Deburrer

Aerotek

Daytona Beach (FL)

On-site

USD 23,000 - 26,000

Full time

7 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Aerotek is seeking a Deburrer for a contract-to-hire role based in Daytona Beach, FL. The candidate will deburr, finish, and polish metal components, ensuring compliance with surface finish and quality standards.

The role involves hands-on use of hand and power tools, inspection of parts, and adherence to safety practices in a climate-controlled manufacturing environment. The position requires attention to detail, ability to read instructions and follow scribe lines, and experience with

Qualifications

  • Experience in deburring, finishing, and polishing metal parts.
  • Ability to read basic instructions and follow scribe lines.
  • Familiarity with measurement tools and inspection practices.

Responsibilities

  • Blend and deburr metal parts by grinding, filing, sanding, and polishing.
  • Inspect metal surfaces for dents, scratches, burrs, or breaks.
  • Prepare surfaces to meet finish specifications.
  • Polish surfaces to a uniform appearance.
  • Inspect completed work to ensure specifications are met.
  • Use hand and power tools safely for deburring and finishing.

Skills

Deburring
Hand tools
Quality inspection
Manufacturing experience
Reading specs
Safety awareness

Tools

Air tools
Ultrasonic equipment
Microscope
Laser engraver
Measuring instruments

Job description

Job Title: Deburrer
Job Description

The deburrer prepares and finishes metal components by removing imperfections, smoothing surfaces, and ensuring parts meet specified quality standards. This role involves hands‑on work with a variety of tools to blend, grind, file, sand, and polish metal parts, followed by careful inspection to confirm accuracy and finish quality.

Responsibilities
  • Blend and deburr metal parts by grinding, filing, sanding, and polishing to achieve the required surface finish.
  • Examine metal surfaces to detect defects such as dents, scratches, burrs, or breaks and take corrective action as needed.
  • Prepare surfaces and edges of parts to meet specified finish requirements and quality standards.
  • Polish metal surfaces to a uniform and consistent appearance.
  • Inspect completed work to ensure all defects are removed and specifications are met.
  • Scribe parts and blend material accurately to the scribe lines.
  • Clean parts using an ultrasonic tank to remove debris and contaminants.
  • Install hardware into components according to instructions and specifications.
  • Mark parts using a laser engraver, following identification and labeling requirements.
  • Use hand and power tools safely and effectively for deburring, grinding, sanding, buffing, and finishing tasks.
  • Handle general labor tasks related to metal finishing and deburring as needed.
  • Work near moving mechanical parts and in environments with vibration, fumes, or airborne particles while following all safety procedures.
Essential Skills
  • Hands‑on experience with deburring, metal finishing, and polishing processes.
  • Ability to use hand tools and power tools for grinding, sanding, buffing, and finishing metal parts.
  • Strong attention to detail and quality inspection skills to identify and correct surface defects.
  • Mechanical aptitude and prior manufacturing experience working with metal components.
  • Ability to read and follow basic instructions, including working to scribe lines and marked specifications.
  • Comfort working near moving mechanical parts and in environments with vibration, fumes, or airborne particles while adhering to safety guidelines.
Additional Skills & Qualifications
  • Prior use of air tools for deburring and finishing is preferred.
  • Experience using measuring instruments and inspection tools is a plus.
  • Familiarity with blueprints or part drawings for understanding finishing requirements.
  • Experience working under a microscope for detailed inspection and finishing is beneficial.
  • Background in general labor within a manufacturing or metal finishing environment.
Why Work Here?

You join a stable, climate‑controlled manufacturing environment where craftsmanship and attention to detail are valued. The workplace offers the opportunity to develop and refine hands‑on technical skills with metal finishing and deburring, supported by clear processes and quality standards. You work in a setting that emphasizes safety, consistency, and pride in producing high‑quality components.

Work Environment

The role is based across two climate‑controlled buildings, providing a comfortable and consistent temperature while working. You regularly work near moving mechanical parts and may be exposed to hand vibration, fumes, or airborne particles, with appropriate safety practices in place. The environment is a production and manufacturing setting that uses hand tools, power tools, air tools, ultrasonic cleaning equipment, microscopes, and laser engraving equipment to complete metal finishing and deburring tasks.

Job Type & Location

This is a Contract to Hire position based out of Daytona Beach, FL.

Pay and Benefits

The pay range for this position is $17.00 - $19.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job‑related factors.

Eligibility requirements apply to some benefits and may depend on your jobclassification and length of employment. Benefits are subject to change and may besubject to specific elections, plan, or program terms. If eligible, the benefitsavailable for this temporary role may include the following:Medical, dental & visionCritical Illness, Accident, and Hospital401(k) Retirement Plan Pre‑tax and Roth post‑tax contributions availableLife Insurance (Voluntary Life & AD&D for the employee and dependents)Short and long‑term disabilityHealth Spending Account (HSA)Transportation benefitsEmployee Assistance ProgramTime Off/Leave (PTO, Vacation or Sick Leave)

Job Type & Location

This is a Contract to Hire position based out of Daytona Beach, FL.

Application Deadline

This position is anticipated to close on Nov 26, 2026.

Workplace Type

This is a fully onsite position in Daytona Beach,FL.

About Aerotek

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Deburring Technician-Swing
Deburring Technician-Swing

Aerotek • Kent (WA)

On-site
USD 28,000 - 30,000
Medical, dental & vision benefits
401(k) retirement plan with company-m0
Paid time off and holidays
Deburrer
Deburrer

Aerotek • Burbank (CA)

On-site
USD 23,000 - 32,000
Weekly pay
Medical, dental & vision
401(k) Retirement Plan
+2
Deburr Operator
Deburr Operator

Aerotek • Roscoe Township (IL)

On-site
USD 21,000 - 34,000
Medical benefits
Dental & vision
401(k) retirement plan
+3
Metal Finisher
Metal Finisher

Aerotek • Le Sueur (MN)

On-site
USD 26,000 - 28,000
Weekly pay
Medical, dental & vision benefits
Life insurance
+3
Assembler
Assembler

Aerotek • Springville (AL)

On-site
USD 30,000 - 34,000
Weekly pay
Medical, dental & vision
401(k) Retirement Plan
+2
Grinder Operator
Grinder Operator

Aerotek • Rancho Cucamonga (CA)

On-site
USD 30,000 - 31,000
Assembler $17-$21.40
Assembler $17-$21.40

Aerotek • Bedford

On-site
USD 23,000 - 29,000
Weekly pay
Medical insurance
Dental insurance
+4
Shipping and Receiving Clerk
Shipping and Receiving Clerk

Talentify • Compton (CA)

On-site
USD 23,000 - 28,000
Machine Operator
Machine Operator

Aerotek • Santa Fe (NM)

On-site
USD 25,000 - 62,000
Medical, dental & vision
401(k) Retirement Plan
Life Insurance
1st Shift Manufacturing Technician
1st Shift Manufacturing Technician

Aerotek • Tulsa (OK)

On-site
USD 23,000 - 32,000
Medical, dental & vision
401(k) plan
Weekly pay