CNC Production Technician — Turning & Milling Cells

JWC Machine and Fab; Mobile (AL); On-site; USD 36,000 - 48,000; Full time

Benefits offered by this job

Health insurance — 100% company paid

401(k) with 4% company match

Annual performance bonus

Relocation assistance available

Job summary

JWC Machine and Fab in Mobile, AL is seeking a CNC Operator to support turning and milling operations. You will load/unload machines, run parts per setup sheets, and perform in-process inspections with calipers and micrometers.

You will monitor machines for issues, report wear or defects, and assist with setups while maintaining a clean, safe work area. Must have 1+ year of experience and be reliable.

Qualifications

• 1+ year in a CNC machining or manufacturing environment preferred.
• Able to read basic engineering drawings and understand tolerances.
• Comfort with calipers and micrometers for measurement.
• Keen eye for detail; able to spot nonconforming parts.
• Reliable, punctual, focused during repetitive production tasks.
• Note: NIMS credentials, technical school training, or SkillsUSA machining experience encouraged.

Responsibilities

• Load, unload, and cycle CNC mills and lathes following setup sheets and job travelers.
• Conduct basic in-process checks using calipers, micrometers, and go/no-go gauges.
• Monitor machines for abnormal noise, vibration, or quality drift; escalate immediately.
• Report tooling wear, broken tools, and part issues to a lead machinist or supervisor.
• Assist with setups: work-holding, tooling changes, and material staging.
• Maintain a clean, organized work area throughout the shift.
• Accurately track part counts and complete production documentation.
• Follow all shop safety policies and wear required PPE at all times.

Skills

Reading engineering drawings

Attention to detail

Strong measurement skills

Willingness to learn

Punctual and reliable

Tools

G-code programming

M-code programming

CNC setup & changeover

CNC tooling

GD&T

Calipers & micrometers

Tape measure reading

Manual machining

Precision measurement & hand metrology

Job description

A day in the lifeYou arrive on the floor, review setup sheets and job travelers, then stage material for a CNC lathe or vertical mill. You load parts, cycle the machine, and verify key dimensions with calipers and micrometers. As parts run, you listen for unusual sounds or vibration, watch chip load and finishes, and flag any tool wear or broken inserts to the lead machinist right away. Between runs, you help with work-holding swaps and tooling changes, keep your cell clean and organized, track part counts, and record production notes. PPE stays on, safety comes first, and every detail matters.About JWC Machine and FabBased in Mobile, AL, JWC is a precision CNC shop known for tight-tolerance industrial components. Our team tackles a wide range of materials and geometries—from repeat production to complex, large-format work. We grow carefully, invest in craftsmanship, and treat every hire as mission-critical.The roleThis CNC Operator position supports both turning and milling operations. It is ideal for someone with foundational machining exposure who wants to progress toward full machinist capabilities while learning shoulder-to-shoulder with experienced pros.Core responsibilitiesLoad, unload, and cycle CNC mills and lathes following setup sheets and job travelersConduct basic in-process checks using calipers, micrometers, and go/no-go gaugesMonitor machines for abnormal noise, vibration, or quality drift; escalate immediatelyReport tooling wear, broken tools, and part issues to a lead machinist or supervisorAssist with setups: work-holding, tooling changes, and material stagingMaintain a clean, organized work area throughout the shiftAccurately track part counts and complete production documentationFollow all shop safety policies and wear required PPE at all timesQualifications1+ year in a CNC machining or manufacturing environment preferredAble to read basic engineering drawings and understand tolerancesComfort with calipers and micrometers for measurementStrong desire to learn; clear path to CNC MachinistKeen eye for detail; able to spot nonconforming partsReliable, punctual, focused during repetitive production tasksAble to lift up to 50 lbs and stand for extended periodsNote: Candidates with NIMS credentials, technical school training, or SkillsUSA machining competition experience are strongly encouraged to apply.Compensation & BenefitsCompetitive pay based on experience and qualifications401(k) with 4% company matchHealth insurance — 100% company paidAnnual performance bonusRelocation assistance available for the right candidateTools and skills you will useGD&TCNC ToolingCNC ProgrammingG-CodeTape Measure ReadingM-CodeCNC Machine Setup & ChangeoverPrecision Measurement & Hand MetrologyManual Machining Skills*JWC Machine and Fab is an equal opportunity employer. We evaluate all candidates based on skill, experience, and demonstrated ability.