Electronics Test Engineer II

TSI Incorporated; Illinois; On-site; USD 90,000 - 105,000; Full time

Benefits offered by this job

Health Insurance

401(k) with company match

Paid time off and holidays

Job summary

DICKEY-john, part of the TSI Incorporated family, seeks a Test Engineer II to design, verify, and support electronic products and embedded systems. You will develop test plans, analyze data, and create firmware and software solutions, collaborating with cross-functional teams to ensure performance, quality, and regulatory compliance.

The role covers product lifecycle from concept to production support, with hands-on testing, debugging, and equipment development in a standards-focused environment.

Qualifications

• Bachelor’s degree in Electrical Engineering, Computer Engineering, Software Engineering, or closely related field.
• Minimum of 2+ years of engineering experience in product development, testing, validation, or lab environments.
• Experience in embedded firmware using C/C++, electrical design, test equipment, and software development with C#, .NET.
• PCB analysis/design, production test systems, and product verification testing.

Responsibilities

• Design, develop, test, and debug circuits, embedded systems, software, test systems, and related hardware.
• Analyze data, identify root causes, and recommend corrective actions.
• Develop and maintain test protocols, validation procedures, and docs.
• Develop and troubleshoot embedded firmware using C/C++.
• Create software apps and UI using C#, .NET, Visual Studio.
• Develop, maintain, and improve test equipment and fixtures.
• Provide technical support to manufacturing for product/process/test issues.
• Troubleshoot production testers and manufacturing equipment.
• Other duties as assigned.

Skills

Embedded firmware development

Electrical circuit design

Test equipment development

Software development with C#/.NET

PCB schematic analysis

Manufacturing support

Product verification & validation

LabVIEW/Visual Studio/IAR

Troubleshooting & electromechanical

Education

Bachelor’s degree in Electrical/Computer/Software Engineering

Tools

LabVIEW

Visual Studio

IAR

OrCAD

Job description

Select how often (in days) to receive an alert:

Location: Auburn, IL, US, 62615

Who Are We?

Nestled in the heartland, DICKEY-john is at the center of the agricultural marketplace. With more than 60 years of helping farmers produce higher yields to feed the world, DICKEY-john is proud of our heritage and our contributions. As a part of the TSI Incorporated family, DICKEY-john employees also provide support for TSI solutions. TSI's vision to create a better world by helping to protect people, products and the environment is seen and experienced at all facilities, including our Auburn, Illinois DICKEY-john facility.

Test Engineer II at DICKEY-john

Is responsible for the design, development, verification, validation, and support of electronic products, embedded systems, software applications, and test equipment. Working with a moderate level of independence, this position applies electrical, software, and test engineering principles to support new product development, continuation engineering, manufacturing, quality, and customer support activities. The Test Engineer II develops and executes test plans, analyzes test results, troubleshoots product and system issues, designs and maintains test equipment, creates software and firmware solutions, and collaborates with cross-functional teams to ensure products meet performance, quality, regulatory, and customer requirements. The role serves as a key contributor throughout the product lifecycle, from concept development through production support and sustaining activities.

What Will You Do?

• Design, develop, test, and debug electrical circuits, embedded systems, software applications, test systems, and associated hardware.
• Analyze test data, interpret results, identify root causes of failures, and provide corrective action recommendations.
• Develop and maintain product test protocols, validation procedures, and supporting documentation.
• Develop, maintain, and troubleshoot embedded firmware using C/C++.
• Design and develop software applications and user interfaces using C#, .NET, Visual Studio, or similar development environments.
• Design, develop, maintain, and improve automated and manual test equipment, fixtures, and supporting systems.
• Provide technical support to manufacturing personnel for product, process, and test-related issues.
• Troubleshoot production testers and manufacturing equipment.
• Other duties as assigned.

QUALIFICATIONS

Education

Bachelor’s degree in Electrical Engineering, Computer Engineering, Software Engineering, or a closely related engineering discipline is required.

Experience

Required

• Minimum of 2+ years of engineering experience in product development, testing, validation, software development, or laboratory environments.
• Experience in several of the following:
• Embedded firmware development using C/C++
• Electrical circuit design and troubleshooting
• Test equipment development and validation
• Software development using C#, .NET, or similar environments
• PCB schematic analysis and design
• Production test systems and manufacturing support
• Product verification and validation testing

Preferred

• EMC/EMI testing and troubleshooting experience.
• Experience with automated test systems and data acquisition.
• FPGA, VHDL, or Verilog experience.
• Real-time operating systems (RTOS).
• CAN, USB, UART, SPI, I2C, RS232, RS485, Zigbee, or similar communication protocols.
• Digital signal processing knowledge.
• Product development experience from concept through production launch.
• Experience with LabVIEW, Visual Studio, IAR, OrCAD, or similar engineering development tools.

