Manufacturing Engineer

Quest Global

Charlotte (NC)

On-site

USD 80,000 - 92,000

Full time

9 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

401(k)
401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Referral program
Vision insurance
Short/Long Term Disability

Job summary

Quest Global seeks an experienced manufacturing engineer to develop processes for gas turbine components in Charlotte, NC. You will influence design-to-fabrication through CNC programming, fixture design, and advanced heat-treatment methods while driving efficiency and quality.

A strong background in nickel alloys and CAD/CAM tools is essential. You will mentor operators and engineers, prepare work instructions, and pursue automation opportunities.

Qualifications

  • BS in Mechanical Engineering or equivalent experience.
  • 2+ years manufacturing experience in fabrication/machine shop.
  • Strong capability in forming and fabrication of nickel-based alloys.
  • Experience with CNC programming and laser drilling/machining centers preferred.
  • Experience in heat treatment vacuum furnace operations and maintenance.
  • Proficiency in CAD/CAM software, especially Siemens NX, fixture design, sheet metal forming, and robotic programming.
  • Experience in improving manufacturing processes, facilities, and production planning with tooling knowledge.
  • Ability to interpret complex drawings with GD&T and non-destructive testing basics.

Responsibilities

  • Develop and implement product-specific processes used to manufacture gas turbine combustion components.
  • Participate in and lead manufacturing and repair process development and improvement projects.
  • Collaborate with design and repair engineering on new product introduction and process development.
  • Ensure manufacturing processes are clearly defined and communicated to shop floor with instructions.
  • Provide technical guidance and training to operators, technicians and engineers on fixtures, tooling, and equipment.
  • Create work instructions and SOPs where required.
  • Identify areas for automation and support process improvement ideas.

Skills

Nickel alloys fabrication
CNC programming
Robot programming
Lean Six Sigma
GD&T
Fixture design

Education

BS in Mechanical Engineering or equivalent experience

Tools

Siemens NX
CAD/CAM software

Job description

Job Requirements

Quest Global delivers world-class end-to-end engineering solutions by leveraging our deep industry knowledge and digital expertise. By bringing together technologies and industries, alongside the contributions of diverse individuals and their areas of expertise, we are able to solve problems better, faster. This multi-dimensional approach enables us to solve the most critical and large-scale challenges across the aerospace & defense, automotive, energy, hi-tech, healthcare, medical devices, rail and semiconductor industries.

Job Requirements

Quest Global delivers world-class end-to-end engineering solutions by leveraging our deep industry knowledge and digital expertise. By bringing together technologies and industries, alongside the contributions of diverse individuals and their areas of expertise, we are able to solve problems better, faster. This multi-dimensional approach enables us to solve the most critical and large-scale challenges across the aerospace & defense, automotive, energy, hi-tech, healthcare, medical devices, rail and semiconductor industries.

We are looking for humble geniuses, who believe that engineering has the potential to make the impossible possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we’re eager to hear from you. The achievers and courageous challenge-crushers we seek, have the following characteristics and skills

What You Will Do
  • Develop and implement product specific processes used to manufacture complex gas turbine combustion components.
  • Participate in and lead manufacturing and repair process development and improvement projects on gas turbine combustion components.
  • Effectively work with design and repair engineering colleagues on new product introduction and process development and industrialization.
  • Ensure manufacturing processes are clearly defined and communicated from manufacturing engineering to the shop floor via technical instructions, project briefings, etc.
  • Provide technical guidance and training to operators, technicians, and manufacturing engineers on the use of fixtures, tooling, and equipment.
  • Create work instructions and SOPs where required
  • Identify areas of automation, identify and support process improvement ideas
What You Will Bring
  • BS in Mechanical Engineering or equivalent years of applicable experience is required
  • Min.2+ years of manufacturing experience in a fabrication and machine shop environment; overall 5+yrs in manufacturing shopfloor.
  • Strong technical skills in forming and fabrication (welding, brazing, …) of Nickel-based alloys.
  • Preferred candidate also will have experience with CNC programing and operation of laser drilling and/or machining centers.
  • Experience in heat treatment vacuum furnace operations and maintenance.
  • Proficient in CAD/CAM software, preferably Siemens NX, with experience in fixture design, sheet metal forming, and ideally robotic programming.
  • Experience in improving manufacturing processes, facilities, and production planning, along with knowledge of tooling and equipment selection.
  • Ability to interpret complex drawings and specifications, understanding GD&T, non-destructive and destructive testing techniques, and familiarity with Lean/Six Sigma philosophies.

Pay Range: $80k -$92K/annum

Compensation decisions are made based on factors including experience, skills, education, and other job-related factors, in accordance with our internal pay structure. We also offer a comprehensive benefits package, including health insurance, paid time off, and retirement plan.

Work Requirements: This role is considered an onsite position located in Charlotte, NC, USA

  • You must be able to commute to and from the location with your own transportation arrangements to meet the required working hours.
  • Shop floor environment, which may include but not limited to extensive walking, and ability to lift up to 40 lbs.

Travel Requirements: Due to the nature of the work, no travel is required.

Citizenship Requirement: Due to the nature of the work, U.S. citizenship / U.S. person / GC holder is required.

Benefits
  • 401(k)
  • 401(k) matching
  • Dental insurance
  • Health insurance
  • Life insurance
  • Paid time off
  • Referral program
  • Vision insurance
  • Short/Long Term Disability
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Engineer
Manufacturing Engineer

Quest Global • Winston-Salem (NC)

On-site
USD 60,000 - 70,000
Health insurance
401(k)
401(k) matching
+5
Manufacturing Engineer
Manufacturing Engineer

Quest Global • Fort Payne (AL)

On-site
USD 67,000 - 80,000
401(k)
401(k) matching
Dental insurance
+6
Manufacturing Engineer
Manufacturing Engineer

Quest Global • Foley (AL)

On-site
USD 70,000 - 73,000
401(k)
401(k) matching
Dental insurance
+5
Manufacturing Engineer
Manufacturing Engineer

Quest Global • Rockford (IL)

On-site
USD 39,000 - 45,000
Health insurance
Paid time off
401(k) matching
+2
Manufacturing Quality Engineer
Manufacturing Quality Engineer

Quest Global • Charlotte (NC)

On-site
USD 75,000 - 80,000
401(k) and 401(k) matching
Dental insurance
Health insurance
+4
Modelling and Manufacturing Engineer
Modelling and Manufacturing Engineer

Quest Global • Phoenix (AZ)

On-site
USD 58,000 - 66,000
401(k)
401(k) matching
Dental insurance
+5
Mechanical Design Engineer II--Job ID: 4183
Mechanical Design Engineer II--Job ID: 4183

RISINGSUN TECHNOLOGIES • Greenville (SC)

Hybrid
USD 53,000 - 76,000
Hybrid work model
W-2 employment
Manufacturing Technician
Manufacturing Technician

Blisk Dynamics • Long Beach (CA)

On-site
USD 50,000 - 80,000
100% company-paid medical, dental, and vision insurance
Flexible Time Off policy
401(k) plan with company matching
+1
Lead FEA Engineer
Lead FEA Engineer

Quest Global • Houston (TX)

On-site
USD 90,000 - 120,000
401(k)
401(k) matching
Dental insurance
+6
Manufacturing Engineer
Manufacturing Engineer

GE Aerospace • Texas

On-site
USD 92,000 - 110,000
Healthcare (medical, dental, vision)
401(k) with company match
Tuition assistance
+3