Maintenance Mechanic (MM) - Afternoon Shift

RXinsider LTD.; Rochester (MI); On-site; USD 60,000 - 85,000; Full time

Benefits offered by this job

Sign-on/Retention bonus

Job summary

RXinsider LTD. is seeking an Instrument Technician Specialist to perform calibration, installation, maintenance, and troubleshooting on industrial control systems.

Reporting to the Instrumentation Supervisor, the role involves working with pneumatic and electronic instrumentation, creating drawings in AutoCAD/Visio, and interfacing with customers for repair and calibration needs. The candidate will design, install and evaluate new process control systems, maintain meticulous documentation, and

Qualifications

• Must have completed a certified apprenticeship program in an instrumentation and controls trade, or have an AA degree or higher in a controls related field, or have several years’ experience as journey level instrumentation and controls technician or other technical program and a minimum of six years commercial or military experience in the field of metrology or instrumentation.
• Must have an in-depth knowledge of electronic, pneumatic, mechanical and hydraulic instruments and controls.
• Knowledgeable of ISO/IEC 17025 and ANSI/NCSL Z-540-1 requirements
• In-depth knowledge of PLC programming and PID control loop tuning/optimization.
• Be fully conversant with the use, design and development of a wide variety of integrated control systems and instruments.
• Must be able to work from prints, sketches and or verbal instructions.
• Must be able to handle all problems that arise on shift independently and in a timely manner.
• Intermediate knowledge of metrology practices and theories in a particular discipline(s): electronics, mechanics, dimensional analysis, chemistry, thermometry, acoustics and vibration,
• Ability to identify hazards associated with work and to develop methods to mitigate those hazards.
• Ability to develop work plans and to document all work.
• Must be a team player with excellent communication skills and have an emphasis on quality service.

Responsibilities

• Install, inspect, troubleshoot, repair, calibrate, maintain and commission instrumentation and controls for GMP and non-GMP facilities.
• Interpret and use pneumatic and electrical instruments to measure temperature, pressure, pH, flow, power, and other signals.
• Create and update instrumentation drawings using AutoCAD and Visio.
• Configure PLCs (Allen Bradley SLC5/05, ControlLogix, Honeywell S9000) and loop controllers.
• Design and evaluate new process control systems and equipment.
• Interface with customers for repair or calibration needs.
• Maintain documentation with high accuracy and low error rates.
• Document work in CMMS system and order parts as needed.
• Work may occur in GMP/non-GMP areas in clean room attire.
• Develop calibration procedures under supervision to meet customer needs and ensure traceability.
• May rotate shifts and work overtime as needed.

Skills

Journeyman instrumentation

PLC programming

Calibration procedures

Documentation

Education

Apprenticeship in instrumentation and controls

AA degree or higher in controls related field

Tools

AutoCAD

Visio

PLC hardware knowledge

Job description

Why Us?

We want the best and brightest people to help us achieve our mission to develop and deliver life-enhancing products through focused execution. Our nearly 3,000 global team members understand the important role we play in delivering healthcare and are dedicated to supporting each other as we work to bring the best treatments forward. Our shared values of Integrity & Quality, Innovation, Drive, Collaboration and Empathy guide our team and enable us to deliver upon our vision of helping everyone we serve live their best life.

Job Description Summary

Uses skills and abilities to install, inspect, assemble, troubleshoot, repair, adjust, calibrate, constructs, and maintain equipment, parts, and facilities. Documents activities. **This role requires a Machinist Journeyman's Card or Equivalent Military Training Experience** *Sign-on & Retention Award of $5,000*

Description

Job Description

The Instrumentation Department is seeking an Instrument Technician Specialist to perform designated calibration, installation, maintenance, and troubleshooting on industrial pneumatic and electronic distributed instrumentation, and control systems. Reporting to the Instrumentation Supervisor, the technician will perform the following duties.

Specific responsibilities include (but are not limited to):

• Adhere to all company policies and SOP’s.
• Respond to a wide range of Service Desk request to install, troubleshoot, repair, calibrate, maintain and commission the instrumentation and controls for GMP and non-GMP plant/laboratory facilities.
• Utilize equipment such as pneumatic and electrical instruments for measuring temperature, pressure, pH, flow, power, and other analytical signals.
• Maintains and creates instrumentation and control drawings using AutoCAD and Visio.
• Configure and troubleshoot PLC's (Allen Bradley SLC5/05, ControlLogix, and Honeywell S9000 PLCs), loop controllers, and relay logic.
• Design, install and evaluate new process control systems and associated equipment.
• Interface with customers for items requiring repair or limited calibration.
• Perform scheduled and unscheduled maintenance.
• Complete all documentation associated with position accurately and efficiently while maintaining a 5 % or less error discrepancy rates.
• Document work on CMMS system.
• Specify and order parts.
• Perform some work in GMP and/or non-GMP areas while in clean room attire.
• Develop calibration procedures, with supervision, to meet the needs of the customer while supporting traceability of the measurements.
• May work rotating shifts and overtime as operational needs dictate.

Qualifications:

• Must have completed a certified apprenticeship program in an instrumentation and controls trade, or have an AA degree or higher in a controls related field, or have several years’ experience as journey level instrumentation and controls technician or other technical program and a minimum of six years commercial or military experience in the field of metrology or instrumentation.
• Must have an in-depth knowledge of electronic, pneumatic, mechanical and hydraulic instruments and controls.
• Knowledgeable of ISO/IEC 17025 and ANSI/NCSL Z-540-1 requirements
• In-depth knowledge of PLC programming and PID control loop tuning/optimization.
• Be fully conversant with the use, design and development of a wide variety of integrated control systems and instruments.
• Must be able to work from prints, sketches and or verbal instructions.
• Must be able to handle all problems that arise on shift independently and in a timely manner.
• Intermediate knowledge of metrology practices and theories in a particular discipline(s): electronics, mechanics, dimensional analysis, chemistry, thermometry, acoustics and vibration,
• Ability to identify hazards associated with work and to develop methods to mitigate those hazards.
• Ability to develop work plans and to document all work.
• Must be a team player with excellent communication skills and have an emphasis on quality service.

EEO Statement

We firmly believe in the principles of equal employment opportunity and strive to create an atmosphere where all employees, regardless of their race, color, creed, religion, sex, gender identity or expression, sexual orientation, national origin, genetics, disability (including pregnancy), age, or military or veteran status, feel valued, respected, and empowered. Our commitment to EEO extends to every aspect of employment, including recruitment, hiring, training, promotions, compensation, benefits, transfers, terminations, and all other employment practices. We are dedicated to ensuring that all employment decisions are based on qualifications, skills, and merit.