Facilities Maint Mech 2 (52742)

Haas Automation

Henderson (NV)

On-site

USD 30,000 - 48,000

Full time

7 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Haas Automation, located in Henderson, NV, seeks a Facilities Maintenance Mechanic 2 to troubleshoot and repair facility equipment, including forklifts, A/C units, and compressors. The role emphasizes safety, hands-on maintenance, and collaboration with contractors.

The ideal candidate has a high school diploma or GED and 5–10 years of related experience, with a Haas forklift certification and proven ability to work with minimal supervision.

Qualifications

  • Active Haas Forklift certification required
  • Ability to work with little to no supervision
  • Excellent knowledge in troubleshooting facility related equipment
  • Expert in all phases of facility repairs in construction, remodeling, and maintenance of buildings and grounds
  • 5-10 years of related experience

Responsibilities

  • Adhere to safety requirements within the department and company.
  • Operate basic hand tools and powered equipment.
  • Drive equipment such as forklifts, scissor lifts, boom lifts and street vehicles.
  • Assist other level 2 mechanics with plumbing, electrical, and framing.
  • Assist contractors and vendors as needed.
  • Oversee preventive maintenance on facility equipment like forklifts, A/C units and compressors.
  • Develop repair procedures and training aids for Level 1 Technicians.
  • Operate material handling equipment including forklifts and cranes.

Skills

Troubleshooting facility equipment
Forklift operation
Safety compliance
Maintenance and repair

Education

High school diploma or GED
5-10 years of related experience

Tools

Forklift certification

Job description

Job Details

Job Location: Henderson, NV 89044, Education Level: High School, Salary Range: $22.00 - $35.00 Hourly

Summary

Facilities Maintenance Mechanic 2 Salary Range: $22.00 - $35.00/ Hr.

As the largest machine tool builder in the western world, we need world-class talent in all of our departments. And we’re not just looking for people for the production floor. Haas is a very vertically integrated company, with a wide range of high-tech career opportunities available.

Oh, and yes, we are the same Haas that owns the Haas Factory Racing Team, and Haas F1 Team from the Netflix series: Drive to Survive.

Troubleshoot and repair of facility related equipment, i.e., forklifts, a/c units, compressors, and machines.

Essential Duties and Responsibilities include the following. Other duties may be assigned.
  • Understands/adheres to safety requirements within the department and company.
  • Uses basic hand tools.
  • Drives equipment/ vehicles such as forklifts, scissor lifts, boom lifts and street vehicles.
  • Assist other level 2 mechanics with plumbing, electrical, and framing.
  • Assist contractors and vendors when needed.
  • Assist with managing the preventive maintenance on facility related equipment, i.e., forklifts, a/c units, and compressors.
  • Develop procedures for repairs and training aids for level 1 Technicians.
  • Must be able to operate both powered and non-powered material handling equipment including forklifts, pallet jack, cranes, and mobile straddle stacker lift.

Employees must report any damage to a supervisor or manager.

  • Employees are expected to follow instructions, procedures and to elevate any issue impacting workflow, quality, etc.
  • Employees must exhibit honesty and integrity as well as demonstrate adherence to rules, procedures and policies.
Supervisory Responsibilities

Supervisory Responsibilities

Supervised Employees

This job does not have any supervisory activities.

0

Qualifications

To perform this job successfully the candidate must be able to perform each essential duty adequately. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Minimum Qualifications
  • Maintain an active Haas Forklift certification.
  • Work with little to no supervision.
  • Excellent knowledge in troubleshooting facility related equipment.
  • Expert in all phases of facility repairs in, construction, remodeling, and maintenance of buildings and grounds.
Education
  • High school diploma or high school equivalency (HSE) credential such as general education degree (GED) is required, plus additional related experience, training and/or equivalent combination of education and experience.
Preferred Major
  • Other
Minimum Years of Experience
  • 5-10 years
Language Skills

Must have the ability to read, write, and comprehend instructions and safety rules; such as work instructions, short correspondence, and memos in English. Must be able to effectively present information to the following: in a one-on-one setting or small group situations for our customers, clients, and/or other employees of the organization.

