Electrical Engineer I - Production Support

Raycap Inc; Kearny (NJ); On-site; USD 70,000 - 90,000; Full time

Benefits offered by this job

Competitive benefits

Paid Time Off

Tuition Reimbursement

401(k) employer contribution

Job summary

Raycap, Inc. in Kearny, NJ is seeking an Electrical Engineer I for production support focused on testing and verification of switchgear and power distribution equipment.

Embedded with the test team, you will act as the engineering technical lead for electrical testing and provide day-to-day engineering support to wiring and assembly areas. You will resolve technical issues on the production floor, improve test methods and documentation, and ensure products meet drawings, customer requirements,

Qualifications

• Bachelor's degree in Electrical Engineering or Electrical Engineering Technology.
• 0–3 years of experience in electrical manufacturing, testing, or production engineering.
• Ability to read electrical schematics, wiring diagrams, and control drawings.
• Hands-on proficiency with electrical test equipment such as digital multimeters, hi-pot testers, insulation resistance testers, and clamp meters.
• Familiarity with UL 891, UL 508A, NEC, NFPA 70E preferred.
• Proficient with Microsoft Office; AutoCAD Electrical experience a plus.
• Strong written and verbal communication skills.
• Occasional travel to other Raycap facilities or customer sites.

Responsibilities

• Serve as the engineering technical lead for electrical test of switchgear and switchboard lineups, including dielectric (hi-pot), insulation resistance, continuity/point-to-point, and functional/operational testing
• Develop, and improve test procedures, test data sheets, and test reports; ensure test results are complete, accurate, and traceable
• Read and interpret schematics, wiring diagrams, one‑line diagrams, and control circuit drawings to support testing and troubleshooting, including CT/VT secondary circuits, breaker auxiliary and control circuits, metering, and relaying
• Troubleshoot wiring, component, and functional failures found during test; identify root cause and drive corrective action with the wiring, assembly, and design teams
• Provide engineering support to the wiring and electrical assembly areas on drawing interpretation, wire sizing and routing, terminations, and workmanship standards
• Review drawings and bills of material for manufacturability and testability; provide feedback to Design Engineering and initiate drawing change requests as needed
• Support first‑article builds and new product introductions from a production and test standpoint
• Support UL 891 and UL 508A compliance on the production floor, including component substitution reviews, labeling, and workmanship requirements; support UL field inspections
• Establish and enforce safe electrical work practices in the test area in accordance with NFPA 70E and company safety policies, including test area setup, barriers, PPE, and energization procedures
• Train and mentor test technicians and wiring personnel on test methods, drawing interpretation, and quality requirements
• Participate in nonconformance reviews and continuous improvement activities to reduce rework, test failures, and cycle time

Skills

Read electrical schematics

Electrical testing

Low-voltage distribution

Communication skills

Travel readiness

Education

Bachelor's degree in Electrical Engineering or Electrical Engineering Technology

Tools

AutoCAD Electrical

Microsoft Office

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Electrical Engineer I - Production Support

Full-time Regular Kearny, NJ, US

3 days ago Requisition ID: 1722

Job Summary

The Electrical Engineer I is a production support–focused engineering position supporting the manufacture of switchgear, switchboards, and power distribution equipment. Embedded with the test team, this position serves as the engineering technical lead for electrical testing and functional verification of switchgear lineups and provides day-to-day engineering support to the wiring and electrical assembly areas. Working closely with Production, Quality, and Design Engineering, the Electrical Engineer I resolves technical issues on the production floor, improves test methods and documentation, and helps ensure products are built and tested to drawings, customer requirements, and applicable UL standards. This position is for an individual with a degree in Electrical Engineering or Electrical Engineering Technology and hands‑on experience testing and troubleshooting electrical equipment.

Primary Job Responsibilities

• Serve as the engineering technical lead for electrical test of switchgear and switchboard lineups, including dielectric (hi-pot), insulation resistance, continuity/point‑to‑point, and functional/operational testing
• Develop, and improve test procedures, test data sheets, and test reports; ensure test results are complete, accurate, and traceable
• Read and interpret schematics, wiring diagrams, one‑line diagrams, and control circuit drawings to support testing and troubleshooting, including CT/VT secondary circuits, breaker auxiliary and control circuits, metering, and relaying
• Troubleshoot wiring, component, and functional failures found during test; identify root cause and drive corrective action with the wiring, assembly, and design teams
• Provide engineering support to the wiring and electrical assembly areas on drawing interpretation, wire sizing and routing, terminations, and workmanship standards
• Review drawings and bills of material for manufacturability and testability; provide feedback to Design Engineering and initiate drawing change requests as needed
• Support first‑article builds and new product introductions from a production and test standpoint
• Support UL 891 and UL 508A compliance on the production floor, including component substitution reviews, labeling, and workmanship requirements; support UL field inspections
• Establish and enforce safe electrical work practices in the test area in accordance with NFPA 70E and company safety policies, including test area setup, barriers, PPE, and energization procedures
• Train and mentor test technicians and wiring personnel on test methods, drawing interpretation, and quality requirements
• Participate in nonconformance reviews and continuous improvement activities to reduce rework, test failures, and cycle time

Job Requirements

• Bachelor’s degree in Electrical Engineering or Electrical Engineering Technology
• 0–3 years of experience in electrical manufacturing, testing, or production engineering; experience with switchgear, switchboards, panelboards, or industrial control panels preferred
• Ability to read and interpret electrical schematics, wiring diagrams, one‑line diagrams, and mechanical assembly drawings
• Hands‑on proficiency with electrical test equipment such as digital multimeters, hi‑pot/dielectric testers, insulation resistance testers, and clamp meters; experience with breaker or relay test sets a plus
• Working knowledge of low‑voltage power distribution equipment and components, including circuit breakers, CTs/VTs, control power transformers, metering, and relays
• Familiarity with UL 891, UL 508A, the NEC, and NFPA 70E preferred
• Proficient with Microsoft Office; experience with AutoCAD Electrical or similar electrical CAD software a plus
• Strong written and verbal communication skills; able to work effectively with technicians, assemblers, engineers, and quality personnel
• Occasional travel to the other Raycap facilities or customer sites may be required

Physical Demands

• The employee is frequently required to stand and walk on the production floor for extended periods; use hands to finger, handle or manipulate objects, tools, test equipment, keyboards or controls
• Reach with hands and arms; and talk or hear, including in a noisy manufacturing environment
• Occasionally required to sit; and may also be required to stoop, kneel, crouch, crawl, or climb to access equipment sections
• Visual acuity sufficient to read drawings and identify wire markings and colors
• Must be able to wear required PPE, including arc‑rated clothing and voltage‑rated gloves, and work near energized test equipment following established safety procedures
• Must occasionally lift and/or move up to 50 pounds

Why Choose Us?

Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer:

• A very competitive benefit package
• Paid Time Off
• Tuition Reimbursement
• A generous 401(k) employer contribution

Raycap is an Equal Opportunity / Aff…? All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, gender identity, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications.