Hand Operations 2nd Shift

Fairbanks Morse, LLC

Beloit (WI)

On-site

USD 25,000 - 39,000

Full time

12 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Fairbanks Morse, LLC in Beloit, WI is seeking a skilled technician to perform a variety of hand operations including cleaning, deburring, welding prep, and pneumatic/steam cleaning. You will operate shot blast equipment, apply heresite and parco treatments, and follow blueprints and process documents with tight tolerances.

Work involves handling ferrous and non-ferrous parts, using grinders, scales, gages, and cleaning solvents while maintaining safety and quality standards.

Qualifications

  • Ability to perform hand operations and precision work per blueprints
  • Experience with cleaning, deburring, grinding, welding cleanup, shot blasting, and parco/heresite processes

Responsibilities

  • Clean and DeBurr: Clean parts and blocks, deburr burrs and sharp edges, re-ream, re-tap, assemble parts, blend and polish, wash parts, sand blast small parts, drill and tap by hand, water/hydro test, identify porosity, grind contours per templates, stamp identification, paint as specified, hold tolerances ± .001.
  • Weldment Clean and Shot Blast: Remove weld splatter, disc sand surfaces, paint parts, drill and tap covers, load into shot blast booth, operate shot blast to remove scale, dirt, rust, perform minor repairs.
  • Heresite: Apply masking to liners, fill liner jacket water passage with heresite, bake, spray and back injection, re-tap, clean excess, cob blast rusted parts.
  • Parco Operations: Operate parco tanks, clean and rinse, move through solutions, load/unload cylinder liners, rework liners, hand tap, maintain tanks and solutions.

Job description

Primary Function:

Perform a variety of hand operations including clean and burr parts, clean weldments, operate shot blast, perform heresite, parco or other apply other treatments to parts.

Tools & Equipment: Various grinders, wheels and stones, cleaning equipment such as wash booth or steam cleaner, hand tools, scales, plugs, gages, cleaning solvents and preservatives, taps and compound, filler, tanks and solutions, ovens, blueprints process documents, hoists, laboratory specifications, solutions, cranes, forklifts.

Materials: Ferrous and non-ferrous metals

Source of Supervision: Team Leader/Coordinator

Direction Exercised: None

Working Procedure:

Clean and DeBurr

Clean parts and blocks as instructed, performing operations such as file burrs and sharp edges, re-ream, re-tap for proper assembly, disassemble and assemble parts to perform cleaning operations. Blend and polish areas deburred. Wash parts in wash tank or steam clean and blow dry. Sand blast smaller parts as required. Clean holes, drill and tap by hand, using gages to check parts is in accordance with specifications. Water and hydro test parts. May be required to use imprex machine to identify and repair porosity problems. Perform work to blueprint instructions. Templates may be used to grind contours as needed. Stamp with proper identification as needed. Paint with filler as specified. Work to tolerances of ± .001.

Weldment Clean and Shot Blast

Chips, grind and wire brush weld splatter from weldments. Disc sand surfaces. Paint parts with cold water paint, plug openings, test for leaks. Drill and tap covers for layout.

Load pieces into shot blast booth. Puts on personal protective equipment. Shot blasts castings or weldments to remove scale, dirt or rust. Add shot to the machine as required and make minor repairs and adjustments.

Heresite

Apply masking equipment to liners, plug holes, fill liner jacket water passage are with heresite, rotate 180 degrees each way. Remove plugs and drain heresite. Clean excess heresite from liners. Bake in over for required periods. Spray and back injection hold openings on jacket. Re-tap threads and check dimensions with thread gage. Also perform heresite operation on other miscellaneous parts as required. Tolerances held to .0015 minimum thickness. Clean booth, wash plugs and bands with thinner, light and tend oven. Cob blast rusted parts as required.

Parco Operations

Operate parco tanks to rust proof parts, performing duties such as dip parts in oakite solution to clean, move to rinse tank, move to granoseal solution, leave in solution time necessary to complete oxidation process, move to rinse tank and then to soluble oil solution. Load and unload cylinder liner boxes and stage cylinder liners for parco process. Rework liners as required. Hand tap cylinder liners after process is completed. Perform maintenance duties such as clean tanks, mix solutions to laboratory specifications, test solutions for proper strength.

May be required to assist with maintenance of paint records, and lift medium weight materials by hand, hoist or crane.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Hand Operations 2nd Shift
Hand Operations 2nd Shift

Fairbanks Morse • Beloit (WI)

On-site
USD 25,000 - 39,000
3rd Shift Burnishing Operator
3rd Shift Burnishing Operator

Nemco Food Equipment • Hicksville Township (OH)

On-site
USD 17,000 - 22,000
Millwright-Welder
Millwright-Welder

Anchor Hocking • Lancaster (OH)

On-site
USD 55,000 - 75,000
TiAl Gate Removal Operator - Deer Creek (Portland, OR)
TiAl Gate Removal Operator - Deer Creek (Portland, OR)

Precision Castparts Corp. • Milwaukie (OR)

On-site
USD 25,000 - 34,000
3rd Shift Burnishing Operator
3rd Shift Burnishing Operator

Nemco Food Equipment, LTD. • Kentucky

On-site
USD 21,000 - 30,000
Fabricator
Fabricator

Constellium Deutschland GmbH • Ravenswood (WV)

On-site
USD 42,000 - 63,000
Finishing Tech - Swing Shift
Finishing Tech - Swing Shift

Key Technology • Walla Walla (WA)

On-site
USD 21,000 - 30,000
Finishing Tech - Day Shift
Finishing Tech - Day Shift

Duravant • Walla Walla (WA)

On-site
USD 25,000 - 39,000
Paint Line Operator, 2nd Shift
Paint Line Operator, 2nd Shift

GH Metal Solutions • Fort Payne (AL)

On-site
USD 32,000 - 52,000
Finishing Tech - Day Shift
Finishing Tech - Day Shift

Key Technology • Walla Walla (WA)

On-site
USD 21,000 - 30,000