Mathematical Skills

Must have the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. May need to compute rate, ratio, and percent and to draw and interpret graphs.

Reasoning Ability

Must have the ability to apply common sense and understanding in order to carry out written, oral, and/or diagram instruction forms. Must be able to deal with problems involving several concrete variables in standardized situations.

Physical Demands

Physical Activity

Duration

Sitting

Occasionally

Standing

Occasionally

Walking

Occasionally

Bending (neck)

Occasionally

Bending (waist)

Rarely

Squatting

Occasionally

Twisting (neck)

Occasionally

Twisting (waist)

Occasionally

Climbing

Occasionally

Kneeling

Occasionally

Crawling

Occasionally

Reaching (above shoulder level)

Occasionally

Reaching (below shoulder level)

Occasionally

Hand Use

Duration

Repetitive use of hand

Frequently

Simple grasping

Frequently

Power grasping

Frequently

Fine manipulation

Frequently

Pushing & Pulling

Frequently

Vision

Required

Close vision

Yes

Distance vision

Yes

Color vision

Yes

Peripheral vision

Yes

Depth perception

Yes

Adjust focus

Yes

Lifting Requirements

Duration

0-10 lbs.

Frequently

11-25 lbs.

Frequently

26-50 lbs.

Frequently

51-60 lbs.

Frequently

61+ lbs.

Never

Equipment Use

Duration

This position requires computer use, including monitor, keyboard, mouse, trackball, touchpad, etc.

Occasionally

Work Environment

Noise Level

The noise level in the work environment is usually:

Loud

Work Environment

Duration

This position operates in a general office or engineering lab environment

Never

Employee will work around machining or on the production floor

Constantly

Employee is exposed to moving mechanical parts and vibration

Frequently

Employee is exposed to hazardous chemicals, fumes or airborne particles

Occasionally

Employee is exposed to outside weather conditions, extreme cold or extreme heat

Frequently

Employee is exposed to risk of electrical shock

Occasionally

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mfg Eng 3 (51462)
Mfg Eng 3 (51462)

Haas Automation • Henderson (NV)

On-site
USD 81,000 - 143,000
Mfg Eng Supv (52086)
Mfg Eng Supv (52086)

Haas Automation • Henderson (NV), Oxnard (CA)

On-site
USD 91,000 - 173,000
Mfg Eng 1 (51460)
Mfg Eng 1 (51460)

Haas Automation • Henderson (NV)

On-site
USD 41,000 - 69,000
Mfg Eng 1 (52592)
Mfg Eng 1 (52592)

Haas Automation • Oxnard (CA)

On-site
USD 41,000 - 69,000
Mfg Eng 2 (51461)
Mfg Eng 2 (51461)

Haas Automation, Inc. • Henderson (NV)

On-site
USD 71,000 - 124,000
Inventory Assoc 1 (51627)
Inventory Assoc 1 (51627)

Haas Automation • Henderson (NV)

On-site
USD 42,000 - 54,000
Mfg Eng 2 (52616)
Mfg Eng 2 (52616)

Haas Automation • Henderson (NV), Oxnard (CA)

On-site
USD 71,000 - 124,000
Operator 2 (51734)
Operator 2 (51734)

Haas Automation • Oxnard (CA), Henderson (NV)

On-site
USD 29,000 - 41,000
Mfg Eng 1 (52592)
Mfg Eng 1 (52592)

Haas Automation, Inc. • Oxnard (CA)

On-site
USD 41,000 - 69,000
Mach Tool Maint 2 (50610)
Mach Tool Maint 2 (50610)

Haas Automation • Henderson (NV)

On-site
USD 30,000 - 48,000