TiAl Gate Removal Operator - Deer Creek (Portland, OR)

Precision Castparts Corp.

Milwaukie (OR)

On-site

USD 25,000 - 34,000

Full time

10 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Precision Castparts is seeking a burnoff/gating operator to remove gating from castings with tight tolerances and to prepare parts for subsequent cleaning. You will operate an air carbon arc torch, use pneumatic tools, and perform precision cuts while protecting castings from damage.

The role requires reading technique cards, basic math, and clear communication. You will participate in training, maintain equipment, and document production activity while adhering to safety procedures.

Qualifications

  • Experience with air carbon arc torch or welding equipment.
  • 3–6 months experience in other Cleaning Operations with precision tasks.
  • Ability to read and interpret Technique Cards, routers and other special instructions.
  • Ability to perform basic mathematical calculations.
  • Ability to communicate effectively both verbally and in writing.
  • Ability to work independently.
  • Physical ability to perform the essential job functions.

Responsibilities

  • Operate air carbon arc torch in burnout booth to cut and separate gating systems from parts as close to the finished dimensions as practical.
  • Clean shell material from around gating using pneumatic tools.
  • Mix protective coating and coat castings for protection.
  • Cut, clean, document and verify test bars for proper identification and routing.
  • Sort gating by metal alloy for revert processing and remove gating with abrasive saws.
  • Section cuts castings and gating for engineering evaluation as needed.
  • Perform routine maintenance on burnoff equipment and tools.
  • Meet all production and quality standards and complete logs and records.

Skills

Air carbon arc torch operation
Reading technique cards
Precision finishing
Basic math
Verbal and written communication
Independent work

Tools

Air arc torch equipment
Pneumatic tools

Job description

Mission

To separate gating systems from castings using rods or torches within close tolerances to reduce grinding time and other potential rework. To prepare castings for saws and other cleaning operations by separating gating systems without damaging castings.

Principal Accountabilities
  • Gating Removal

Objective: to apply developed skill, understanding, mastery of equipment and understanding of the dimensional requirements of finished parts to remove gating system metals from castings achieving close tolerances within one-eight inch or less of finished part dimensions. Finished work products generally exceed tech card standards for cleaning operations.

Essential Job Functions
  • Verifies correct lot numbers and serialization; reviews Technique Cards.
  • Operates air carbon arc torch in burnout booth to cut and separate gating systems from parts cuts as close to the part as practical without damaging castings
  • Cleans shell material from around gatings using pneumatic tools. (Marginal job function at LSBO and SSBO).
  • Mixes protective coating; coast castings for protection.
  • Cuts off, cleans, documents and verifies test bars for proper identification and routing.
  • After removal, sorts gating by metal alloy for revert processing.
  • Removes gating and test bars using abrasive saws. (SSBO and LSBO only).
  • Section cuts castings and gatings for evaluating by engineering as needed. (LSBO and SSBO only).
  • Maintenance

Objective: to maintain burnoff equipment in proper working order.

Essential Job Functions
  • Performs minor maintenance on equipment, including torches, hand tools, stingers, and gas lines.
  • Contacts maintenance or advises supervisor of need for other equipment repairs/maintenance.
  • Training, Interaction and Documentation

Objective: to participate in the assessment of burnoff skills of new operators and provide training necessary to achieve tech card standards. To communicate, share information, accept criticism and input from grinders and others and document work when necessary.

Essential Job Functions
  • Accept assignment of new burnoff operator(s) for training. Provide training necessary to such individual(s) to develop necessary job skills.
  • Provide feedback to supervision regarding progress of individual trainees and assessments of observed performance upon request.
  • Communicate with supervisory and/or grinding personnel regarding tolerances achieved on parts, amount of grinding necessary or additional burnoff possible on specific areas of parts. Accept and productively apply input, criticism and feedback to improve quality of future work product - particularly when working on new parts.
  • Work with others including supervision, engineers, grinding, etc. to develop techniques for improving tolerances achieved and establish precision tolerances attainable on new or modified parts.
  • Safety:
  • Adheres to plant and department safety rules.
  • Safely operates all equipment and tools.
  • Identifies and reports safety problems.
  • Participates in safety audits (SSBO only).
  • May be required to work with hazardous waste.

