CNC Machinist

TeraFlex Inc

Ogden (UT)

On-site

USD 30,000 - 41,000

Full time

10 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

ReadyLIFT in Ogden, UT is seeking a skilled CNC Machinist to operate CNC mills and lathes, ensuring parts meet tight tolerances and quality standards. The role requires strong attention to detail, ability to read blueprints, and proficiency with G-code/M-code.

Swing shift is available for extra pay and the team emphasizes safety, reliability, and teamwork. As part of our manufacturing group, you will maintain tooling, perform offset adjustments, monitor tool wear, and participate in preventive

Qualifications

  • Previous CNC machining or CNC production experience.
  • Ability to operate CNC mills and/or CNC lathes.
  • Working knowledge of G-code and M-code.
  • Ability to change, touch off, and adjust CNC tooling.
  • Ability to read blueprints and manufacturing drawings.
  • Ability to use measuring and inspection equipment to verify part dimensions.
  • Basic math skills applicable to machining and dimensional inspection.
  • Must pass a dimensional inspection test.

Responsibilities

  • Safely operate CNC equipment following safety procedures.
  • Work under the direction of the Shift Lead operating up to two CNC mills or lathes.
  • Meet production goals while maintaining quality standards.
  • Monitor cutting tools for wear and replace tooling as necessary.
  • Change and touch off tooling and perform program restarts.
  • Read and interpret blueprints and manufacturing specifications.
  • Measure finished parts and verify dimensions against blueprint requirements.
  • Complete dimensional inspection sheets and quality documentation.
  • Deburr finished components and install hardware as required.
  • Maintain coolant levels and monitor concentration.
  • Keep work area clean and organized; sweep at shift end.
  • Identify and report equipment, tooling, or production issues.

Skills

CNC machining
G-code/M-code
Blueprint reading
Inspection/Metrology
Tooling setup
Mathematical precision
Safety focus
Teamwork

Tools

CNC mills
CNC lathes
Calipers & micrometers

Job description

Job Details

Job Location: Readylift - Ogden, UT 84404-1421, Position Type: Full Time, CNC Machinist

ReadyLIFT Ogden, Utah

About ReadyLIFT

ReadyLIFT is a leading automotive aftermarket brand specializing in innovative suspension systems and lift solutions for trucks and SUVs. As part of a growing family of automotive aftermarket brands, ReadyLIFT is committed to producing high-quality products that deliver performance, durability, and an improved driving experience.

Our Ogden manufacturing team plays an important role in producing the precision components that go into our suspension products. We are looking for dependable, mechanically skilled individuals who take pride in producing quality work.

Position Summary

The CNC Machinist is a production machining position responsible for safely operating CNC mills and/or CNC lathes while meeting established productivity and quality standards. This position requires strong attention to detail and the ability to monitor machine performance, inspect finished parts, maintain tooling, and make necessary tooling and work-offset adjustments. CNC Machinists are also responsible for performing routine machine maintenance and maintaining a clean, safe, and organized work area. Swing Shift work available for extra pay.

