3rd Shift Senior Team Lead - Operations & Training

Revere Plastics Systems

Clyde (OH)

On-site

USD 65,000 - 90,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Revere Plastics Systems is seeking a Senior Team Lead for the 3rd shift to mentor machine operators and drive production efficiency. You will oversee training, ensure adherence to SOPs, and maintain safety and quality standards to meet customer deadlines.

You will coordinate handoffs, supervise line performance, and work closely with the Quality Tech to resolve issues, document results in IQMS, and support continuous improvement across the cell.

Qualifications

  • Responsible for the effective and efficient training of all Operators assigned within their work cell - Maintains accurate training records/logs for each individual that correlates to the customer part number.
  • Verify the operator(s) are trained/certified and understands how to run the Workstation (ref versatility matrix)
  • Conduct Work Cell traceability - Ensure documentation at the work cell is accurate and up-to-date
  • Verify Work Cell has been purged of all components, materials and etc. at the end of any production run or sample run
  • Ensure all Error-Proofing Devices (Poke Yokes) are operational and Red-X tests are documented
  • Troubleshoot any quality concerns (even if minor) with the Quality Tech and elevate any roadblocks to achieve closure
  • Verify first piece acceptance prior to start-up or any re-start
  • Make sure all operators are following Standard Operating Processes
  • Assist with Training new operators and follow-up retraining as necessary
  • Ensure all material is properly covered in work cell to avoid contamination
  • Be at workstation ready to work on time to get proper handoff
  • Ensure all operators paperwork is available and filled out hourly for the workstation
  • Ensure all production board requirements for workstation are filled out every hour
  • Achieve hourly rate for workstation and troubleshoot any Product target misses with operators and support technicians to achieve target rate. Escalate issues to the Senior Leads and/or Supervisor as necessary
  • Do not leave workstation until there is a good handoff to the ongoing cell lead
  • Make sure all re-work is completed on the appropriate shift
  • Attend daily shift hand off meetings
  • Give breaks to all operators in the cell as needed
  • Ensure accurate reporting of Production in IQMS in conjunction with proper floor dispositioning of product
  • Ensure PPE compliance with all operators (Safety Glasses, Earplugs Always-Gloves, Steel-Toe boots, Safety Vest if applicable)
  • Conduct Safety Walks prior to shift start with outgoing lead and throughout the shift to ensure the safety of the area is in compliance. Sign-off on the designated Audit sheet and populate the GEMBA tracker
  • Ensure Workstation Equipment and Tools are in safe standard-working condition
  • Maintain Workstation Housekeeping and 5S (A place for everything and everything in its place)
  • All Safety concerns escalated immediately to Supervisor and shutdown in an emergency situation
  • Assist Safety Committee staff on any additional support that may be required.

Responsibilities

  • Responsible for the effective and efficient training of all Operators assigned within their work cell - Maintains accurate training records/logs for each individual that correlates to the customer part number.
  • Verify the operator(s) are trained/certified and understands how to run the Workstation (ref versatility matrix)
  • Conduct Work Cell traceability - Ensure documentation at the work cell is accurate and up-to-date
  • Verify Work Cell has been purged of all components, materials and etc. at the end of any production run or sample run
  • Ensure all Error-Proofing Devices (Poke Yokes) are operational and Red-X tests are documented
  • Troubleshoot any quality concerns (even if minor) with the Quality Tech and elevate any roadblocks to achieve closure
  • Verify first piece acceptance prior to start-up or any re-start
  • Make sure all operators are following Standard Operating Processes
  • Assist with Training new operators and follow-up retraining as necessary
  • Ensure all material is properly covered in work cell to avoid contamination
  • Be at workstation ready to work on time to get proper handoff
  • Ensure all operators paperwork is available and filled out hourly for the workstation
  • Ensure all production board requirements for workstation are filled out every hour
  • Achieve hourly rate for workstation and troubleshoot any Product target misses with operators and support technicians to achieve target rate. Escalate issues to the Senior Leads and/or Supervisor as necessary
  • Do not leave workstation until there is a good handoff to the ongoing cell lead
  • Make sure all re-work is completed on the appropriate shift
  • Attend daily shift hand off meetings
  • Give breaks to all operators in the cell as needed
  • Ensure accurate reporting of Production in IQMS in conjunction with proper floor dispositioning of product
  • Ensure PPE compliance with all operators (Safety Glasses, Earplugs Always-Gloves, Steel-Toe boots, Safety Vest if applicable)
  • Conduct Safety Walks prior to shift start with outgoing lead and throughout the shift to ensure the safety of the area is in compliance. Sign-off on the designated Audit sheet and populate the GEMBA tracker
  • Ensure Workstation Equipment and Tools are in safe standard-working condition
  • Maintain Workstation Housekeeping and 5S (A place for everything and everything in its place)
  • All Safety concerns escalated immediately to Supervisor and shutdown in an emergency situation
  • Assist Safety Committee staff on any additional support that may be required.

Skills

Training
Quality control
SOP compliance
Safety
Shift leadership
Communication

Tools

IQMS
Poke Yokes

Job description

Revere Plastics Systems is seeking a Senior Team Lead for the 3rd shift to mentor machine operators and drive production efficiency. You will oversee training, ensure adherence to SOPs, and maintain safety and quality standards to meet customer deadlines.

You will coordinate handoffs, supervise line performance, and work closely with the Quality Tech to resolve issues, document results in IQMS, and support continuous improvement across the cell.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior 3rd-Shift Production Lead — Training & Safety
Senior 3rd-Shift Production Lead — Training & Safety

Revere Plastics Systems, LLC • Clyde (OH)

On-site
USD 65,000 - 90,000
3rd Shift Production Team Lead — Safety, Coaching & Ops
3rd Shift Production Team Lead — Safety, Coaching & Ops

Revere Plastics Systems, LLC • Jeffersonville (IN)

On-site
USD 65,000 - 82,000
Senior Team Lead- 3rd shift Area 1
Senior Team Lead- 3rd shift Area 1

Revere Plastics Systems, LLC • Clyde (OH)

On-site
USD 65,000 - 90,000
Senior Team Lead- 3rd shift Area 1
Senior Team Lead- 3rd shift Area 1

Revere Plastics Systems • Clyde (OH)

On-site
USD 65,000 - 90,000
Sr. Production Team Lead - 3rd Shift
Sr. Production Team Lead - 3rd Shift

Revere Plastics Systems, LLC • Jeffersonville (IN)

On-site
USD 65,000 - 82,000
Lead Plastics Maintenance Supervisor - 3rd Shift
Lead Plastics Maintenance Supervisor - 3rd Shift

Precision Elite Recruiting • Mebane (NC)

On-site
USD 75,000 - 105,000
3rd shift differential
3rd Shift Production Lead: Safety, Quality & Coordination
3rd Shift Production Lead: Safety, Quality & Coordination

Rehrig Pacific Company • Petersburg (VA)

On-site
USD 30,000 - 39,000
3rd Shift Team Lead: Manufacturing & Training
3rd Shift Team Lead: Manufacturing & Training

Techniplas, LLC • Anderson (SC)

On-site
USD 32,000 - 44,000
3rd Shift Team Lead: Manufacturing & Safety
3rd Shift Team Lead: Manufacturing & Safety

RQ Construction, LLC • Piedmont (SC)

On-site
USD 28,000 - 33,000
Health Insurance
401(k) matching
Dental Insurance
+8
Evening Shift Production Leader – Plastics
Evening Shift Production Leader – Plastics

Pretium Packaging - USA • Manchester

On-site
USD 75,000 - 95,000