NOTE: for job positions that require respiratory protection (more than a filtering face piece – dust mask): In compliance with the Oregon Occupational Safety and Health Division Personal Protective Equipment standard for Respiratory Protection, OAR 437, Div. 2/I 1910.134 and Oregon Health Division Rules for the Control of Radiation, OAR 333. Div. 120 (333-120-300 through 330), certain tasks within this job position require/may require the use of a NIOSH-approved respirator. An individual will not be assigned to these tasks if that the person is not able to work under these conditions. Respirator selection will be based on the work performed, exposure information, duration of use and any other relevant factors. If a tight-fitting respirator is required, facial hair, temple pieces on glasses or other items that interferes with the face-to-face piece seal of the respirator are not permitted.

  • Meets all production and quality standards.
  • Completes logs and records.
OTHER (Marginal) ACCOUNTABILITIES
  • Performs other tasks as directed.
Essential Equipment, Vehicles, Machinery And/Or Tools Used
  • Air carbon arc.
  • Air arc stingers and rods (LSBO and SSBO only) and gas arc torch (TBO only, marginal equipment at SSBO).
  • Hoists, straps, chains, hooks.
  • Forklift.
  • Pallet jack (marginal equipment at SSBO)
  • Basic hand tools (e.g. hammer, wrenches, screwdrivers, etc.)
  • Pneumatic tools (air gun and/or air hammer)
  • Knife.
  • Tip cleaner (TBO only).
  • Ground bar (LSBO, SSBO only).
  • Protex Spray Gun (LSBO, SSBO only).
  • Grates and bricks.
Training
  • PCC’s Forklift Driving Safety Certification Training must be completed.
  • May be required to complete Hazardous Waste and Solid Waste Management Training.
  • Radiation Safety Training must be completed (TBO only)
  • Visual Inspection Class must be completed. (SSBO only)
Qualifications
  • Experience with air carbon arc torch, or welding equipment.
  • Three to six months experience in other Cleaning Operations and demonstrated ability to perform precision tasks without damaging parts.
  • Ability to read and interpret Technique Cards, routers and other special instructions.
  • Ability to perform basic mathematical calculations. (addition, subtraction, multiplication, division)
  • Ability to communicate effectively both verbally and in writing.
  • Ability to resolve problems and share information with others particularly with regard to part dimensions, the potential and limits of effective burnoff techniques.
  • Ability to work independently.
  • Physical ability to perform the essential job functions.
Major Plant Differences
  • TBO - Operators work in radioactive controlled area and wear radioactive badges.
  • LSBO & SSBO - Operators also perform Sawyer duties.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

TiAl Gate Removal Operator - Deer Creek (Portland, OR)
TiAl Gate Removal Operator - Deer Creek (Portland, OR)

Precision Castpart • Salem (OR)

On-site
USD 42,000 - 65,000
TiAl Gate Removal Operator - Deer Creek (Portland, OR)
TiAl Gate Removal Operator - Deer Creek (Portland, OR)

Precision Castparts Corp. • Milwaukie (OR)

On-site
USD 30,000 - 39,000
Burner (Industrial Oxy-Fuel Cutting Torch Operator) - 1st Shift
Burner (Industrial Oxy-Fuel Cutting Torch Operator) - 1st Shift

Harrison Steel Castings Company • Attica (IN)

On-site
USD 32,000 - 48,000
Gate Removal Operator SSBO
Gate Removal Operator SSBO

Precision Castparts Corp. • Oregon

On-site
USD 25,000 - 36,000
Effluent Filtration/Waste Management Operator LPCT
Effluent Filtration/Waste Management Operator LPCT

Precision Castparts Corp. • Portland (OR)

On-site
USD 42,000 - 58,000
Hand Operations 2nd Shift
Hand Operations 2nd Shift

Fairbanks Morse, LLC • Beloit (WI)

On-site
USD 25,000 - 39,000
Cleaning (Burn Booth Operator)
Cleaning (Burn Booth Operator)

PRL Industries • Lebanon

On-site
USD 42,000 - 54,000
Cleaning (Burn Booth Operator)
Cleaning (Burn Booth Operator)

PRL, Inc. • Lebanon

On-site
USD 25,000 - 33,000
Finishing Tech
Finishing Tech

Key Technology • Walla Walla (WA)

On-site
USD 25,000 - 36,000
Burner Operator - 2nd Shift
Burner Operator - 2nd Shift

Kloeckner • Atlanta (GA)

On-site
USD 35,000 - 45,000