Integration Engineer Swarm Systems

APIUM Swarm Robotics - A Red Cat Company

San Diego (CA)

Presencial

USD 90 000 - 141 000

Tempo integral

há 16 horas
Torna-te num dos primeiros candidatos

Uma candidatura completa num minuto

Currículo e carta de apresentação personalizados, prontos a enviar.

Ultrapassa os filtros ATS

Resumo da oferta

Apium Swarm Robotics in San Diego seeks an Integration Engineer to join our on-site team building, configuring, testing, and validating small UAS and swarm software releases.

You will work end-to-end on airframes, hardware, firmware, and fleet software, flying test flights, analyzing logs, and providing decisive feedback to engineering. This hands-on role requires autonomy and travel for field tests.

Qualificações

  • Citizenship required for export‑controlled data access.
  • 3+ years hands‑on FPV/small multirotor experience (build/flight/repair).
  • Must hold Part 107 Remote Pilot Certificate.
  • Experience configuring plus tuning flight controllers on one or more stacks (Betaflight/INAV/ArduPilot/PX4).
  • Strong soldering and electrical skills (harnesses, power distribution).
  • Familiarity with RC links, FPV video (analog/digital), LiPo/Li‑ion safety.
  • Systematic approach to troubleshooting hardware, firmware, RF, config faults.
  • Willingness to travel for test events and field work.
  • Ability to work independently with limited oversight and under pressure.

Responsabilidades

  • Build, modify, and maintain small UAS from FPV quads to swarm airframes.
  • Flash and tune flight controllers across stacks, adjust parameters and safety features.
  • Integrate radios, GNSS, companion computers, and payloads into airframes and swarm software.
  • Bench-test hardware and software before flight; perform SITL/HITL where applicable.
  • Plan and conduct test flights from single to multi‑aircraft swarm tests.
  • Analyze flight logs (ArduPilot, PX4) to diagnose issues and document fixes.
  • Troubleshoot failures to root cause across hardware, firmware, RF, configuration.
  • Test new software releases and report bugs with reproducible steps/logs.
  • Write and maintain build sheets, baselines, and field‑ready test reports.
  • Prepare and pack aircraft kits for deployments; manage shop inventory and spares.
  • Travel to support test events, field deployments, and mission engineers.

Conhecimentos

U.S. citizenship
3+ years FPV/small multirotor build/fx
Part 107 Remote Pilot Certificate
Flight controller tuning (Betaflight, 
Soldering and wiring
RC control links and FPV video systems
Systematic troubleshooting
Willingness to travel
Independent work style
Ability to work under operational压力

Ferramentas

Betaflight
INAV
ArduPilot
PX4

Descrição da oferta de emprego

Apium Swarm Robotics (ASR) is revolutionizing swarm autonomy software for air, surface, undersea, and ground vehicles operating across dual-use commercial and defense environments. Our systems are deployed on real platforms, tested in the field, and delivered to customers operating in complex, uncertain, and safety-critical conditions.

We do not build research prototypes or slideware. Our software is integrated into real vehicles, tested in the field, and delivered to customers who depend on operational reliability, speed of execution, and mission relevance. We prioritize performance over hype.

ASR systems represent the next phase in autonomy: collaborative swarming. These are not like pre-programmed drones for light shows. We are creating real-time cooperative management that lets one operator control dozens to hundreds of vehicles in real-time with the ease of controlling a single vehicle. As such, this role requires comfort with responsibility, ambiguity, and operational accountability.

Integration Engineering owns the build-test-fly loop. This role sits between our software engineers and our Mission Engineers: you take new airframes, hardware, firmware, and swarm software releases, integrate them on real aircraft, and prove them on the bench and in the air before they go to the field.

This is a hands‑on, on‑site role at our San Diego facility. You will spend your days building, configuring, testing, flying, breaking, and fixing small unmanned aircraft. It is not primarily customer‑facing. You will travel when a test event, integration sprint, or field problem needs the person who built the system.

You will work with a high degree of autonomy, own your builds end to end, and give direct, evidence‑based feedback to engineering on what works, what fails, and why.

