CNC Machinist

Teraflex

Ogden (UT)

On-site

USD 30,000 - 41,000

Full time

10 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

ReadyLIFT in Ogden, Utah seeks a dependable CNC Machinist to operate CNC mills and lathes, inspect parts, and maintain tooling to meet safety and quality standards.

You will read blueprints, adjust tooling and offsets, monitor tool wear, maintain documentation, and participate in preventive maintenance while contributing to a clean, safe work area.

Swing shift available for extra pay; the ideal candidate is mechanically inclined, detail-oriented, and committed to teamwork and on-time production.

Qualifications

  • Experience in CNC machining and reading blueprints.
  • Able to read G-code and M-code and set up tooling and offsets.
  • Proficient in using measuring instruments for dimensional inspection.
  • Strong attention to detail and commitment to quality standards.
  • Able to follow written and verbal instructions and work as part of a team.
  • Demonstrated ability to lift 40–60 pounds and work in a manufacturing setting.
  • Must pass a dimensional inspection test.

Responsibilities

  • Safely operate CNC mills and lathes following safety procedures.
  • Meet production and quality goals while maintaining specs.
  • Read blueprints, drawings, and dimensions to verify parts.
  • Change tooling, touch off, and adjust offsets as needed.
  • Inspect finished components and document measurements.
  • Maintain coolant levels and perform PMs on CNC equipment.
  • Keep work area clean and organized; report issues to Shift Lead.

Skills

CNC machining
G-code/M-code
Blueprint reading
Dimensional inspection
Tooling setup
Measurement tools
Quality records
Attention to detail
Teamwork

Tools

Calipers
Micrometers
CMM

Job description

CNC MachinistReadyLIFTOgden, UtahAbout ReadyLIFTReadyLIFT is a leading automotive aftermarket brand specializing in innovative suspension systems and lift solutions for trucks and SUVs. As part of a growing family of automotive aftermarket brands, ReadyLIFT is committed to producing high-quality products that deliver performance, durability, and an improved driving experience.Our Ogden manufacturing team plays an important role in producing the precision components that go into our suspension products. We are looking for dependable, mechanically skilled individuals who take pride in producing quality work.Position SummaryThe CNC Machinist is a production machining position responsible for safely operating CNC mills and/or CNC lathes while meeting established productivity and quality standards.This position requires strong attention to detail and the ability to monitor machine performance, inspect finished parts, maintain tooling, and make necessary tooling and work-offset adjustments. CNC Machinists are also responsible for performing routine machine maintenance and maintaining a clean, safe, and organized work area. Swing Shift work available for extra pay.Key ResponsibilitiesSafely operate CNC equipment while following all company safety procedures and regulations.Work under the direction of the Shift Lead while operating up to two CNC mills or two CNC lathes.Meet established production and productivity goals while maintaining quality standards.Monitor cutting tools for wear and replace tooling as necessary.Change and touch off tooling and perform program restarts.Understand basic G-code and M-code and make appropriate tooling and work-offset adjustments.Read and interpret blueprints, drawings, dimensions, and manufacturing specifications.Measure finished parts and verify dimensions against blueprint requirements.Accurately complete dimensional inspection sheets and other required quality documentation.Deburr finished components and install hardware as required.Maintain proper coolant levels and monitor coolant concentration.Empty chip bins and properly separate materials for recycling.Complete required preventive maintenance (PM) on CNC equipment according to established schedules.Maintain a clean and organized work area throughout the shift.Sweep and mop the work area at the end of each shift and as needed.Identify and report equipment, tooling, quality, or production issues to the Shift Lead.Required QualificationsPrevious CNC machining or CNC production experience.Ability to operate CNC mills and/or CNC lathes.Working knowledge of G-code and M-code.Ability to change, touch off, and adjust CNC tooling.Ability to adjust tooling and work offsets.Ability to read and understand blueprints and manufacturing drawings.Ability to use measuring and inspection equipment to verify part dimensions.Basic math skills applicable to machining and dimensional inspection.Ability to follow written and verbal instructions.Must successfully pass a dimensional inspection test.Skills & CompetenciesStrong mechanical aptitude and conceptual problem-solving skills.Excellent attention to detail and commitment to quality.Dependable with a strong record of attendance and punctuality.Effective verbal communication skills.Sound judgment and ability to recognize and report potential problems.Ability to work effectively as part of a team.Strong organizational, planning, and time-management skills.Ability to accurately complete required production and quality documentation.Ability to prioritize work and meet established production expectations.Willingness and ability to learn new equipment, processes, and skills.Preferred QualificationsExperience operating multiple CNC machines simultaneously.Experience in an automotive, suspension, or precision manufacturing environment.Familiarity with preventive maintenance procedures for CNC equipment.Previous experience working in a production-focused machine shop.Physical RequirementsAbility to lift and move approximately 40–60 pounds.Ability to stand and work for the duration of the shift.Ability to bend, reach, stoop, and perform repetitive manufacturing tasks.Ability to safely handle raw materials, finished components, tooling, and equipment.Work EnvironmentThis position works in an active manufacturing and machine-shop environment. Employees will regularly work around CNC machinery, cutting tools, metal chips, coolants, and other manufacturing equipment. Appropriate personal protective equipment (PPE) must be worn as required.What We’re Looking ForWe are looking for a dependable CNC Machinist who takes pride in producing quality work and understands the importance of safety, productivity, attendance, and teamwork. The ideal candidate is mechanically inclined, detail-oriented, organized, and capable of keeping CNC equipment running efficiently while ensuring finished parts meet required specifications.ReadyLIFT is an Equal Opportunity Employer.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Machinist
CNC Machinist

TeraFlex Inc • Ogden (UT)

On-site
USD 30,000 - 41,000
CNC Machinist 2
CNC Machinist 2

TeraFlex Inc • Ogden (UT)

On-site
USD 52,000 - 80,000
Precision CNC Machinist — Swing Shift (Ogden, UT)
Precision CNC Machinist — Swing Shift (Ogden, UT)

Teraflex • Ogden (UT)

On-site
USD 30,000 - 41,000
CNC Programmer
CNC Programmer

TeraFlex Inc • Ogden (UT)

On-site
USD 70,000 - 110,000
CNC Machinist - Day Shift
CNC Machinist - Day Shift

Desert Tech LLC • Utah

Hybrid
USD 46,000 - 66,000
Paid holidays
Vacation time
Employee pricing on firearms
+3
CNC Machinist - Swing Shift
CNC Machinist - Swing Shift

Desert Tech • West Valley (WA)

On-site
USD 52,000 - 76,000
Paid holidays
Vacation time
Employee firearm pricing
+3
Precision CNC Machinist – Swing Shift Pay
Precision CNC Machinist – Swing Shift Pay

TeraFlex Inc • Ogden (UT)

On-site
USD 52,000 - 80,000
Swing-Shift CNC Machinist - Automotive Precision
Swing-Shift CNC Machinist - Automotive Precision

TeraFlex Inc • Ogden (UT)

On-site
USD 30,000 - 41,000
05288 - CNC Machinist – Aerospace Manufacturing
05288 - CNC Machinist – Aerospace Manufacturing

Crafted Staff • Ogden (UT)

On-site
USD 28,000 - 55,000
Relocation assistance
Tuition reimbursement
401(k) with match
+1
Engineer Quality Control II
Engineer Quality Control II

Teraflex • Ogden (UT)

On-site
USD 65,000 - 90,000