Electronics Assembler LRU and PCB

Skyeton

Fayetteville (NC)

On-site

USD 42,000 - 66,000

Full time

9 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Skyeton seeks an Electronics Assembler to build LRUs and PCBAs, inspect and test assemblies, and ensure tight traceability per released drawings, BOMs, and work instructions. You will work closely with Manufacturing, Engineering, and Quality to deliver accurate, documented results in a clean, safe, on-site Fayetteville environment.

Expect hands-on bench work, soldering (through-hole and surface-mount), component identification, and adherence to ES D/FOD controls.

Qualifications

  • High school diploma or equivalent.
  • At least 1 year electronics assembly or related hands-on experience.
  • Ability to follow detailed written instructions and read wiring diagrams.
  • Practical soldering skills and familiarity with electronics handling and ESD precautions.
  • Ability to use small hand tools, magnification, fixtures, and basic electronic test equipment.
  • Strong attention to detail and ability to maintain production, test, and traceability records.
  • Ability to work on-site in Fayetteville, NC and support overtime as needed.

Responsibilities

  • Assemble electronic modules and LRUs, PCBAs, enclosures, connectors, wiring, and fasteners per instructions.
  • Read and follow drawings, BOMs, wiring diagrams, and revision-controlled work instructions.
  • Identify components, polarity, orientation, part numbers, and document lot/serial numbers.
  • Perform through-hole and surface-mount soldering and related tasks within training limits.
  • Use tools and fixtures safely; verify calibration status where required.
  • Apply adhesives, sealants, and conformal coatings as trained and authorized.
  • Conduct in-process checks for solder quality, placement, and hardware installation.
  • Perform continuity, resistance, and functional tests per approved procedures; document results.
  • Load firmware or device configurations when required; record version information.
  • Complete production travelers, inspection/test records, and traceability documents.
  • Identify and report nonconforming materials; perform repairs only with authorization.
  • Maintain ESD controls, clean workstations, and safe handling of components.
  • Communicate shortages, discrepancies, and schedule risks to Plant Manager.

Skills

Precision assembly
Soldering
ESD discipline
Traceability & documentation
Reading drawings & schematics
Attention to detail
Teamwork & communication

Education

High school diploma or equivalent

Tools

Soldering stations
Crimp tools
Torque tools
Digital multimeter

Job description

About the role

The Electronics Assembler LRU and PCB assembles, inspects, and tests line-replaceable units (LRUs), printed circuit board assemblies (PCBAs), and related electronic and electromechanical components for Skyeton unmanned aircraft systems. Reporting to the Plant Manager, this position performs detailed bench assembly using released drawings, bills of material, work instructions, and approved acceptance criteria.

The assembler works closely with Manufacturing, Engineering, and Quality to produce accurate, traceable assemblies, identify defects, and support production schedules. Success requires careful workmanship, dependable follow-through, and strict attention to electrostatic discharge (ESD) protection, foreign object debris (FOD) prevention, and configuration control.

