Inspector II, 1st shift

Regal Rexnord Corp; Downers Grove (IL); On-site; USD 26,174 - 44,083; Full time

Benefits offered by this job

Competitive hourly wage up to $32/hr

401(k) with company match

Medical, dental, vision insurance

Education reimbursement

Job summary

Regal Rexnord in Downers Grove, IL is seeking an onsite Quality Inspector to cover Final, Heat Treat, Plating, and other inspection areas. You will support shift-wide quality objectives, maintain documentation, and assist when bottlenecks occur.

This role emphasizes adherence to safety rules and timely production targets. You will work with a team to ensure NCRs are created for discrepancies and that metrology and gauging are set up accurately.

Qualifications

• Requires US Person with permanent residence (US Citizen or Green Card).
• AS9102 First Article Inspection knowledge and quality planning tools.
• Understanding ISO/AS quality systems and aviation standards.
• Strong math aptitude and blueprint interpretation.
• Proficiency with Microsoft Office 2000+.

Responsibilities

• Perform inspection operations across Final, Heat Treat, Plating, Receiving, OSP, In-Process, and First Article stages.
• Create NCRs and remove nonconforming material.
• Maintain SQDC metrics and ensure procedural compliance.
• Document inspection data and organize paperwork at shift end.
• Coordinate with Quality to ensure smooth area flow and cover absences.
• Escalate quality issues or stoppages promptly.
• Set up and verify gauges per specifications and assist in gauging design.

Skills

Inspection experience

AS9102 FAI

Geometric Dimensioning and Tolerancing

Reading blueprints/drawings

Quality planning

Microsoft Office

Time management

Communication skills

Metrology basics

Calibration knowledge

Education

High school diploma or equivalent

ASQ Certification CQT

Tools

Gauging equipment

SPC

GR&R

Cpk

DMAIC

Job description

Work Model: This is a fully onsite role, with work performed at your designated Regal Rexnord office.

This position covers several areas of Inspection responsibility throughout the facility. This position is a critical link between the shop floor associates, and the engineering specifications and requirements. The person in this role will ensure that performance standards are met and take appropriate action where necessary to meet agreed deadlines, quality performance, and production targets. The role also includes cross training throughout the department and assisting when there is a bottleneck in an inspection area, vacation fill‑ins, or managing absences. You will be responsible for supporting team cohesion within the department and the facility and lead by example.

Working hours: 8am-4pm

Key accountabilities

• Ensure strict adherence to and implementation of Company Safety and Work rules.
• Performs inspection operations in each of the following areas:
  • Final Inspection
  • Heat Treat Inspection
  • Plating Inspection
  • Receiving QC Inspection
  • Pre/Post OSP Inspection
  • In-Process Inspection
  • First Article Inspection
• Responsible for creation of nonconformance documentation (NCRs) when discrepancies are detected at any inspection stage. Removal of the discrepant material from the production areas.
• Maintain and support SQDC (Safety, Quality, Delivery, and Cost) metrics in all areas assigned.
• Ensure that all quality requirements are being followed including procedural compliance and defect reporting. Act as a liaison between production associates and quality requirements.
• Maintaining all inspection data during daily inspections and responsible for ensuring all paperwork is in its proper place at the end of the shift.
• Communicate and coordinate with other members of the Quality team to ensure that all areas flow efficiently. Aid in absenteeism coverage to ensure all production requirements are met.
• Escalate production and assembly quality issues or work stoppages caused by a quality issue immediately.
• Set up and adjust gauges using required equipment or masters per specification requirements. This includes periodic verifications of gage set‑up.
• Work with quality engineering in the design of new or modified gauging when required.
• Ability to help the manufacturing area in troubleshooting and resolving gage issues.

Qualifications

• This position requires the applicant to be a US Person with a US permanent residence. A US Person is a US Citizen or Green card holder.
• High school diploma or equivalent.
• 2-3 years of Inspection experience in a manufacturing environment demonstrating increasing accountability.
• 2-3 years previous Aerospace DSQR experience preferred.
• Qualified experience, ASQ Certified CQT CMI a plus.
• Thorough knowledge of the AS9102 (FAI's) First Article Inspection process, and Quality Planning tools (including SPC, GR&R, Cpk, GD&T, DMAIC, First Piece Inspection, Cost of Quality).
• Understanding and basic knowledge of all aviation industry compliance standards required, including ISO and AS 9000 quality systems, ISO 10012, AS9100, ISO9001, FAA FAR regulations.
• Strong application knowledge of calibration and metrology systems including the development, improving, and approving gauging methodologies and design. Qualifications should include general or application knowledge of; quality assurance systems, Geometric dimensioning and tolerancing, blue print interpretation, and process capability analysis.
• Effective communication skills - strong written and verbal communication skills. Including developing, implementing, and maintaining procedures, work instructions, and related forms that support the Quality system.
• Basic math aptitude.
• Working knowledge of engineering part drawings and general understanding of metallurgy; ability to understand the physical and mechanical properties of metals as affected by composition, mechanical working and heat treatments including metal cutting and grinding is desirable.
• Demonstrated proficiency in time and project management.
• Training and experience in Microsoft Office 2000 or greater.
• Ability to lift up to 50 pounds repetitively throughout the shift.

Rewards

• Competitive Hourly Wage up to $32/hr
• Matching 401(k) contribution

Exceptional Benefits

• Medical Insurance
• Dental Insurance
• Vision Insurance
• Short-Term Disability Insurance
• Long-Term Disability Insurance
• Accidental Death and Dismemberment Insurance
• Life Insurance
• Flexible Spending Accounts (Medical and Dependent Care)
• Educational Reimbursement

Benefits

• Medical, Dental, Vision and Prescription Drug Coverage
• Spending accounts (HSA, Health Care FSA and Dependent Care FSA)
• Paid Time Off and Holidays
• 401k Retirement Plan with Matching Employer Contributions
• Life and Accidental Death & Dismemberment (AD&D) Insurance
• Paid Leaves
• Tuition Assistance

About Regal Rexnord

Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company's electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company's automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools.

The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.

Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com.

Equal Employment Opportunity Statement

Regal Rexnord is an Equal Opportunity and Affiative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you'd like to view a copy of the company's affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email [e-mail]. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e‑mail [e-mail].

Notification to Agencies

Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third‑party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third‑parties for hires made.

Equal Employment Opportunity Posters