Electro-Mechanical Quality Control Technician 2 - MV retrofit PACS

Siemens Mobility; Wendell (NC); On-site; USD 31,000 - 44,000; Full time

Benefits offered by this job

Health and wellness benefits

Job summary

Siemens is seeking an Electro-Mechanical Quality Control Technician 2 in North Carolina to perform advanced electrical and mechanical inspections of MV/LV breakers and assemblies in a fast‑paced manufacturing site. You will troubleshoot test failures, verify conformance, and support quality investigations.

The ideal candidate has 3+ years in electrical testing/quality roles, reads complex schematics, and can work with limited supervision.

Qualifications

• High school diploma or GED; associate degree, military training, technical certification, or equivalent relevant experience is preferred.
• 3+ years of experience in manufacturing quality, electrical testing, inspection, troubleshooting, maintenance, or a related technical role.
• Demonstrated ability to read and interpret complex technical documentation, electrical schematics, wiring diagrams, mechanical drawings, and work instructions.
• Experience using hand tools, measuring instruments, diagnostic equipment, and electrical test equipment to identify and troubleshoot product issues.
• Strong attention to detail, documentation, communication, problem‑solving skills, and commitment to quality and safety.

Responsibilities

• Independently performing advanced electrical, mechanical, functional, and visual inspections in accordance with approved specifications and procedures.
• Testing and inspecting medium-voltage breakers, low-voltage breaker assemblies, panel assemblies, and hi‑pot units.
• Interpreting complex drawings, wiring diagrams, schematics, bills of material, and test documentation to verify product conformance.
• Operating approved manual and automated inspection and test equipment safely and correctly.
• Performing hi‑pot, continuity, insulation resistance, functional, and other assigned electrical tests in accordance with approved procedures.
• Troubleshooting test failures and product discrepancies, isolating likely causes, and coordinating resolution with Production, Quality, and Engineering.
• Documenting inspection findings, test results, non‑conformances, rework verification, and product release status in applicable business systems.
• Supporting root cause investigations and corrective or preventive actions involving product and process quality.
• Serving as a technical resource for test methods, inspection standards, safe work practices, and product quality requirements.
• Supporting training and mentoring of less‑experienced technicians and reinforcing standardized work.
• Recommending and supporting continuous improvement actions that reduce defects, rework, and testing delays.

Skills

Attention to detail

Documentation

Communication

Problem-solving

Education

High school diploma or GED

Associate degree or technical certification

Tools

Hand tools

Measuring instruments

Electrical test equipment

Job description

Electro-Mechanical Quality Control Technician 2 - MV retrofit PACS

Job ID

521398

Posted since

04-Sep-2026

Organization

Smart Infrastructure

Field of work

Manufacturing

Company

Early Professional

Job type

Full-time

Office/Site only

Employment type

Permanent

Location(s)

• Knightdale - North Carolina - United States of America
• Wendell - North Carolina - United States of America

Here at Siemens, we take pride in enabling sustainable progress through technology. We do this by empowering customers through the combination of the real and digital worlds. Improving how we live, work, and move today and for the next generation. We know that the only way a business thrives is if our people are thriving. That’s why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you?

Transform the everyday with us!

About Smart Infrastructure – Electrification and Automation

Siemens is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability, and internationality.

Siemens Smart Infrastructure, Electrification & Automation (EA) business unit is headquartered in Wendell, NC. The EA Business Unit has a diverse portfolio of products, including, but not limited to, low-voltage MCC, CMR fuse saver, MV switchgear, MV circuit breakers, metering, power monitoring, power quality, and protective relay maintenance and systems of a standard nature.

We are looking for an Electromechanical Quality Control Technician 2 to join our team in Wendell, NC.

The Electromechanical Quality Control Technician 2 is responsible for independently performing advanced electrical, mechanical, functional, and visual inspections of medium-voltage breakers, low-voltage breaker assemblies, panel assemblies, and hi-pot units. This role troubleshoots test failures, verifies product conformance, supports quality investigations, and serves as a technical resource while maintaining Siemens standards for quality, safety, and reliability.

The ideal candidate is an experienced electrical tester or quality technician who can troubleshoot complex issues, interpret technical documentation, and work with limited supervision in a fast‑paced manufacturing environment.

