CNC Machine Operator - 2nd Shift

QCC, LLC; Harwood Heights (IL); In loco; USD 42.000 - 64.000; Tempo pieno

Vantaggi offerti da questo lavoro

Health, Dental and Vision, Life and AD

401(k) matching

Paid time off plus 10 paid holidays

Educational Assistance

Yearly safety shoes allowance

Opportunities for advancement

Descrizione del lavoro

QCC, LLC manufactures parts within a cell with multiple machines to exacting blueprint dimensions and ensure 100%-part quality. Operator performs simple set-ups and tool changes on manual and CNC turning / milling machining centers to extend tool life while meeting production rates.

This on-site role requires reading drawings, GD&T, and performing first-piece inspections, with emphasis on quality procedures and calibration of inspection equipment.

Competenze

• High school diploma or GED required with 3+ years CNC milling/turning in a job shop.
• Ability to read blueprints and perform first piece inspections.
• Familiar with GD&T and maintaining tight tolerances.

Mansioni

• Set up and operate CNC mills and lathes to produce parts to tolerances.
• Follow setup sheets and procedures; notify supervisor if rates fall short.
• Perform first piece inspections and document findings.
• Maintain equipment and work area; ensure calibration of inspection tools.
• Troubleshoot processes with Manufacturing Engineers as needed.

Conoscenze

CNC Milling

CNC Turning

Reading blueprints

GD&T basics

Formazione

High school diploma or GED

3+ years CNC Milling / Turning experience

Strumenti

Micrometer

Vernier caliper

Drop indicator

Optical comparator

Profilometer

Descrizione del lavoro

SUMMARY

Manufacture parts within a cell with multiple machines to exacting blueprint dimensions and ensure 100%-part quality. Performs simple set-ups and tool changeovers on both manual and CNC turning / milling machining centers. Extend tool life while meeting production rates.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Performs simple or repeat set-ups and operates equipment to produce high quality parts (100% good pieces) within prescribed routed time to meet production demands. If standard production rates cannot be met, the operator must notify his supervisor.
• Follows documented set-up sheets according to established procedures.
• Knowledgeable in basic GD&T and its application relative to part manufacture and inspection. Read and understand drawings to effectively manufacture parts to close tolerances.
• Maintains equipment via established preventative maintenance schedules.
• Follows all prescribed quality procedures and inspection plans.
• Performs 1st piece inspections and monitors own work to meet process requirements including fully documenting inspections reports developed by the Quality department.
• Verifies that the inspection equipment being utilized is in calibration and performs a simple daily check against a known master to ensure the accuracy of the gage to be used.
• Maintains area in a neat an orderly manner.
• Knowledgeable with tool / insert selection and utilizing the correct feeds and speeds for the materials being machined.
• Follows supervisor’s direction to troubleshoot problem processes, interfacing with Manufacturing Engineers if necessary.
• Any additional duties as assigned by supervisor.

EDUCATION and/or EXPERIENCE

High school diploma or general education degree (GED); 3+ years CNC Milling / Turning experience in a job shop environment.

LANGUAGE SKILLS

Ability to read and interpret documents such as drawings and routings, safety rules, operating and maintenance instructions, and procedure manuals. Ability to record process notes and document continuous improvement ideas. Must be able to clearly communicate with co-workers and supervisor verbally.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

REASONING ABILITY

Ability to solve inspection problems drawing from one's experience and develop new approaches. Must be able to correctly interpret GD&T on drawings and apply them to the manufacture and inspection of parts produced.

Inspection Skills

Must be able to read a micrometer, drop indictor and vernier caliper. Should be able to utilize the optical comparator and profilometer. Complete 1st piece inspection reports as required per routing.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to walk; use hands to finger, handle, or feel; reach with hands and arms; and talk, or hear. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 15 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 65 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Benefits

• Health, Dental and Vision, Life and AD&D Insurance.
• 401(k) matching
• Paid time off plus 10 paid holidays
• Educational Assistance
• Yearly safety shoes allowance
• Opportunities for advancement

QCC, LLC is an Equal Opportunity Employer EOE, M/F/D/V