Laser Operator - Immediate Opening

JM Fabrication Company, LLC

Arlington (TX)

Sur place

USD 30 000 - 41 000

Plein temps

Il y a 17 heures
Soyez parmi les premiers à postuler

Une candidature complète en une minute

Un CV et une lettre de motivation personnalisés, prêts à envoyer.

Passez les filtres ATS

Avantages offerts par ce poste

Health insurance
401k plan
Paid time off
Sick time
Holidays

Résumé du poste

JM Fabrication is seeking a Laser Operator to set up and run our CNC laser cutting equipment in Arlington, Texas. The operator will ensure parts are cut to print, keep the machine running, and move jobs to the next department on schedule, maintaining quality and throughput.

Requirements include 2+ years of CNC laser experience, ability to read blueprints, and proficiency with calipers and micrometers. You must lift up to 50 lbs and be able to stand for long periods; overtime may be required.

Qualifications

  • High school diploma or equivalent.
  • 2+ years of experience operating a CNC laser cutting machine in a sheet metal or fabrication shop.
  • Ability to read and interpret technical drawings and blueprints.
  • Proficient with measuring tools (calipers, micrometers, tape measure).
  • Basic shop math and understanding of tolerances.
  • Strong attention to detail and mechanical aptitude.
  • Ability to lift up to 50 lbs and stand for extended periods.
  • Reliable attendance and ability to work overtime when the schedule requires.
  • Must be a U.S. Person as defined by ITAR, 22 CFR 120.62 (U.S. citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3)).

Responsabilités

  • Set up and operate CNC laser cutting equipment to cut sheet metal and plate (aluminum, stainless steel, carbon steel and other alloys) to print.
  • Load programs and nests, verify material type, thickness and grain direction against the work order, and adjust cutting parameters for cut quality.
  • Read and interpret blueprints, engineering drawings and work orders.
  • Load and unload sheets and remove, sort and identify cut parts; keep parts and material traceable to the job.
  • Inspect first article and in-process parts for dimensions, edge quality and defects using calipers, micrometers and other measuring tools.
  • Record job time, quantities and nonconformances accurately in the shop ERP system.
  • Perform routine operator maintenance (lens, nozzle and slat care, cleaning) and report machine problems promptly.
  • Deburr and prepare parts for the next operation as needed.
  • Work with the production manager, planning and quality to resolve issues and meet delivery dates.
  • Keep a clean, safe and organized work area and follow all safety procedures.

Connaissances

CNC laser operating
Blueprint reading
Measuring tools
Attention to detail
Overtime readiness

Formation

High school diploma

Outils

Calipers
Micrometers
Tape measure

Description du poste

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Laser Operator - Immediate Opening

Full Time Arlington, TX, US

Salary Range: $22.00 To $30.00 Hourly

Job Title: Laser Operator

Location: JM Fabrication Company – Arlington, Texas
Job Type: Full-Time
Start: Immediate opening – we are interviewing now

Job Summary:

JM Fabrication is an AS9100 aerospace and defense sheet metal fabricator. We have an immediate opening for a Laser Operator to set up and run our CNC laser cutting equipment. Laser is the first operation on most of our jobs, so the parts you cut feed forming, machining, welding and assembly. We need someone who cuts accurate parts, keeps the machine running, and keeps jobs moving to the next department on schedule.

Key Responsibilities:

  • Set up and operate CNC laser cutting equipment to cut sheet metal and plate (aluminum, stainless steel, carbon steel and other alloys) to print.
  • Load programs and nests, verify material type, thickness and grain direction against the work order, and adjust cutting parameters for cut quality.
  • Read and interpret blueprints, engineering drawings and work orders.
  • Load and unload sheets and remove, sort and identify cut parts; keep parts and material traceable to the job.
  • Inspect first article and in-process parts for dimensions, edge quality and defects using calipers, micrometers and other measuring tools.
  • Record job time, quantities and nonconformances accurately in the shop ERP system.
  • Perform routine operator maintenance (lens, nozzle and slat care, cleaning) and report machine problems promptly.
  • Deburr and prepare parts for the next operation as needed.
  • Work with the production manager, planning and quality to resolve issues and meet delivery dates.
  • Keep a clean, safe and organized work area and follow all safety procedures.

Qualifications:

  • High school diploma or equivalent.
  • 2+ years of experience operating a CNC laser cutting machine in a sheet metal or fabrication shop.
  • Ability to read and interpret technical drawings and blueprints.
  • Proficient with measuring tools (calipers, micrometers, tape measure).
  • Basic shop math and understanding of tolerances.
  • Strong attention to detail and mechanical aptitude.
  • Ability to lift up to 50 lbs and stand for extended periods.
  • Reliable attendance and ability to work overtime when the schedule requires.
  • Must be a U.S. Person as defined by ITAR, 22 CFR 120.62 (U.S. citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3)).

Preferred Qualifications:

  • Experience with fiber or CO2 laser systems (e.g., Trumpf, Amada, Mazak, Bystronic).
  • Experience with nesting or laser programming software.
  • Experience in an AS9100 / aerospace or defense manufacturing environment.
  • Press brake or other sheet metal fabrication experience.

Compensation and Benefits:

  • Competitive hourly wage based on experience.
  • PTO, Sick Time, Holidays, company sponsored health insurance, 401k plan, and other benefits.
Obtenez votre examen gratuit et confidentiel de votre CV.

ou faites glisser et déposez votre fichier ici.

Similar jobs

Postes similaires à comparer

Laser Operator - Immediate Opening
Laser Operator - Immediate Opening

JM Fabrication • Arlington (TX)

Sur place
USD 30 000 - 41 000
PTO
Sick Time
Holidays
+2
CNC Laser Operator – Aerospace Sheet Metal (Full-Time)
CNC Laser Operator – Aerospace Sheet Metal (Full-Time)

JM Fabrication • Arlington (TX)

Sur place
USD 30 000 - 41 000
PTO
Sick Time
Holidays
+2
CNC Laser Operator - Aerospace Fabrication | Up to $30/hr
CNC Laser Operator - Aerospace Fabrication | Up to $30/hr

JM Fabrication Company, LLC • Arlington (TX)

Sur place
USD 30 000 - 41 000
Health insurance
401k plan
Paid time off
+2
Weekend 1st Shift - CNC Laser Operators Needed
Weekend 1st Shift - CNC Laser Operators Needed

Anchor Fabrication Fort Worth • Fort Worth (TX)

Sur place
USD 20 000 - 28 000
Laser Technician
Laser Technician

Primary Staffing Inc. • Itasca (IL)

Sur place
USD 25 000 - 33 000
2nd shift Laser Operators Needed
2nd shift Laser Operators Needed

Anchor Fabrication Fort Worth • Fort Worth (TX)

Sur place
USD 37 000 - 41 000
CNC Fiber Laser Operator - Dallas , TX
CNC Fiber Laser Operator - Dallas , TX

Mestek, Inc. • Dallas (TX)

Sur place
USD 28 000 - 41 000
CNC Operator
CNC Operator

JM Fabrication • Arlington (TX)

Sur place
USD 28 000 - 32 000
Laser Tech
Laser Tech

Masterack • Social Circle (GA)

Sur place
USD 25 000 - 39 000
Dental Insurance
Vision Insurance
Paid Vacation
+8
Weekend CNC Laser Operator
Weekend CNC Laser Operator

Randstad • Fort Worth (TX)

Sur place
USD 37 000 - 40 000