MACHINE OPERATOR II

Century Arms, Inc.

Georgia (VT)

Presencial

USD 21.000 - 27.000

Jornada completa

hace 18 horas
Sé de los primeros/as/es en solicitar esta vacante

Una candidatura completa en un minuto

Currículum y carta de presentación personalizados, listos para enviar.

Supera los filtros ATS

Descripción de la vacante

Century Arms, Inc. is seeking a Machine Operator II for our Fairfax, VT facility. You will operate CNC mills and lathes, read drawings to verify part dimensions, and perform routine maintenance to ensure smooth production flow.

You will also inspect work with go/no-go gauges, track parts in the ERP system, and uphold firearm safety and 5S principles. This is a full-time on-site role with a focus on quality and efficiency.

Formación

  • Experience operating CNC mills and lathes.
  • Ability to read and interpret drawings to verify features.
  • Familiarity with go/no-go gauges and precision instruments.
  • Capable of basic routine maintenance on equipment.
  • Maintain safety and adhere to 5S practices.

Responsabilidades

  • Operate CNC mills and lathes.
  • Warm up and shut down machines daily.
  • Load and unload fixtures; inspect tooling.
  • Read blueprints to verify critical dimensions.
  • Use go/no-go gauges to inspect own work.
  • Maintain ERP-tracking of production pieces.
  • Follow safety rules and 5S at the workstation.

Conocimientos

CNC milling
CNC turning
Reading blueprints
Quality inspection
Tool setup

Herramientas

Go/No-Go gauges
Precision measuring tools

Descripción del empleo

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

MACHINE OPERATOR II

Manufacturing Full Time Manual Labor Fairfax, VT, US

2 days ago Requisition ID: 1333

Salary Range: $21.00 To $27.00 Annually

Summary of Position

Responsible for operation of CNC mills and lathes.

Responsibilities

  • Responsible for daily warm up and shut down of machine.
  • Use jog control and MPG (Manual Pulse Generator).
  • Responsible to inspect, replace, and set tooling.
  • Read and interpret drawings to determine dimensions of critical features to confirm accurate finished work pieces.
  • Load and unload fixtures.
  • Perform basic routine maintenance functions on equipment.
  • Perform inspection of own work using go and no-go gauge to ensure few or no mistakes are made in the assembly of the product.
  • Communicate with supervisor, engineers, production control, quality, and other manufacturing personnel for assignments and to resolve quality issues.
  • Produces the required quantity of parts and/or product to meet established daily goals.
  • Utilize company ERP system to track product through the production line.
  • Maintain sound working knowledge and application of firearm safety.
  • Complete all required paperwork timely and accurately.
  • Adhere to all employment policies/safety policies/practices required by law/established by Company.
  • Wear all necessary Personal Protective Equipment as always directed by Company.
  • Immediately report any maintenance and/or safety issues to supervisor.
  • Demonstrate a positive attitude towards co-workers, other departments, and the Company.
  • Maintain respect, courtesy and professionalism towards all co-workers and the Company.
  • Actively participate and support the 5S process by maintaining a clean workstation and department.
  • Other duties assigned as required.

Qualifications & Knowledge Required

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Ability to use precision measuring instruments, including but not limited to, calipers, ID and OD micrometers, depth gauges, indicators, and scales (preferred)
  • Ability to use tool holders, cutting tools, boring bars, fixtures, inserts, and other accessories used on various CNC machines(preferred)
  • Prior CNC operator experience preferred.
  • General mechanical ability is preferred.
  • Knowledge of and experience with hand tools
  • Adhere to essential functions of position such as attendance and timeliness.
  • Ability to accept and follow directions.

Working Conditions

Work is normally performed throughout a heated manufacturing and warehouse facility. Exposure to conditions of extreme heat/cold, poor ventilation, fumes and gases is very limited. Noise level is moderate and includes sounds of light manufacturing, shipping and receiving, and normal office equipment (computers, telephones, etc.). No known environmental hazards are encountered in normal performance of job duties.

Physical Demands

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions:

  • Ability to lift objects up to 50 lbs. and ask for assistance if necessary.
  • Ability to lift, push and pull objects as necessary.
  • Ability to stand and walk throughout the workday.
  • Occasionally required to bend, stoop, kneel, and crouch.
Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

MACHINE OPERATOR II
MACHINE OPERATOR II

Century Arms, Inc. • Vermont

Presencial
USD 21.000 - 27.000
MACHINE OPERATOR I
MACHINE OPERATOR I

Century Arms, Inc. • Vermont

Híbrido
USD 29.000 - 32.000
MACHINE OPERATOR I
MACHINE OPERATOR I

Century Arms, Inc. • Fairfax (VT)

Presencial
USD 29.000 - 37.000
CNC Machining Operator I — Precision Manufacturing
CNC Machining Operator I — Precision Manufacturing

Century Arms, Inc. • Vermont

Híbrido
USD 29.000 - 32.000
2nd Manufacturing Supervisor
2nd Manufacturing Supervisor

Century Arms, Inc. • Town of Vermont (WI)

Presencial
USD 30.000 - 38.000
2nd Manufacturing Supervisor
2nd Manufacturing Supervisor

Century Arms, Inc. • Fairfax (VT)

Presencial
USD 41.000 - 52.000
MACHINE OPERATOR II
MACHINE OPERATOR II

Century Arms • Fairfax (VT)

Presencial
USD 30.000 - 39.000
CNC Machine Operator 1st and 2nd
CNC Machine Operator 1st and 2nd

Momentum Manufacturing Group, LLC • Lyndon (VT), St. Johnsbury (VT)

Presencial
USD 24.796 - 52.803
MACHINE OPERATOR-2nd Shift
MACHINE OPERATOR-2nd Shift

Century Arms • Fairfax (VT)

Presencial
USD 48.000 - 60.000
CNC Mill/Lathe Operator
CNC Mill/Lathe Operator

Challenge Tool & Mfg • New Haven (IN)

Presencial
USD 21.000 - 28.000