CNC Machinist - Milling

ADP, Inc.; Westfield (MA); On-site; USD 36,000 - 51,000; Full time

Job summary

ADP, Inc. is seeking a CNC Machinist - Milling in Westfield, MA. You will set up and run CNC milling operations, inspect finished parts, and make adjustments to ensure high quality.

The role requires experience in aerospace, familiarity with materials, and the ability to interpret blueprints and operation sheets. Key duties include following safety protocols, performing precise measurements, and maintaining equipment and documentation in compliance with AS9100/ISO9001 standards.

Qualifications

• High School Diploma or Equivalent; Tech School preferred.
• 3+ yrs Experience operating a CNC Milling Machine.
• Experience in the Aerospace industry.
• Knowledge of various metals, alloys, and other materials to optimize speeds and feeds.
• Basic computer skills
• Ability to use inspection tools such as micrometers, calipers, indicators.
• Ability to set up on 3, 4, and 5 Axis machines.
• Ability to read and interpret basic blueprints and operation sheets.
• Ability to communicate effectively in writing and verbally.
• Ability to follow setup instructions and operate machine controls.
• Ability to troubleshoot machines.
• Ability to perform precision work on parts with tight tolerances.
• Ability to work overtime, including weekends.

Responsibilities

• Operate a CNC Milling Machine.
• Perform precision work on parts with close tolerances.
• Follow Ops sheets and instructions for product specs.
• Maintain documentation per AS9100/ISO9001.
• Conduct daily maintenance and keep work area clean.
• Verify dimensions per operation sheet.
• Complete production paperwork and inspection procedures.
• Troubleshoot processes and adjust controls.

Skills

CNC Milling Experience

Blueprint Reading

Numeric/Measurement Skills

Communication Skills

Basic Computer Skills

Education

High School Diploma or Equivalent

Tech School preferred

Tools

CNC Milling Machine

Micrometers

Calipers

Indicators

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

CNC Machinist - Milling

Full Time Direct Tell Tool Operations, Westfield, MA, US

Salary Range: $26.10 To $37.00 Hourly

Job Position Summary:You will be responsible to produce a quality part by setting up and running parts, then being able to inspect your work and if needed make adjustments.

You must have:

• A high School Diploma or Equivalent. Tech School preferred.
• 3+ yrs Experience operating a CNC Milling Machine
• Experience in the Aerospace industry.
• Knowledge of various metals, alloys, and other materials to optimize proper speeds and feeds.
• Basic computer skills
• The ability to use inspection tools such as micrometers, calipers, indicators.
• The ability to do basic set ups on 3, 4, and 5 Axis Machines
• The ability to read and interpret basic blueprints and company operation sheets.
• The ability to effectively communicate both written and verbally.
• The ability to follow set up instructions, set up, and operate machine controls.
• The ability to Troubleshoot machines.
• Skills in performing precision work on parts with close tolerance between interrelated surfaces.
• The ability to work overtime, including weekends

In your role, you will:

• Follow Safety culture and wear PPE when required.
• Operate a CNC Milling Machine.
• Perform precision work on parts with close tolerance between interrelated surfaces.
• Follows Ops sheets and written or verbal instructions for product specifications.
• Operate within AS9100/ISO9001 requirements to include proper documentation.
• Observes overall operation and performs regular daily maintenance on equipment and work area.
• Verify and visually inspected your work and dimensions per operations sheet to specification.
• Fill out production paperwork and inspection procedures as required.
• Maintain specifications by trouble shooting processes; adjusting controls; replacing worn tools, observing tooling; taking measurements; detecting malfunction.
• Maintain a clean organized work area.

Working Conditions:

• Normal Production environments, subject to high noise levels from operating machines; physical hazards from moving equipment and sharp machine parts; breathing fumes, dust, and mist; skin exposure to oil and cutting fluid; exposure to sharp metal edges, and forklifts.
• May be asked to travel back and forth between Southwick and Westfield facilities.

Physical Requirements:

• Must have ability to read applicable customer documents with or without corrective lenses.
• May have to lift up to thirty (30) pounds at a time, as required.
• Must be able to push, pull, reach overhead, stand, walk, climb stairs, bend and/or sit for long periods of time.

Job Position Summary:You will be responsible to produce a quality part by setting up and running parts, then being able to inspect your work and if needed make adjustments.

You must have:

• A high School Diploma or Equivalent. Tech School preferred.
• 3+ yrs Experience operating a CNC Milling Machine
• Experience in the Aerospace industry.
• Knowledge of various metals, alloys, and other materials to optimize proper speeds and feeds.
• Strong Attention to details
• Basic computer skills
• The ability to use inspection tools such as micrometers, calipers, indicators.
• The ability to do basic set ups on 3, 4, and 5 Axis Machines
• The ability to read and interpret basic blueprints and company operation sheets.
• The ability to effectively communicate both written and verbally.
• Skills in using various machine attachments.
• The ability to follow set up instructions, set up, and operate machine controls.
• The ability to Troubleshoot machines.
• Skills in performing precision work on parts with close tolerance between interrelated surfaces.
• The ability to work overtime, including weekends

In your role, you will:

• Follow Safety culture and wear PPE when required.
• Operate a CNC Milling Machine.
• Perform precision work on parts with close tolerance between interrelated surfaces.
• Follows Ops sheets and written or verbal instructions for product specifications.
• Operate within AS9100/ISO9001 requirements to include proper documentation.
• Observes overall operation and performs regular daily maintenance on equipment and work area.
• Verify and visually inspected your work and dimensions per operations sheet to specification.
• Fill out production paperwork and inspection procedures as required.
• Maintain specifications by trouble shooting processes; adjusting controls; replacing worn tools, observing tooling; taking measurements; detecting malfunction.
• Maintain a clean organized work area.

Working Conditions:

• Normal Production environments, subject to high noise levels from operating machines; physical hazards from moving equipment and sharp machine parts; breathing fumes, dust, and mist; skin exposure to oil and cutting fluid; exposure to sharp metal edges, and forklifts.
• May be asked to travel back and forth between Southwick and Westfield facilities.

Physical Requirements:

• Must have ability to read applicable customer documents with or without corrective lenses.
• May have to lift up to thirty (30) pounds at a time, as required.
• Must be able to push, pull, reach overhead, stand, walk, climb stairs, bend and/or sit for long periods of time.

Second Shift: 3:30pm - 12:00am Monday - Friday, 25% Shift Differential