CNC Plasma & Oxy-Fuel Operator

Owen Industries; Carter Lake (IA); Vor Ort; USD 42.000 - 48.000; Vollzeit

Benefits dieser Stelle

Health, Dental & Vision insurance

Life/AD&D and Disability coverage

401(k) with company match

PTO and 9 paid holidays

Wellness program with incentives

Opportunities for growth

Zusammenfassung

Owen Industries’ PVS Structures division in Carter Lake, IA, is hiring a MG Burn Table Operator for the CNC plasma & oxy-fuel line. You will own machine setup, review drawings, and ensure accurate cuts for complex steel components.

The role features a 4-day work week (Mon–Thu) with Fridays off, early afternoon home, and comprehensive benefits including health, dental, vision, and a 401(k) plan. Prior CNC burn table experience strongly preferred.

Qualifikationen

• Ability to read structural steel drawings and cut lists.
• Experience with CNC plasma and oxy-fuel cutting.
• Proficiency with precision measuring tools.
• Knowledge of safety procedures and LOTO.
• Ability to train and direct helpers.

Aufgaben

• Set up and operate the MG CNC burn table using plasma and oxy-fuel cutting.
• Review work orders, cut lists, drawings, nesting layouts, and CNC programs before starting.
• Verify material type, thickness, and dimensions prior to cutting.
• Load and secure plate material on the burn table with handling equipment.
• Select torch settings and verify CNC program loaded and correct.
• Monitor machine and adjust for cut quality and efficiency.
• Inspect parts for dimensional accuracy and maintain records.

Kenntnisse

Reading drawings

CNC programs

Measuring tools

Safety procedures

Machine setup & operation

Tools

MG CNC burn table

Torch settings

Jobbeschreibung

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

CNC Plasma & Oxy-Fuel Operator

Manual Labor PVS Structures SF, Carter Lake, IA, US

3 days ago Requisition ID: 1201

Salary Range: $20.00 To $23.00 Hourly

MG Burn Table Operator – CNC Plasma & Oxy-Fuel | $20–$23/hr | 4-Day Work Week

PVS Structures (Owen Industries) – Carter Lake, IA (Near Downtown Omaha) | Mon–Thu, 5:30 AM – 4:00 PM

Cut Steel With Precision. Own the Machine. Go Home by Early Afternoon.

At PVS Structures, our burn table operators are the first step in turning raw steel plate into precision-cut components for complex structural steel fabrication projects. We're hiring an MG Burn Table Operator for 1st shift — someone who knows CNC plasma and oxy-fuel cutting, takes ownership of their machine, and holds themselves to a high standard on every job.

This is a 4-day work week with every Friday off and a consistent schedule that has you home by early afternoon every day.

The Details

• Hours: Mon–Thu, 5:30 AM – 4:00 PM
• Schedule: 4-day work week — Fridays always off
• Home by early afternoon every day

What You'll Do

Machine Setup & Operation

• Set up and operate the MG CNC burn table using plasma and oxy-fuel cutting processes
• Review work orders, cut lists, drawings, nesting layouts, and CNC programs before beginning each job
• Verify material type, thickness, dimensions, and heat/plate identification before cutting
• Load, position, and secure plate material on the burn table using appropriate material-handling equipment
• Select appropriate torch, consumables, gases, amperage, speeds, pierce settings, and other parameters for each job
• Verify the correct CNC program and cutting pattern are loaded and confirmed before starting
• Monitor the machine during operation and make real-time adjustments to maintain cut quality and production efficiency
• Operate both plasma and oxy-fuel cutting equipment as trained and qualified

Quality Inspection & Documentation

• Inspect cut parts for dimensional accuracy, edge quality, slag, dross, bevel, and warping
• Use precision measuring tools including tape measures, squares, and calipers
• Identify, mark, and properly segregate nonconforming material and communicate quality issues to supervision
• Maintain accurate production records including material used, parts produced, scrap, and downtime

Maintenance & Safety

• Perform routine cleaning and preventive maintenance on the burn table and associated equipment
• Inspect torches, hoses, regulators, leads, and consumables for wear; replace consumables and perform authorized operator-level maintenance
• Maintain proper gas pressures and follow established procedures for oxygen, fuel gas, and plasma systems
• Monitor consumable usage and notify supervision when supplies need replenishment
• Follow all PPE requirements, hot-work procedures, fire prevention, and LOTO procedures without exception
• Maintain a clean, organized, and safe work area around the burn table at all times
• Communicate machine problems, quality concerns, and production delays to supervision promptly
• Provide training and direction to MG Helpers and other employees as assigned

What We're Looking For

• Ability to read and interpret structural steel drawings, cut lists, nesting layouts, and CNC programs
• Working knowledge of cutting parameters — amperage, speeds, pierce settings, gas pressures — and how to adjust them to maintain cut quality
• Proficiency with precision measuring tools — tape measures, squares, calipers
• Knowledge of safe handling procedures for oxygen, fuel gas, and plasma systems
• Familiarity with hot-work procedures, LOTO, and fire prevention practices
• Ability to operate overhead cranes, forklifts, or other material-handling equipment as required
• Strong attention to detail in production documentation and record keeping
• Reliable attendance and punctuality — your crew and production schedule count on you
• Ability to train and direct helpers and entry-level employees effectively

What's In It For You

• $20–$23/hr depending on experience
• 4-day work week — Mon through Thu, every week
• Home by early afternoon every day
• Health, Dental & Vision insurance
• Life/AD&D and Disability coverage
• 401(k) with company match
• PTO and 9 paid holidays — accrual begins immediately
• Wellness program with premium incentives
• Opportunities for growth and advancement within Owen Industries
• Clean, safe, and organized work environment

Benefits begin the 1st of the month after 30 days of employment.

Why PVS Structures?

PVS Structures is part of Owen Industries, a decades-long leader in the structural steel industry. We work on complex, high-profile fabrication projects that demand precision and quality from the very first cut. You'll work alongside experienced fabricators and welders in a team-first environment where safety is non-negotiable, your expertise is valued, and there's real room to grow.

The technical discipline, safety awareness, and mission-focused work ethic you developed in service translate directly to this role. PVS Structures and Owen Industries are proud to be Veteran-friendly employers committed to supporting those who have served.

Owen is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions are based on qualifications, merit, and business needs — without regard to race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.