Bobst Diecut Operator

AM Packaging & Lithography; Holyoke (MA); Presencial; USD 28.000 - 39.000; Jornada completa

Ventajas ofrecidas por este puesto de trabajo

Health Insurance

Dental Insurance

401(k)

Paid Holidays

Vacation

Sick Leave

MA PFML

Descripción de la vacante

AM Lithography Corporation in Holyoke, MA, is seeking a Bobst Diecut Operator to setup and run automatic flatbed Bobst die cutters for folding cartons and secondary packaging. You will ensure accuracy, quality, and on-time production while adhering to safety standards.

You will own the job from make-ready through the last skid, train less-experienced operators, and maintain a clean, safe work area on an assigned shift with overtime as needed.

Formación

• 2+ years operating an automatic flatbed die cutter (Bobst or similar) in folding carton, packaging or commercial print.
• Hands-on make-readies: installing and registering dies, setting pressure, and setting up stripping and blanking.
• Ability to read job tickets, specifications and samples, and to measure accurately with a rule and calipers.
• Commitment to safety procedures, including lockout/tagout and PPE.
• Ability to work an assigned shift and overtime when production requires it.
• Bobst experience specifically is preferred; foil stamping and embossing setup experience is a plus.

Responsabilidades

• Set up and run Bobst die cutters to convert printed sheets into finished folding cartons.
• Check first-off sheets against samples and sign-off before full run.
• Maintain clean, organized and safe work area; follow all safety procedures.
• Monitor production, identify and correct issues to minimize waste.
• Train less-experienced operators when asked.

Conocimientos

Diecut operator

Bobst die cutter operation

Quality awareness

Educación

High school diploma or equivalent

Herramientas

Bobst die cutter

Descripción del empleo

Title

Bobst Diecut Operator

Reports to

Die Cutting Manager (Packaging)

Job Description

Bobst Diecut Operator

AM Lithography Corporation has delivered specialty commercial print and secondary packaging from Chicopee, Massachusetts for more than 30 years. We pair high-end print and finishing capability with business-friendly, responsive service.

Role Snapshot

Title

Bobst Diecut Operator

Company

AM Lithography Corporation

Department

Production: Packaging (die cutting)

Reports to

Die Cutting Manager (Packaging)

Level

Individual contributor

Direct reports

None. Helps train less-experienced operators

Location

Holyoke, MA (Packaging)

Schedule

Full-time, 40 hours/week on an assigned shift; overtime as production requires

FLSA status

Non-exempt (hourly)

Benefits

Health, dental, 401(k), paid holidays, vacation, sick leave, MA PFML

About The Role

The Bobst Diecut Operator sets up and runs our automatic flatbed Bobst die cutters. This role turns printed sheets into cut, creased, stripped and blanked folding cartons and other secondary packaging, with foil stamping and embossing on jobs that call for it. Every job must match the customer’s specifications, our quality standards and the production schedule, and be run safely. Die cutting sits between the press and the folder-gluer, so a problem missed here becomes waste, rework or a late shipment further down the line. The operator owns the job from make-ready through the last skid: checking the first sheet against the approved sample, catching problems before they multiply, and leaving the machine and tooling ready for the next shift.

Success in this role looks like this:

• Every job is checked against the job ticket and approved sample before the run starts, and nothing ships that does not meet specification.
• Make-readies are fast and right the first time, and waste stays within the job allowance.
• Scheduled quantities are finished on time, and problems are caught before large quantities of bad product are made.
• Production, waste and quality records are complete and accurate every shift.
• The machine, dies and work area are clean, organized and safe, and no guard or interlock is ever bypassed.

What You’ll Do

Job preparation and make-ready ~25% of time

• Review the job ticket, specifications, samples and approved artwork before every job.
• Verify the correct stock, cutting die, counter/creasing matrix, stripping and blanking tools and cutting plate before starting.
• Select, install and register dies and tooling using hand tools; set cutting pressure, feeder, register, stripping, blanking and delivery settings.
• Set up and run foil stamping and embossing operations on jobs that require them.

Running production ~40% of time

• Run the Bobst at the speed the job and stock allow while holding quality.
• Inspect first-off sheets for accurate cutting, creasing, perforating, stripping and registration, and get the required sign‑off before the full run.
• Monitor the machine throughout the run and make adjustments as needed.
• Identify and correct problems such as poor stripping, nicks, incomplete cuts, cracking, tearing, scoring issues, register problems or excess waste.
• Stack, count, label and move finished product to the next operation (folder-gluer, finishing or shipping), and remove defective sheets from the run.

Quality and records ~15% of time

• Pull and check samples at the required intervals and record the results.
• Complete production paperwork, counts, waste records and quality records accurately for every job.
• Put suspect product on hold and report quality issues to your supervisor right away.

Safety and equipment care ~15% of time

• Follow all machine safety procedures, including lockout/tagout; never bypass guards, interlocks or other safety devices.
• Wear required PPE, keep safe distances from moving equipment and use proper lifting and material-handling techniques.
• Perform routine cleaning, lubrication and basic preventive maintenance; report machine problems and damaged tooling to your supervisor and Maintenance.
• Handle, clean and return dies and tooling to storage so they are ready for the next job.
• Report unsafe conditions, injuries and near misses immediately.

Teamwork and cross-training ~5% of time

• Work with press operators, folder-gluer and bindery operators, quality control and supervisors to keep jobs moving.
• Help with trimming, folding and other finishing work when assigned.
• Help train less-experienced operators when asked.

Required

What You Bring

• 2+ years operating an automatic flatbed die cutter (Bobst or similar) in folding carton, packaging or commercial print.
• Hands‑on make‑ready experience: installing and registering dies, setting pressure, and setting up stripping and blanking.
• Ability to read job tickets, specifications and samples, and to measure accurately with a rule and calipers.
• Ability to spot and correct cutting, creasing, stripping and register problems.
• Commitment to safety procedures, including lockout/tagout and PPE.
• Ability to work an assigned shift and overtime when production requires it.

Preferred

• Bobst experience specifically.
• Foil stamping and embossing setup experience.
• Experience with paperboard and other packaging substrates.
• Mechanical aptitude for troubleshooting and basic preventive maintenance.
• Pallet jack or forklift certification.
• Experience training other operators.
• High school diploma or equivalent.

How You Work

• You check the first sheet the way the customer will.
• You stop the machine rather than keep running bad product.
• You leave the machine, dies and work area ready for the next shift.
• You never take a shortcut around a guard.

Working Conditions

• Production floor; stands for the full shift around moving machinery.
• Exposure to plant noise, paper dust and production materials; PPE provided where required.
• Frequently lifts and moves up to 50 lbs (dies, tooling, stock and finished product).
• Repetitive hand and arm movements; regularly bends, reaches, pushes and pulls; uses pallet jacks and carts.
• Shift work, with overtime as production requires.

What We Offer

• Health and dental insurance, 401(k), paid holidays, vacation and sick leave, MA Paid Family & Medical Leave.

AM Lithography Corporation is an equal opportunity employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or any other legally protected status. Reasonable accommodations are available on request.