Dry Etch Process Development Engineer - Sr. Staff Req# 2718

Skywater Technology

Kissimmee (FL)

On-site

USD 120,000 - 160,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

SkyWater Technology, Inc. seeks a Dry Etch Engineer at our Florida Advanced Packaging site to develop, optimize, and integrate plasma etch processes for packaging, MEMS, and photonics.

You will work with cross-functional teams to meet CD, selectivity, and uniformity targets while leveraging data-driven methods. The role requires 7+ years of semiconductor processing, strong knowledge of etch systems (ICP/RIE/DRIE), and the ability to drive DOE/Six Sigma projects.

Qualifications

  • BS in Electrical, Chemical, Materials, Mechanical, Physics, or related technical discipline.

Responsibilities

  • Develop, optimize, and integrate dry etch processes in a high-volume or advanced R&D semiconductor environment.
  • Design and qualify robust plasma etch recipes for packaging, MEMS, photonics, and specialty devices.
  • Optimize process parameters (gas chemistry, pressure, power, temperature, bias, time, hardware) for etch profiles, selectivity, CD control, and uniformity.
  • Develop process windows and documentation (etch specs, operating conditions, recipes).
  • Support integration with lithography, deposition, CMP, metallization, and dielectric fabrication steps.
  • Utilize metrology tools (CD-SEM, optical microscopy, profilometry, ellipsometry, XSEM, defect inspection) to monitor performance.
  • Conduct DOE to determine key sensitivities and robust manufacturing windows.
  • Analyze process and tool data to identify variation sources and improvement opportunities.
  • Monitor SPC charts, inline metrology, end-of-line data for trends and excursions.
  • Investigate defects, profile variations, microloading, CD drift, uniformity, yield loss; drive improvements.
  • Collaborate with equipment engineering to troubleshoot tool performance and stability.
  • Support new product introductions, customer-specific process development, and tech transfer.
  • Translate patterning requirements into manufacturable etch solutions; correlate with device performance.
  • Develop process control strategies and inline metrology recommendations.
  • Prepare technical reports and development summaries for customers and stakeholders.
  • Lead dry-etch improvement projects in cross-functional teams.

Skills

Plasma etch fundamentals
Data-driven decisions
Cross-functional collaboration
DOE / SPC / Six Sigma
Strong communication
Independent worker

Education

BS in Electrical/Chemical/Materials/Mechanical/Physics or related
MS or PhD preferred

Tools

CD-SEM
XSEM
Ellipsometry
Profilometry
Defect inspection systems

Job description

Position Summary

We are seeking a dedicated, technically strong, and highly motivated Dry Etch Engineer to support our Florida Advanced Packaging site. In this role, you will be responsible for the development, optimization, integration, and continuous improvement of plasma etch processes used in advanced semiconductor packaging, MEMS, and photonic device manufacturing.

The Dry Etch Engineer will collaborate closely with process engineers, equipment engineers, integration teams, and foundry customers to enable robust, manufacturable etch processes that meet critical dimension, profile, selectivity, defectivity, and uniformity requirements. The ideal candidate will have solid semiconductor fab experience, excellent analytical and problem-solving skills, and the ability to leverage data-driven methodologies to improve process capability, yield, and device performance.

Strong communication skills are required to effectively convey technical concepts, results, and recommendations to customers, colleagues, and leadership teams.

