Finishing Technician - Night Shift

Mervin-Manufacturing-i; Sequim (WA); On-site; USD 28,000 - 33,000; Full time

Benefits offered by this job

401(k)

Medical Insurance

Vision Insurance

Long & Short-Term Disability

Employee Assistance Program

Paid Holidays

Paid Sick Time

Mountain & Surf money

Job summary

Mervin Manufacturing, home of Lib Tech, GNU, and Bent Metal, is seeking a Finishing Technician for the night shift in Sequim, WA. The role involves completing steps to prepare snowboards for shipment and supporting the quality-control process.

You will operate various finishing equipment, check board quality, and assist in the production flow. The position requires physical work, adherence to safety and instruction, and a willingness to work in a fast-paced factory setting.

Qualifications

• Strong communication skills are required as finishing technicians are part of the QC process.
• Must be able to perform the physical requirements repetitively.
• Ability to follow written and verbal instructions and adapt daily routines.

Responsibilities

• Retrieve boards from Lay-Up department.
• Cut out to general shape with band saw.
• Grind off excess material with deflash machine.
• Smooth tip and tail using finer sanding belt.
• Access inserts by drilling through top material and fiberglass.
• Tap threads to ensure clean threads.
• Bevel tip and tail with file or angle die-grinder.
• Bevel sidewalls with router.
• Grind base by hand on Reichmann belt grinder.
• Polish steel and sidewalls with belts and Scotch-Brite.
• Apply wax and buff with waxing equipment.
• Deliver boards to QC for inspection.

Skills

Strong communication

Attention to detail

Physical stamina

Self-motivated

Tools

Power tools

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Finishing Technician - Night Shift

Full Time Sequim, WA, US

3 days ago Requisition ID: 1589

$20.40 To $23.85 Hourly

Mervin Manufacturing, home of Lib Tech, GNU, and Bent Metal, is a leading designer and manufacturer of snowboarding, skiing and surfing products built at the world’s most environMENTAL factory by people who ride them. Mervin Manufacturing was founded by snowboarders Mike Olson and Pete Saari in 1977. In an industry where virtually every other snowboard, ski and surfboard company has moved production to China or offshore, Mervin is the longest running and last major board building factory in the USA. Based out of Carlsborg, Washington, between the rugged Olympic and Cascade Mountain Ranges, Mervin is a direct link between riding and manufacturing.

Must be 18 or older on first day of employment.

Salary Range: $20.40 To $23.85 Hourly

Job Purpose:

Finishing involves completing the various steps required to make a snowboard ready to ship. They need to be able to operate and adjust several different types of equipment used in the process. Finishers are also looked to for assistance in the Quality Control process. As the first people to see the boards after they have been pressed, they are in the best position to check several aspects of the boards such as banana height, base contour, flex, lamination, insert sizes, etc.

Duties & Responsibilities:

• Retrieve boards from Lay-Up department.
• Cut out to general shape with band saw.
• Grind off all excess material from perimeter of the snowboard with "deflash" machine.
• Smooth out tip and tail using same machine with finer sanding belt.
• Access the inserts by drilling through the top material and fiberglass.
• Tap threads if necessary, to remove resin and to make sure threads are clean.
• Bevel tip and tail using a file or angle die-grinder.
• Bevel sidewalls using table-mounted router.
• Grind the base by hand using Reichmann belt grinder.
• Polish the steel and sidewalls with fine grit belt and Scotch-Brite belt on side-sanding machine.
• Use power-feed base grinder to put finish on base using progressively finer belts, 120 grit, 150 grit, 180 grit, and Scotch-Brite.
• Apply wax using a power-feed waxing machine.
• Buff wax using a Reichmann belt grinder fitted with a waxing belt.
• Scrape excess material from the top edge of the board.
• Apply the proper stickers.
• Deliver boards to Q.C. for quality inspection.
• Other duties as assigned.

Qualifications:

• Strong communication skills are required as the finishing technicians are an important part of the QC process.
• Must be able to perform the physical requirements of the job repetitively.
• Must be able to follow written and verbal instructions.
• Adaptable to minor alterations in daily routine. Not all steps must be performed in the same order so each finishing technician is expected to alter their routine to take advantage of the open work areas and equipment.
• Will be working with hands 100% of the time. Strong eye-hand coordination is a plus.
• Experience with power tools is a plus.
• Self-motivated with excellent attention to detail.

Physical Requirements:

• Required to regularly stand and walk
• Frequently required to use hands to finger, handle, or feel; reach with hands and arms
• Occasionally required to climb and balance; stoop, kneel, crouch, or crawl and smell
• Regularly required to assist and lift up to 65 pounds.
• Frequently required to assist and lift up to 50 pounds.
• Vision requirements include close vision and distance vision

Become part of the Mervin Team!

Position Hours are Monday - Thursday 3:30pm to 2:00am

Pay Range: $20.40 to $23.85 per hour PLUS an additional $1.50/hr night shift differential

Starting rate is $20.40/hr with a $1.80/hr increase once fully trained and meeting quality and quota expectations. The position is based on a tiered pay scale with increased knowledge and abilities for each tier associated with an increase in wage.

What we offer:Competitive pay and benefits with a creative team environment!

• 401(k)
• Medical Insurance
• Vision Insurance
• Company paid Long & Short-Term Disability
• Employee Assistance Program
• Paid Holidays (to include the week between Christmas and New Year's EACH YEAR!)
• Paid Sick Time
• Mountain & Surf money (up to $100 reimbursement per year)
• Employee Demo Program
• Variety of Industry Discounts

Mervin Manufacturing has the right the modify or rescind the terms of employment. Terms of employment are contingent upon successful completion of:

• A background check
• Reference checks
• All requirement to establish the legal right to work in the United States (I-9 Verification)

Employment at Mervin Manufacturing is at-will. We are also an Equal Opportunity Employer that values workplace diversity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, or protected veteran status and will not be discriminated against on the basis of disability. For more information, please visit www.eeoc.gov .