorization.

Work Environment and Physical Requirements

• Regularly stand and walk for extended periods in a manufacturing environment.
• Frequently bend, reach, push, pull, grip, and perform repetitive motions throughout the shift.
• Lift, carry, and position materials or components weighing up to 50 pounds repetitively, with assistance or lifting equipment when appropriate.
• Work around moving equipment, sharp sheet-metal edges, noise, dust, and varying temperatures while wearing required personal protective equipment (PPE).
• Maintain the visual acuity, manual dexterity, and coordination needed to perform accurate fabrication or assembly work.

Schedule and Attendance

• Maintain reliable, punctual attendance and report ready to work at the scheduled start time.
• Work overtime, alternate shifts, and flexible hours as production needs require.

Required Knowledge, Skills, and Qualifications

• High school diploma or equivalent preferred.
• Mechanical assembly, industrial equipment, HVAC, fabrication, automotive, or related experience preferred.
• Mechanical aptitude and the ability to understand how components fit and function together.
• Previous press-brake, panel-former, sheet-metal, or manufacturing experience preferred.
• Ability to read fabrication prints, forming drawings, bend callouts, and revision information.
• Ability to read assembly drawings and use a tape measure accurately.
• Basic shop math skills, including fractions and decimals.
• Ability to use common hand and power tools safely and efficiently.
• Strong attention to detail and commitment to quality workmanship.
• Dependable team player who communicates clearly and follows direction.

Graveyard Shift - differential pay rate (2)
Day Shift - (4)