You’ll Make an Impact By:

• Independently performing advanced electrical, mechanical, functional, and visual inspections in accordance with approved specifications and procedures.
• Testing and inspecting medium-voltage breakers, low-voltage breaker assemblies, panel assemblies, and hi‑pot units.
• Interpreting complex drawings, wiring diagrams, schematics, bills of material, and test documentation to verify product conformance.
• Operating approved manual and automated inspection and test equipment safely and correctly.
• Performing hi‑pot, continuity, insulation resistance, functional, and other assigned electrical tests in accordance with approved procedures.
• Troubleshooting test failures and product discrepancies, isolating likely causes, and coordinating resolution with Production, Quality, and Engineering.
• Documenting inspection findings, test results, non‑conformances, rework verification, and product release status in applicable business systems.
• Supporting root cause investigations and corrective or preventive actions involving product and process quality.
• Serving as a technical resource for test methods, inspection standards, safe work practices, and product quality requirements.
• Supporting training and mentoring of less‑experienced technicians and reinforcing standardized work.
• Recommending and supporting continuous improvement actions that reduce defects, rework, and testing delays.

You’ll Win Us Over By Having the Following Qualifications:

Basic Qualifications:

• High school diploma or GED; associate degree, military training, technical certification, or equivalent relevant experience is preferred.
• 3+ years of experience in manufacturing quality, electrical testing, inspection, troubleshooting, maintenance, or a related technical role.
• Demonstrated ability to read and interpret complex technical documentation, electrical schematics, wiring diagrams, mechanical drawings, and work instructions.
• Experience using hand tools, measuring instruments, diagnostic equipment, and electrical test equipment to identify and troubleshoot product issues.
• Strong attention to detail, documentation, communication, problem‑solving skills, and commitment to quality and safety.

Preferred Qualifications:

• Associate degree or technical certification in Electrical Technology, Electronics, Mechatronics, Industrial Technology, or a related field.
<
• Experience testing or troubleshooting medium‑voltage breakers, low‑voltage breakers, switchgear, panel assemblies, or industrial electrical equipment.
• Hands‑on experience with hi‑pot, continuity, insulation resistance, and functional performance testing.
• Experience investigating test failures, documenting non‑conformances, and supporting corrective actions.
• Knowledge of electromechanical components, control circuits, and industrial power distribution equipment.
• Experience using SAP, Office 365, MES, ERP, or a similar business system.
• Working knowledge of electrical safety, lockout/tagout, and calibrated test equipment requirements.
• Experience serving as a technical resource or supporting the training of other technicians.
• Training or certification in Lean Manufacturing, 5S, Root Cause Analysis, or Continuous Improvement methodologies.

You’ll Benefit From
Siemens offers a variety of health and wellness benefits to our employees. Details regarding our benefits can be found here: https://www.benefitsquickstart.com/siemens/index.html
The pay range for this position is 27.35 per hour. The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications and premium geographic location.

Equal Employment Opportunity Statement
Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

EEO is the Law
Applicants and employees are protected from discrimination on the basis of race, color, religion, sex, national origin, or any characteristic protected by Federal or other applicable law.

Reasonable Accommodations
If you require a reasonable accommodation in completing a job application, interviewing, completing any pre‑employment testing, or otherwise participating in the employee selection process, please fill out the accommodations form by clicking on this link Accommodationfor disability form . If you’re unable to complete the form, you can reach out to our AskHR team for support at 1-866-743-6367. Please note our AskHR representatives do not have visibility of application or interview status.

Application Deadline
This role will be posted for a minimum of five (5) days from the original posting date. The posting timeline may change based on applicant volume to ensure we attract and consider a strong and representative candidate pool.

California Privacy Notice
California residents have the right to receive additional notices about their personal information. To learn more, click here .

Equal Employment Opportunity Statement
Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

EEO is the Law
Applicants and employees are protected from discrimination on the basis of race, color, religion, sex, national origin, or any characteristic protected by Federal or other applicable law.

Reasonable Accommodations
If you require a reasonable accommodation in completing a job application, interviewing, completing any pre‑employment testing, or otherwise participating in the employee selection process, please fill out the accommodations form by clicking on this link Accommodationfor disability form . If you’re unable to complete the form, you can reach out to our AskHR team for support at 1-866-743-6367. Please note our AskHR representatives do not have visibility of application or interview status.

Pay Transparency
Siemens follows Pay Transparency laws.

Application Deadline
This role will be posted for a minimum of five (5) days from the original posting date. The posting timeline may change based on applicant volume to ensure we attract and consider a strong and representative candidate pool.

California Privacy Notice
California residents have the right to receive additional notices about their personal information. To learn more, click here .

Criminal History
Qualified applications with arrest or conviction records will be considered foremployment in accordance with applicable local and state laws.

Wendell , North Carolina , United States of America

Raleigh , North Carolina , United States of America

Fort Worth , Texas , United States of America

Grand Prairie , Texas , United States of America