Electronics/Hardware Engineer — Compliance & Certification

Autonomi Robotics; Orlando (FL); On-site; USD 100,000 - 150,000; Full time

Job summary

Autonomi Robotics, a developer of autonomous mobile robots for hospital logistics, is seeking a hands-on Electronics Engineer to own hardware compliance from the board level up. You will work directly with our CEO/CTO on UL 3300 and FCC readiness, shaping the certification roadmap for the next design cycle.

Based in Orlando, FL, this on-site role requires strong schematics, PCB layout, EMI/EMC testing, and experience with embedded MCUs.

Qualifications

• BS in Electrical Engineering or equivalent.
• 4+ years in hardware design and product compliance.
• Experience with UL 3300 or similar standards is a plus.

Responsibilities

• Lead UL 3300, UL 62368-1, and related certifications with the test lab.
• Own EMI/EMC pre-compliance testing in-house.
• Evaluate RF modules for FCC compliance and source replacements as needed.
• Reverse-engineer third-party hardware for BOM clarity and vendor negotiation.
• Support PCB design, layout review, and rework across subsystems.
• Coordinate with contract manufacturers to move designs to production.
• Maintain certification documentation and tracking.

Skills

Schematic capture

PCB layout

EMI/EMC testing

UL certification processes

FCC compliance

Embedded systems

Education

Bachelor's degree in Electrical Engineering

Tools

Altium Designer

Oscilloscope

Spectrum analyzer

Job description

About Us

Autonomi Robotics builds and deploys autonomous mobile robots for hospital logistics - pharmacy delivery, lab specimen transport, materials management, and more. Our fleet is moving through UL 3300 certification and FCC compliance ahead of broader US deployment.

The Role

We need a hands-on electronics engineer who can own hardware compliance from the board level up - someone equally comfortable with a schematic, an oscilloscope, and a UL test plan. You'll work directly with our CEO and CTO on an active hardware evaluation of our current AMR platform and lead the compliance-readiness effort for our next design cycle.

What You'll Do

• Lead UL 3300 (and adjacent: UL 62368-1, ISO 13849, IEC 61000-4 series) certification readiness, working directly with our test lab (Intertek/ETL)
• Own EMI/RF pre-compliance testing in-house (we have a Siglent SSA3021X + Tekbox probe set) ahead of formal chamber time
• Evaluate and qualify RF/cellular modules for FCC compliance, including sourcing and validating replacements for components affected by DoD/Covered List restrictions
• Reverse-engineer and document third-party hardware (service boards, SoC head units) for BOM/schematic clarity and vendor negotiation support
• Support PCB design, layout review, and rework across navigation, power/CAN, and HMI subsystems
• Work with contract manufacturers and hardware consultants to bring designs from prototype to certified production
• Maintain compliance documentation and standards tracking across our certification roadmap

What You Bring

• BS in Electrical Engineering or equivalent experience
• 4+ years in hardware design and product compliance, ideally for a certified electromechanical or robotics product
• Direct experience with UL certification processes (UL 3300, UL 62368-1, or similar) - you've taken a product through a test lab before
• Working knowledge of FCC Part 15 and EMI/EMC pre-compliance testing
• Comfortable with schematic capture and PCB layout tools (Altium preferred)
• Experience with embedded systems (ARM/STM32/GD32-class MCUs) and communications protocols (UART, CAN, I2C)
• Bonus: experience with cellular/RF module integration and qualification (Quectel, Telit, u-blox, etc.)
• Bonus: robotics, medical device, or safety-critical hardware background, and Chinese - Mandarin conversational ability.

Why Autonomi

You'll have direct ownership of a certification path that determines whether our robots ship - not a cog in a big compliance department. Ground-floor equity, real technical autonomy, and a fast-moving team building something that matters in hospitals.

Location: Orlando, FL (on-site at our Directors Row facility - this is a hands-on hardware role)