Responsibilities
  • Develop, optimize, and integrate dry etch processes in a high-volume manufacturing or advanced R&D semiconductor environment.
  • Design and qualify robust plasma etch recipes for advanced packaging, MEMS, photonics, and specialty device applications.
  • Optimize process parameters including gas chemistry, pressure, power, temperature, bias, time, and hardware configurations to achieve required etch profiles, selectivity, CD control, and uniformity.
  • Develop process windows and associated documentation, including etch specifications, operating conditions, and process recipes.
  • Support integration of etch processes with lithography, deposition, CMP, metallization, and dielectric fabrication steps.
  • Utilize metrology tools such as CD-SEM, optical microscopy, profilometry, ellipsometry, XSEM, and defect inspection systems to characterize and monitor etch process performance.
  • Conduct Design of Experiments (DOE) to determine key process sensitivities and establish robust manufacturing windows.
  • Analyze process and tool data to identify sources of variation, process marginalities, and continuous improvement opportunities.
  • Monitor SPC charts, inline metrology, and end-of-line data to detect trends, abnormalities, and excursions.
  • Investigate etch defects, profile variations, microloading effects, CD drift, uniformity issues, and yield loss using structured problem-solving methodologies.
  • Partner with equipment engineering to troubleshoot tool performance, improve chamber stability, and ensure hardware is capable of meeting process requirements.
  • Support new product introduction, customer-specific process development, and technology transfer activities.
  • Collaborate with device, integration, and design teams to translate patterning and profile requirements into manufacturable etch process solutions.
  • Correlate etch performance with downstream process behavior, electrical test results, and final device performance.
  • Develop process control strategies and recommend appropriate inline metrology and monitoring systems for dry etch processes.
  • Prepare technical reports, presentations, process documentation, and development summaries for customers and internal stakeholders.
  • Participate in cross-functional problem-solving teams and lead dry-etch-related improvement projects.
Required Qualifications
Education
  • BS degree in Electrical Engineering, Chemical Engineering, Materials Science, Mechanical Engineering, Physics, or a related technical discipline.
  • MS or PhD preferred.
Experience and Skills
  • 7 plus years of hands‑on semiconductor processing experience with a strong understanding of plasma etch fundamentals and equipment.
  • Experience with dielectric, metal, and/or silicon etch processes across a variety of plasma platforms (e.g., ICP, RIE, DRIE, high‑density plasma).
  • Understanding of etch process parameters including gas chemistry, selectivity, anisotropy, microloading, aspect ratio effects, CD control, profile tuning, and defectivity.
  • Experience developing or optimizing etch processes for advanced or non‑standard requirements, such as high‑aspect‑ratio features, TSVs, vias, trenches, microstructures, or large‑area patterning.
  • Strong understanding of interactions between etch and related processes including lithography, deposition, CMP, metallization, and wafer bonding.
  • Familiarity with CD-SEM, optical metrology, profilometry, XSEM, ellipsometry, and defect inspection techniques.
  • Knowledge of DOE, SPC, Six Sigma, statistical analysis, and process capability concepts.
  • Demonstrated experience analyzing data to identify root causes, process sensitivities, and improvement paths.
  • Clear, structured problem‑solving approach with a focus on data‑driven decisions and creative technical solutions.
  • Strong written and verbal communication skills.
  • Ability to work independently while contributing effectively to cross‑functional teams.
U.S. Person Required:

This position requires compliance with the International Traffic in Arms Regulations (ITAR). All accepted applicants must be U.S. Persons. ITAR defines a U.S. Person as U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee.

#sw2

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Dry Etch Process Development Engineer - Sr. Staff
Dry Etch Process Development Engineer - Sr. Staff

SkyWater Technology • Kissimmee (FL)

On-site
USD 114,000 - 171,000
Wet Etch Process Devleopment Engineer - Sr. Staff Req# 2713
Wet Etch Process Devleopment Engineer - Sr. Staff Req# 2713

Skywater Technology • Kissimmee (FL)

On-site
USD 90,000 - 130,000
Dry/Plasma Etch Process Development Engineer (SM1)
Dry/Plasma Etch Process Development Engineer (SM1)

Texas Instruments • Sherman (TX)

On-site
USD 120,000 - 180,000
Dry/Plasma Etch Process Development Engineer (SM1)
Dry/Plasma Etch Process Development Engineer (SM1)

Texas Instruments Incorporated • Sherman (TX)

On-site
USD 110,000 - 150,000
Dry/Plasma Etch Process Development Engineer (R&D)
Dry/Plasma Etch Process Development Engineer (R&D)

Texas Instruments Incorporated • Dallas (TX)

On-site
USD 120,000 - 180,000
Dry/Plasma Etch Process Development Engineer (R&D)
Dry/Plasma Etch Process Development Engineer (R&D)

Texas Instruments Incorporated • Dallas (TX)

On-site
USD 100,000 - 160,000
Module Development Engineer - LTD Dry Etch
Module Development Engineer - LTD Dry Etch

Intel Corporation • Hillsboro (OR)

On-site
USD 120,000 - 150,000
Lead Plasma Etch Process Development Engineer
Lead Plasma Etch Process Development Engineer

Texas Instruments Incorporated • Sherman (TX)

Hybrid
USD 110,000 - 150,000
Dry Etch Process Architect for Advanced Packaging
Dry Etch Process Architect for Advanced Packaging

Skywater Technology • Kissimmee (FL)

On-site
USD 120,000 - 160,000
Process Engineer–Wet and Dry Etch
Process Engineer–Wet and Dry Etch

Avicena Tech • Sunnyvale (CA)

On-site
USD 110,000 - 180,000