Maintenance Technician

Venteon; Tecumseh Township (MI); On-site; USD 55,000 - 75,000; Full time

Job summary

Venteon is seeking an Off Shift Maintenance Technician in Adrian, Michigan. The role requires hands-on maintenance, electrical/mechanical troubleshooting, and safety compliance within a manufacturing environment.

You will work on metal stamping presses, robotics, welding equipment, and automation systems, performing preventive maintenance and repairs as needed.

Qualifications

• Must be able to read blueprint drawings to guide maintenance tasks.
• Strong mechanical, hydraulic, and pneumatic knowledge.
• Experience with stamping presses, robotics, welding and automation systems.
• Ability to perform general maintenance and safety procedures.

Responsibilities

• Perform preventive and corrective maintenance on machinery and equipment.
• Troubleshoot breakdowns and implement remedial actions.
• Inspect machinery for defects and manage part replacements.
• Operate welding equipment and assist in welding setup.
• Maintain fluid levels and lubricants per PM program.
• Assist in setting up robotic welding stations and fixtures.
• Report abnormalities to Maintenance Supervisor and order parts as needed.
• Contribute to continuous improvements and safety initiatives.

Skills

Blueprint reading

Mechanical skills

Pipe fitting

Forklift operation

Communication skills

Education

High School Diploma or GED

Tools

Metal stamping presses

Robotics

Welding equipment

Automation equipment

Electrical diagnostics equipment

Job description

OFF SHIFT MAINTENANCE TECHNICIAN'S NEEDED - ADRIAN, MICHIGAN

A Leading Automotive Supplier in the Adrian, Michigan area needs Off Shift Maintenance Technician's. These are Full Time, Permanent, Direct Hire Positions offering Competitive Compensation, Bonus Potential, Good Benefits, Paid Holidays and Paid Vacation.

RESPONSIBILITIES:

• Work safely, following safety work instructions or designated safety procedures (such as Lock Out Tag Out).
• Ensure all assigned equipment is in good working condition.
• Troubleshoot machine breakdowns and carry out remedial actions.
• Inspect all machinery for defects and potential problems in accordance with preventative maintenance program; repair and replace parts as required.
• Perform general equipment maintenance duties as required e.g. cleaning, oiling and greasing machines according to the preventative maintenance program.
• Perform general equipment inspection and report abnormalities to Maintenance Supervisor.
• Perform basic mechanical and pipe fitting.
• Operate some welding equipment i.e., arc welding.
• Ensure fluid levels are maintained at appropriate levels in the machinery and equipment.
• Advise Maintenance Supervisor to order replacement parts as required.
• Build machine replacement parts as required.
• Perform general building equipment maintenance duties as required e.g. cleaning and greasing machines according to the preventative maintenance program.
• Perform general building maintenance duties. (eg. door hardware install/repair, repair small furniture assembly, repair small plumbing jobs, (e.g. light bulb replacement, etc.)
• Install small equipment.
• Make adjustments in welding program when required and participate in improving efficiency and cycle times.
• Set up robotic welding stations by operating/retrieving various computer programs stored in robotic welding equipment.
• Adjust equipment and change welding fixtures as necessary to ensure good quality welding
• Participate in Continuous Improvement and assist in its implementation on an ongoing basis.
• Modify existing equipment and install new equipment as required.
• Troubleshoot and diagnose electric/electronic system faults, tune equipment and ensure adequate controls and safety measures are functional.
• Carry out monthly and yearly electrical maintenance procedures, repairing/or replacing parts as required, in accordance the preventative maintenance program.
• Comply fully with Occupational Safety & Health Act guidelines.
• Contributes to a safe, clean and comfortable work environment that complements the Occupational Health and Safety Act by ensuring the principles of the 5-S discipline (simplify, separate, sanitize, standardize and support) are supported and adhered to.

EDUCATION & EXPERIENCE:

• Minimum 5 years experience in maintenance repair
• Ability to read blueprint drawings
• Experience with Metal Stamping presses up to 1,500 tons, automation, robotics, welders etc.
• Strong knowledge of electrical functioning, hydraulic and pneumatic machinery and automation equipment
• Ability to operate all maintenance equipment

SKILLS (LANGUAGE, TECHNICAL, COMPUTER ETC.)

• Good communication skills both written and verbal
• Basic mechanical skills
• Pipe fitting skills
• Forklift driving ability
• High School Diploma or GED