Integrated Life Safety & Physical Security Field Technician

JARBO; United States; On-site; USD 52,000 - 85,000; Full time

Job summary

100Hires, Inc. seeks a skilled Fire Alarm and Security Systems Technician to install, service, and troubleshoot fire alarm, access control, intrusion, and IP video systems at commercial sites.

You will program fire alarm panels, start up devices, and ensure code compliance with NFPA 70/72, reading blueprints and site drawings. Responsibilities include pulling low-voltage cabling, installing readers and door hardware, performing tests, documenting results, and coordinating with installation teams

Qualifications

• Experience with commercial fire alarm, access control, intrusion, or IP video systems.
• Ability to read blueprints and electrical drawings; NFPA familiarity is preferred.
• Comfort with testing meters and low-voltage installation tools.

Responsibilities

• Install, service, troubleshoot, repair, and upgrade fire alarm, access control, intrusion, and IP video systems.
• Program and startup fire alarm panels; test devices and circuits for performance and code compliance.
• Install card readers, door contacts, and related hardware.
• Diagnose wiring, programming, and equipment issues on new and existing systems.
• Pull, route, terminate, label, and test low-voltage cabling; cable pathways including concrete drilling.
• Install sensors and equipment at commercial sites from ladders and lifts (20–60 feet).
• Read blueprints, site maps, wiring diagrams, and system drawings.
• Commission and test systems before turnover; document results timely.
• Assist with pre-installation planning; provide on-site and remote escalation.
• Coordinate schedules and materials with Installation Leads and PMs.
• Ensure compliance with local/state/federal, electrical, fire, and life-safety standards.

Skills

Fire alarm systems

Access control

IP video/CCTV

Low voltage installation

Blueprint reading

NFPA 70/72 knowledge

Electrical testing

Troubleshooting

Customer service

Education

NICET certification preferred

Life Safety/Fire Alarm license

Tools

Notifier

Simplex

LenelS2

Genetec

Software House/C1CURE

Avigilon

AMAG

DMP

HID

Job description

Step into a day where your technical skill protects people and propertyIt’s 7:45 AM. You review site drawings, load your meter and laptop, and head to a commercial facility. By 9:00 AM, you’re mounting initiating devices, routing low‑voltage cable, and bringing a new fire alarm control panel online. Midday you validate notification circuits, document results, and verify compliance with NFPA 70 and NFPA 72. After lunch, you pivot to security—commissioning an access control panel, enrolling credentials, aligning door contacts and REX devices, and dialing in IP cameras for crisp video. Before you leave, you walk the customer through system operation, close out documentation, and schedule the next service window with the Project Manager.Core ResponsibilitiesInstall, service, troubleshoot, repair, and upgrade commercial fire alarm, access control, intrusion, and IP video/CCTV systemsProgram and start up fire alarm control panels; test devices and circuits for performance and code complianceInstall card readers, door contacts, request‑to‑exit devices, electric strikes, maglocks, controllers, and related hardwareDiagnose and correct wiring, programming, communications, and equipment issues on new and existing systemsPull, route, terminate, label, and test low‑voltage cabling; complete cable pathway tasks including concrete drilling and limited conduit bendingInstall sensors and equipment at commercial sites, including work from ladders and lifts (approximately 20–60 feet)Read and interpret blueprints, site maps, wiring diagrams, electrical layouts, and system drawingsCommission and functionally test systems prior to turnover; maintain accurate, timely documentationAssist with technical planning and pre‑installation; provide on‑site and remote technical escalationCoordinate schedules, materials, and milestones with Installation Team Leads and Project ManagersEnsure all work meets applicable local, state, federal, electrical, fire, and life‑safety requirements; follow company, customer, and OSHA safety standardsWhat You BringCommercial field experience with one or more: fire alarm, access control, intrusion detection, IP video/CCTV, or commercial low‑voltage systemsAbility to independently install, test, troubleshoot, and service low‑voltage systemsComfort reading blueprints and electrical drawings; understanding of terminations, devices, control panels, and system communicationsWorking knowledge of NFPA 70 and NFPA 72Confidence using meters, hand/power tools, drills, and common low‑voltage installation equipmentWillingness to work from lifts at heights of roughly 20–60 feetStrong problem‑solving, customer service, and communication skills; comfortable working independently at customer sitesProficiency with smartphones, laptops, email, spreadsheets, and electronic work‑management systemsValid driver’s license meeting company driving requirements; reliable transportation during the initial training period before a company vehicle is issuedBasic PPE and appropriate technician toolsCertifications & LicensingNICET certification is strongly preferredCurrent state Life Safety, Fire Alarm, Physical Security, or related license where requiredManufacturer certifications are a plusCandidates with solid hands‑on commercial experience are encouraged to apply even if every preferred certification isn’t in hand.Preferred PlatformsFire Alarm: Notifier, Fire‑Lite, Simplex, EST/Edwards, Siemens, Gamewell‑FCI, Silent Knight, Honeywell, Bosch, or similarAccess Control / Security: LenelS2, Genetec, Software House/C•CURE, Avigilon, AMAG, Brivo, DMP, Honeywell, Bosch, HID, or similarExpertise in a specific brand is not required if you bring strong, transferable fire alarm, security, electrical, or low‑voltage experience.Travel & SchedulePrimarily local/regional with approximately 20–30% travel; occasional overnightsDay shift, generally around 8:00 AM–5:00 PMSome night, weekend, or off‑shift work based on customer or project needsActive commercial job site environmentsWho Thrives HereTitles that often align with this work:Fire Alarm Technician | Fire Alarm Service Technician | Security Systems Technician | Electronic Security Technician | Access Control Technician | Life Safety Technician | Alarm Technician | Low Voltage Technician | Field Service TechnicianWe’re especially interested in technicians who have moved beyond basic cabling and can troubleshoot, test, program/configure, interpret plans, and solve technical challenges in the field.Why This RoleBroaden your expertise across fire alarm, access control, intrusion detection, IP video, networking, and integrated security—balancing new installs with service and commissioning.Technical ProficienciesElectrical InstallationElectrical TroubleshootingNational Electrical Code (NEC)Electrical / Electronic SystemsField Service ReadinessLow Voltage Cabling InstallationAccess Control SystemsVideo Surveillance (CCTV)Blueprint Reading