Essential Duties And Responsibilities
  • Build, modify, and maintain small UAS from FPV quads to ASR swarm airframes: soldering, wiring harnesses, power distribution, and motor, ESC, and flight controller installation
  • Flash, configure, and tune flight controllers across multiple autopilot stacks (e.g., ArduPilot, PX4), including firmware, parameters, PID and filter tuning, failsafes, and flight modes
  • Integrate radios, datalinks, GNSS/compass, companion computers, and payloads into airframes and into ASR’s swarm software
  • Bench-test hardware and software before it flies: power, RF link, sensor, and configuration checks, plus simulation (SITL/HITL) where applicable
  • Plan and fly test flights, from single-aircraft checkouts to multi-aircraft swarm tests
  • Pull and analyze onboard flight logs (e.g., ArduPilot DataFlash, PX4 ULog) to diagnose vibration, tuning, power, and link issues
  • Troubleshoot failures to root cause across hardware, firmware, configuration, and RF, and document the fix
  • Test new software releases and report bugs to engineering with reproducible steps and supporting logs
  • Write and maintain build sheets, configuration baselines, and test reports so every build is repeatable and supportable in the field
  • Prepare, check, and pack aircraft kits for deployments, and maintain shop inventory, spares, and test equipment
  • Travel as needed to support test events, field deployments, and Mission Engineers
Required Qualifications
  • U.S. citizenship (this position requires access to export‑controlled technical data)
  • 3+ years of hands‑on experience building, programming, and flying FPV or small multirotor aircraft (personal, professional, or military); building means from parts, including soldering, flashing, tuning, and repairing after a crash
  • Part 107 Remote Pilot Certificate
  • Proficiency configuring and tuning flight controllers on at least one firmware stack (e.g., Betaflight, INAV, ArduPilot, PX4)
  • Strong soldering and electrical skills: harnesses, connectors, power distribution, reading pinouts and wiring diagrams, and multimeter use
  • Working knowledge of RC control links, FPV video systems (analog and digital), and safe LiPo/Li‑ion battery handling
  • Systematic troubleshooting, able to isolate hardware, firmware, RF, and configuration faults
  • Must live in the San Diego area or be willing to relocate (relocation assistance available)
  • Willingness and ability to travel when needed, sometimes on short notice
  • Comfort working independently with limited oversight
  • Ability to remain calm and effective under operational pressure
Additional Desired Qualifications
  • ArduPilot and/or PX4 experience (strongly preferred), including parameter tuning and log analysis
  • Mission Planner and/or QGroundControl
  • MAVLink integration, tooling, or scripting
  • Lua scripting on ArduPilot
  • Experience modifying firmware or building custom firmware targets
  • Companion computers (e.g., Raspberry Pi, NVIDIA Jetson), Linux command line, and Python scripting
  • Experience integrating mesh or IP‑based datalinks
  • CAD and 3D printing for mounts, brackets, and enclosures
  • Multi‑vehicle or swarm flight experience
  • Military experience building, maintaining, or operating unmanned systems, including unit‑level FPV programs
  • Experience working in defense, export‑controlled, or government‑adjacent environments
  • U.S. security clearance or ability to obtain one
Physical Requirements and Working Conditions
  • Work on‑site full time at our San Diego facility; this is not a remote or hybrid role.
  • Ability to travel when required, including occasional international travel.
  • Ability to work irregular hours around flight‑test windows and deployments.
  • Ability to work safely around LiPo and Li‑ion batteries, soldering equipment, 3D printers, and spinning propellers, and to lift and transport field equipment as required.
Background Check

This position will require successfully completing a post‑offer background check. Qualified candidates with a criminal history will be considered and are not automatically disqualified, consistent with federal and state law.

EEO and ITAR/EAR Work Authorization Disclosure

Red Cat Holdings is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability, genetics information, protected veteran status, sexual orientation, gender identity or expression, citizenship or immigration status, or any other characteristic protected by federal, state or local laws. Certain positions may require access to hardware, software, technology or technical data controlled under the International Traffic in Arms Regulations (“ITAR”) and the Export Administration Regulations (“EAR”). Such access may be provided without export authorizations to individuals who meet the applicable definition of a “U.S. person.” This generally includes U.S. citizens and nationals, lawful permanent residents, refugees, and asylees. Applicants who do not meet the definition of a U.S. person may be considered for employment where Red Cat Holdings can obtain any required export authorization or implement an appropriate access‑control arrangement. Employment decisions will be made in accordance with applicable export‑control requirements and anti‑discrimination laws. Applicants must be legally authorized to work in the United States. Any requirement concerning immigration sponsorship will be stated separately and will not be used as a substitute for an individualized export‑control assessment.

E-Verify

The company participates E-Verify ensure eligibility for employment and compliance with Right to Work rules.

Compensation: $90,390 - $141,335, plus eligibility for performance‑based bonuses, highly competitive equity grants, and full benefits.

Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

Integration Engineer Swarm Systems
Integration Engineer Swarm Systems

Red Cat Holdings • San Diego (CA)

Presencial
USD 90 000 - 141 000
Software Engineer, Swarm Systems
Software Engineer, Swarm Systems

Red Cat Holdings • Salt Lake City (UT)

Teletrabalho
USD 80 000 - 120 000
Generous annual equity package
Potential bonuses
Remote work opportunities
Manufacturing Engineering Technician
Manufacturing Engineering Technician

Red Cat Holdings • San Diego (CA)

Presencial
USD 45 000 - 65 000
Senior Autonomous Behavior Engineer
Senior Autonomous Behavior Engineer

Red Cat Holdings • San Diego (CA)

Presencial
USD 120 000 - 200 000
Senior Autonomous Behavior Engineer
Senior Autonomous Behavior Engineer

APIUM Swarm Robotics - A Red Cat Company • San Diego (CA)

Presencial
USD 120 000 - 200 000
Advanced Product Development & Integration Engineer - Embedded Systems & Autonomy
Advanced Product Development & Integration Engineer - Embedded Systems & Autonomy

Red Cat Holdings • Salt Lake City (UT)

Presencial
USD 90 000 - 130 000
Manufacturing Engineering Technician
Manufacturing Engineering Technician

APIUM SWARMING TECHNOLOGIES INC • San Diego (CA)

Presencial
USD 45 000 - 65 000
Equity package
Bonuses
Senior Software Engineer
Senior Software Engineer

FlightWave Aerospace - A Red Cat Company • Torrance (CA)

Presencial
USD 132 000 - 183 000
Senior Software Engineer
Senior Software Engineer

Red Cat Holdings • Torrance (CA)

Presencial
USD 132 000 - 183 000
Principal Mechanical Engineer
Principal Mechanical Engineer

Red Cat Holdings • Torrance (CA)

Presencial
USD 181 000 - 283 000