Site QA/QC

ZEROFRAME; Taguig; Hybrid; PHP 450,000 - 650,000; Full time

Job summary

ZEROFRAME is seeking a Site QA/QC Officer in Taguig, Philippines. You will ensure on-site installations of glass, aluminum, doors and curtain walls meet approved drawings and project specs, and you will be hands-on in identifying defects from delivery to turnover.

The role requires a degree in Architecture or Engineering, a valid license is an advantage, and at least 2 years in QA/QC or site supervision with experience in glass/aluminum installations.

Qualifications

• Degree in Architecture, Civil Engineering, Engineering, Construction Management, or related field.
• Licensed Architect/Engineer is an advantage.
• Minimum 2 years in QA/QC, construction inspection, or site supervision.

Responsibilities

• Inspect incoming materials for quantity, dimensions, finish, and damage.
• Document and report any damaged or incomplete materials immediately.
• Verify site conditions and compatibility with drawings before installation.
• Coordinate discrepancies with Site Supervisor/PM/Technical Team/Client before installation.
• Inspect ongoing installation for alignment, level, and proper sealant application.

Skills

QA/QC

Construction inspection

Site supervision

Glass & aluminum installation

Attention to detail

Reporting & documentation

Coordination skills

Willing to travel

Education

Bachelor's degree (Architecture / Civil Engineering / Construction Management)

Job description

About the role

The Site QA/QC Officer is responsible for ensuring that all on-site installation works comply with approved drawings, project specifications, agreed standards, and Zeroframe quality requirements. The position focuses on the quality of glass, aluminum, doors, windows, shower enclosures, curtain walls, frameless systems, sliding doors, and other architectural installations from material delivery through final turnover. The Site QA/QC Officer must be hands-on, detail-oriented, and proactive in identifying defects before they become costly rework or client complaints.

Key responsibilities

• Inspect materials upon arrival at the project site including glass panels, aluminum profiles, doors, windows, hardware, silicone, sealants, gaskets, curtain wall components, and sliding door components, verifying quantity, dimensions, type/specification, finish/color, condition, completeness, and visible damage
• Document and report immediately any damaged, incorrect, or incomplete material
• Before installation, verify actual site dimensions, opening dimensions, floor and wall conditions, level and plumb, required clearances, anchor/support locations, waterproofing conditions, work area readiness, and compatibility of delivered materials with approved drawings
• Coordinate discrepancies with the Site Supervisor, Project Manager, Technical Team, and/or Client/Contractor before installation proceeds
• Inspect ongoing installation to ensure compliance with approved drawings and installation procedures, checking proper positioning and alignment, level and plumb, glass clearance, aluminum alignment, frame installation, hardware installation, fasteners and anchors, silicone and sealant application, gaskets and setting blocks, door gaps and clearances, sliding movement, locking mechanisms, waterproofing/sealing, and protection of finished surfaces
• Ensure glass is correct type and thickness, correct size and configuration, properly positioned, free from cracks and chips, free from scratches and unacceptable defects, properly supported, properly sealed, and installed with correct clearances
• Check that doors and windows open and close properly, are properly aligned, have correct clearances, lock and unlock properly, have properly installed hardware, operate smoothly, have proper sealing, and have no unnecessary rubbing or binding
• Prepare NCR / Quality Incident Report for significant deviations including wrong material, wrong dimension, installation outside approved specifications, damaged materials, poor workmanship, repeated installation errors, unauthorized modification, failure to follow approved drawings, and safety or quality-critical deficiencies
• Conduct regular inspections and prepare punch lists, identifying, documenting, assigning, correcting, re-inspecting, and closing deficiencies before client/contractor final inspection
• Before turnover, verify all doors and windows operate properly, sliding systems operate smoothly, locks and hardware function correctly, glass is clean and free from damage, aluminum surfaces are free from unacceptable scratches/dents, sealants are properly finished, all required components are installed, protection materials are removed appropriately, work area is clean, and punch-list items are closed

About you

• Graduate of Architecture, Civil Engineering, Engineering, Construction Management, or related course
• Licensed Architect/Engineer is an advantage
• At least 2 years of QA/QC, construction inspection, or site supervision experience
• Experience in glass and aluminum installation is highly preferred
• Knowledge of architectural drawings and shop drawings
• Ability to conduct site measurements and inspections
• Strong attention to detail
• Good reporting and documentation skills
• Strong communication and coordination skills
• Willing to travel to different project sites