Key Responsibilities
  • Safely operate CNC equipment while following all company safety procedures and regulations.
  • Work under the direction of the Shift Lead while operating up to two CNC mills or two CNC lathes.
  • Meet established production and productivity goals while maintaining quality standards.
  • Monitor cutting tools for wear and replace tooling as necessary.
  • Change and touch off tooling and perform program restarts.
  • Understand basic G-code and M-code and make appropriate tooling and work-offset adjustments.
  • Read and interpret blueprints, drawings, dimensions, and manufacturing specifications.
  • Measure finished parts and verify dimensions against blueprint requirements.
  • Accurately complete dimensional inspection sheets and other required quality documentation.
  • Deburr finished components and install hardware as required.
  • Maintain proper coolant levels and monitor coolant concentration.
  • Empty chip bins and properly separate materials for recycling.
  • Complete required preventive maintenance (PM) on CNC equipment according to established schedules.
  • Maintain a clean and organized work area throughout the shift.
  • Sweep and mop the work area at the end of each shift and as needed.
  • Identify and report equipment, tooling, quality, or production issues to the Shift Lead.
Required Qualifications
  • Previous CNC machining or CNC production experience.
  • Ability to operate CNC mills and/or CNC lathes.
  • Working knowledge of G-code and M-code.
  • Ability to change, touch off, and adjust CNC tooling.
  • Ability to adjust tooling and work offsets.
  • Ability to read and understand blueprints and manufacturing drawings.
  • Ability to use measuring and inspection equipment to verify part dimensions.
  • Basic math skills applicable to machining and dimensional inspection.
  • Ability to follow written and verbal instructions.
  • Must successfully pass a dimensional inspection test.
Skills & Competencies
  • Strong mechanical aptitude and conceptual problem-solving skills.
  • Excellent attention to detail and commitment to quality.
  • Dependable with a strong record of attendance and punctuality.
  • Effective verbal communication skills.
  • Sound judgment and ability to recognize and report potential problems.
  • Ability to work effectively as part of a team.
  • Strong organizational, planning, and time-management skills.
  • Ability to accurately complete required production and quality documentation.
  • Ability to prioritize work and meet established production expectations.
  • Willingness and ability to learn new equipment, processes, and skills.
Preferred Qualifications
  • Experience operating multiple CNC machines simultaneously.
  • Experience in an automotive, suspension, or precision manufacturing environment.
  • Familiarity with preventive maintenance procedures for CNC equipment.
  • Previous experience working in a production-focused machine shop.
Physical Requirements
  • Ability to lift and move approximately 40-60 pounds.
  • Ability to stand and work for the duration of the shift.
  • Ability to bend, reach, stoop, and perform repetitive manufacturing tasks.
  • Ability to safely handle raw materials, finished components, tooling, and equipment.
Work Environment

This position works in an active manufacturing and machine-shop environment. Employees will regularly work around CNC machinery, cutting tools, metal chips, coolants, and other manufacturing equipment. Appropriate personal protective equipment (PPE) must be worn as required.

What We’re Looking For

We are looking for a dependable CNC Machinist who takes pride in producing quality work and understands the importance of safety, productivity, attendance, and teamwork. The ideal candidate is mechanically inclined, detail-oriented, organized, and capable of keeping CNC equipment running efficiently while ensuring finished parts meet required specifications.

ReadyLIFT is an Equal Opportunity Employer.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Machinist 2
CNC Machinist 2

TeraFlex Inc • Ogden (UT)

On-site
USD 52,000 - 80,000
CNC Programmer
CNC Programmer

TeraFlex Inc • Ogden (UT)

On-site
USD 70,000 - 110,000
Precision CNC Machinist — Swing Shift (Ogden, UT)
Precision CNC Machinist — Swing Shift (Ogden, UT)

Teraflex • Ogden (UT)

On-site
USD 30,000 - 41,000
CNC Machinist - Day Shift
CNC Machinist - Day Shift

Desert Tech LLC • Utah

Hybrid
USD 46,000 - 66,000
Paid holidays
Vacation time
Employee pricing on firearms
+3
05288 - CNC Machinist – Aerospace Manufacturing
05288 - CNC Machinist – Aerospace Manufacturing

Crafted Staff • Ogden (UT)

On-site
USD 28,000 - 55,000
Relocation assistance
Tuition reimbursement
401(k) with match
+1
CNC Machinist - Swing Shift
CNC Machinist - Swing Shift

Desert Tech • West Valley (WA)

On-site
USD 52,000 - 76,000
Paid holidays
Vacation time
Employee firearm pricing
+3
CNC Operator
CNC Operator

Smyth County Machine • Virginia

On-site
USD 42,000 - 66,000
401(k)
Day-one PTO
Medical coverage
+5
Precision CNC Machinist – Swing Shift Pay
Precision CNC Machinist – Swing Shift Pay

TeraFlex Inc • Ogden (UT)

On-site
USD 52,000 - 80,000
Senior CNC Machinist - Mills or Lathes
Senior CNC Machinist - Mills or Lathes

P & F Industries • Carson City (NV)

On-site
USD 62,000 - 81,000
CNC Machinist – Mill & Lathe Operator
CNC Machinist – Mill & Lathe Operator

Smart Resources • North Salt Lake (UT)

On-site
USD 25,000 - 34,000