What you’ll do
  • Assemble electronic modules and LRUs, including PCBAs, enclosures, connectors, wiring, fasteners, thermal interface materials, and related hardware according to released instructions.
  • Read and follow assembly drawings, component placement diagrams, bills of material, wiring diagrams, schematics relevant to assigned tasks, and revision-controlled work instructions.
  • Identify components, polarity, orientation, part numbers, and hardware; verify materials and document lot or serial numbers as required before installation.
  • Perform through-hole and surface-mount hand soldering, wire preparation, tinning, connector soldering, and approved touch-up or rework within training and authorization limits.
  • Use soldering stations, magnification, hand tools, crimp tools, torque tools, and assembly fixtures safely and correctly; verify tool calibration status where required.
  • Apply approved adhesives, sealants, staking materials, and conformal coatings when trained and authorized, following handling, mixing, cure, and shelf-life requirements.
  • Perform in-process visual checks for solder quality, component placement, damaged parts, contamination, wire routing, connector seating, and hardware installation; submit assemblies for required inspections.
  • Conduct continuity, resistance, and functional checks using approved procedures and equipment; record results and elevate failures without making unauthorized adjustments.
  • Load approved firmware or device configurations when assigned, using controlled instructions and recording required version information.
  • Complete production travelers, inspection and test records, material transactions, and assembly traceability accurately and promptly.
  • Identify, label, segregate, and report nonconforming material; perform repairs or rework only under approved instructions and required Quality or Engineering authorization.
  • Maintain ESD controls, FOD prevention, clean workstations, organized materials, and safe handling of sensitive electronic components.
  • Communicate shortages, drawing discrepancies, workmanship concerns, and schedule risks to the Plant Manager; support root-cause investigations and practical process improvements.
  • Follow safety, PPE, chemical handling, security, and information-protection requirements; perform other related manufacturing duties as assigned.
Qualifications
  • High school diploma or equivalent.
  • At least one year of electronics assembly, PCB assembly, soldering, avionics assembly, or closely related hands-on experience, or an equivalent combination of relevant technical training and practical experience.
  • Ability to follow detailed written instructions and interpret assembly drawings, component identifiers, bills of material, and basic wiring diagrams.
  • Practical soldering skills and familiarity with electronic component handling, polarity, ESD precautions, and common electronics assembly defects.
  • Ability to use small hand tools, magnification, assembly fixtures, and basic electronic test equipment, including a digital multimeter.
  • Strong attention to detail and ability to maintain accurate production, test, and traceability records.
  • Ability to communicate concerns clearly, work effectively with others, and maintain consistent quality in a changing production environment.
  • Ability to work on-site in Fayetteville, North Carolina, and support assigned schedules and overtime as business needs require.
Preferred Qualifications
  • Experience assembling aerospace, defense, UAS, avionics, or other high-reliability electronic products.
  • Current or prior IPC J-STD-001 or IPC-A-610 training or certification; experience meeting applicable Class 3 workmanship requirements.
  • Experience with surface-mount components, microscope-assisted soldering, PCB rework, connector assembly, crimping, or cable and harness integration.
  • Experience with LRU enclosure assembly, torque-controlled fastening, thermal materials, staking, conformal coating, or approved cleaning processes.
  • Experience using production travelers, electronic manufacturing records, controlled work instructions, and quality systems in an AS9100 or ISO 9001 environment.
  • Technical certificate, associate degree, military electronics training, or equivalent electronics manufacturing training.
Skills and Competencies
  • Precision assembly and soldering
  • Workmanship and quality awareness
  • Drawing and instruction comprehension
  • ESD and FOD discipline
  • Traceability and documentation
  • Problem identification and escalation
  • Teamwork and continuous improvement
Work Environment and Physical Requirements

Work is performed primarily at an electronics assembly bench within an on-site manufacturing environment. Duties involve prolonged sitting or standing, repetitive hand movements, close visual inspection with magnification, and handling small components. The role may involve soldering fumes, cleaning agents, adhesives, and energized test equipment under established safety controls. Employees must be able to perform detailed bench work, reach, bend, and lift or move materials weighing up to 35 pounds, with or without reasonable accommodation.

Equal Opportunity Statement

Skyeton is an Equal Opportunity Employer. Qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other legally protected characteristic. Reasonable accommodations are available for qualified applicants and employees.

This position may involve access to export-controlled items or technical data. Applicants must meet applicable export-control access requirements. Employment is subject to applicable background, drug-screening, and customer access requirements for the position.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electronics Assembler LRU and PCB
Electronics Assembler LRU and PCB

Skyeton, Inc • Fayetteville (NC)

On-site
USD 42,000 - 56,000
Electrical Engineer
Electrical Engineer

Skyeton • Fayetteville (NC)

On-site
USD 120,000 - 160,000
Paid Time Off (PTO)
401(k) plan with company match
Medical insurance: voluntary health
+3
Sub-Assembly Test Technician
Sub-Assembly Test Technician

Skyeton Inc • Fayetteville (NC)

On-site
USD 55,000 - 75,000
Equal opportunity employer
Aerospace Electronics Assembler – LRU/PCBA Expert
Aerospace Electronics Assembler – LRU/PCBA Expert

Skyeton • Fayetteville (NC)

On-site
USD 42,000 - 66,000
Electrical Technician
Electrical Technician

Skyeton, Inc • North Las Vegas (NV)

On-site
USD 55,000 - 85,000
Electrical Technician
Electrical Technician

Skyeton • North Las Vegas (NV)

On-site
USD 60,000 - 85,000
Quality Assurance Technician
Quality Assurance Technician

Skyeton, Inc • Fayetteville (NC)

On-site
USD 45,000 - 65,000
Paid Time Off (PTO)
401(k) plan with company match
Medical insurance: company-paid
+1
Quality Assurance Technician
Quality Assurance Technician

Skyeton • Fayetteville (NC)

On-site
USD 50,000 - 75,000
Paid Time Off (PTO)
401(k) plan with company match
Medical insurance: company-paid
+2
Electronic Assembly Technician
Electronic Assembly Technician

ULTRAX Aerospace, Inc. • Lake Lotawana (MO)

On-site
USD 38,000 - 52,000
Paid time off
Health insurance
Dental insurance
+2
Assembler Structural II
Assembler Structural II

PRYER Aero • Tulsa (OK)

On-site
USD 38,000 - 54,000