KNOWLEDGE

• Electrical engineering principles and electronic circuit design.
• Software engineering principles and best practices.
• Embedded systems architecture and development.
• Test and measurement methodologies.
• Product verification, validation, and qualification processes.
• Root cause analysis and troubleshooting techniques.
• Industry test standards and regulatory requirements.
• Engineering documentation and revision control practices.
• Manufacturing processes and product lifecycle management.

COMPETENCIES

• Blueprint and schematic reading.
• Software programming using software such as LabView, Visual Studio or IAR.
• Communication skills, as well as ability to interface with all levels of people.
• Competent presentation and writing skills.
• Troubleshooting and electromechanical skills.
• Skills with computer programs including Microsoft Word, Excel, PowerPoint, Outlook, and Visio.
• Strong analytical and problem-solving skills.
• Technical writing and documentation.
• Ability to manage multiple priorities and deadlines.
• Attention to detail and commitment to quality.
• High ethical standards and professionalism.

EQUIPMENT TO BE USED

Must be able to:

• Use standard office equipment such as computer, copier, fax, and telephone.
• Use electronic equipment such as multi-meters, oscilloscopes, function generators, power supplies, and environmental test equipment.
• Standard hand tools such as screwdrivers, ratchets and sockets, Allen wrenches, adjustable wrenches, and pliers.
• Utilize software development and engineering design tools.
• Manipulate and solder small components and assemblies during testing, troubleshooting, and development activities.

Work Environment & Physical Demands

Work is typically performed in a standard lab setting working at a desk or table on a level surface. Personal Protective Equipment (PPE) may be required in the lab, and PPE may be required when working in other parts of the manufacturing plant. Under normal conditions, exposure to excessive noise, dust, humidity, and fumes is rare. Individual may be required to work more hours than normally expected during a regular workweek depending on workload and deadline requirements. Must be able to lift up to 35 pounds.

This is a full-time position. Typical work hours are Monday through Friday, 7:00 a.m. to 3:30 p.m. Additional hours may be required based on workload, project schedules, testing requirements, or product launch activities.

Travel

The above activities may require some domestic travel.

What Can We Give You?

At TSI/DICKEY-john, our employees are our most valuable assets, and we care about their health and happiness. We offer a competitive benefits program to keep our employees and their family members protected and foster a healthy work-life balance. Additionally, we are committed to employee development and growth, and encourage and foster an environment of collaboration, and innovation. Our work has meaning and the products we design and build help protect people and the environment.

Dress for your day : We want our employees to be comfortable at work and we know they're comfortable when they're comfortable. The dress for your day policy allows employees' discretion to select appropriate dress for the business of each workday.
Free Beverages/On-site Cafeteria:Enjoy complimentary coffee, tea and hot chocolate each day at work. We also have a large cafeteria employees can eat lunch in, as well as an outside area that employees can enjoy during the summer months.

Flexible Work Arrangement: TSI/DICKEY-john employees can expect to have work-life balance, vacation, sick time, 8 paid holidays, bereavement leave, maternity/paternity leave, and more.

Pay and Benefits

Competitive market salary from $90,000 - $105,000 per year* depending on qualifications and experience. For eligible Leadership and individual contributor roles, additional bonus opportunities may be available and awarded at the discretion of the Company. Benefits include:

• Health Insurance: Comprehensive medical, dental, and vision coverage.
• Retirement Plan: 401(k) with company match.
• Paid Time Off Program: Paid time off, paid holidays, and paid floating holidays.
• Other Benefits: Life insurance, employee assistance program (EAP), and professional development opportunities.

*Pay amount does not guarantee employment for any particular period of time.

Legal authorization to work in the United States without the need for sponsorship. We require proof of eligibility to work in the United States.

EOE/Vet/Disability

DICKEY-john manufactures monitors, controllers, moisture testers, ground speed sensors, and a variety of other systems used in agricultural, public works, and analytical markets. Customers range from individual farmers to original equipment manufacturers (OEMs). No matter what the size, the expectations are the same: a cost-effective, technologically advanced, precision product.Visit our products at https://www.dickey-john.com/

Job Segment: Electronics Engineer, Test Engineer, Manufacturing Engineer, Software Engineer, Electrical Engineering, Engineering