Staff Design Engineer

Lattice Semiconductor

George Town

On-site

MYR 180,000 - 280,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Lattice Semiconductor in Malaysia is seeking a Staff Design Engineer to integrate USB IP and FPGA subsystems for next‑generation products. You will lead USB controller/PHY integration, validation, and cross‑functional collaboration with Design, DV, Software, and external IP partners.

You will define RTL, wrappers, interfaces, test plans, bring-up support, and pursue AI‑assisted productivity improvements in a fast-paced, team‑driven environment.

Qualifications

  • Bachelor's or Master's degree in Electrical Engineering or related field.
  • Typically 8+ years of semiconductor, ASIC, SoC, or FPGA design experience.
  • Strong RTL design and subsystem integration experience including clock/reset.
  • Strong experience with USB 2.0 or USB 3.x controller/ PHY integration.
  • Experience with Design Verification and pre-silicon debugging using sim/emu/fpga prototyping.
  • Experience supporting silicon bring-up, lab debugging, and interoperability.
  • Experience with DFT/DFD methodologies and production-test considerations.
  • Demonstrated AI-assisted engineering workflow improvements and strong communication.

Responsibilities

  • Own integration of USB controller and USB PHY IP into the FPGA subsystem.
  • Define and implement subsystem RTL, wrappers, adapters, and configuration interfaces.
  • Collaborate with DV teams to define test plans and validate USB behavior through sims and prototyping.
  • Drive root-cause analysis across USB controller-to-PHY interactions and RTL software.
  • Work with software/firmware teams on USB configuration, diagnostics, and initialization.
  • Integrate and review DFT/DFD requirements for testing and bring-up.
  • Coordinate with third-party USB IP suppliers on interfaces and deliverables.
  • Develop USB integration specifications and bring-up guidelines; document findings.

Skills

RTL design
Subsystem integration
USB 2.0/3.x
Design Verification
FPGA prototyping
AI-assisted workflows
Technical communication
Cross-team collaboration

Education

Bachelor's degree in Electrical Engineering
Master's degree in Electrical Engineering

Tools

FPGA prototyping environments
Simulation/Emulation
ASIC/SoC verification tools

Job description

Lattice Overview

There is energy here…energy you can feel crackling at any of our international locations. It’s an energy generated by enthusiasm for our work, for our teams, for our results, and for our customers. Lattice is a worldwide community of engineers, designers, and manufacturing operations specialists in partnership with world-class sales, marketing, and support teams, who are developing programmable logic solutions that are changing the industry. Our focus is on R&D, product innovation, and customer service, and to that focus, we bring total commitment and a keenly sharp competitive personality.

Energy feeds on energy. If you flourish in a fast paced, results-oriented environment, if you want to achieve individual success within a “team first” organization, and if you believe you can contribute and succeed in a demanding yet collegial atmosphere, then Lattice may well be just what you’re looking for.

Job Description

Position Summary

Join the winning team! Lattice is looking for a motivated and experienced Staff Design Engineer to integrate and productize USB IP and subsystems for next-generation FPGA products. The role focuses on USB 2.0 and USB 3.x controller and PHY integration, spanning subsystem validation, software enablement, silicon bring-up, and collaboration across Design, DV, Software, Applications, and external IP partners.

Key Responsibilities
  • Own the integration of USB controller and USB PHY IP into the FPGA subsystem, including digital interfaces, configuration paths, clock/reset connectivity, and integration requirements.
  • Define and implement the subsystem-level RTL, wrappers, adapters, control logic, and configuration interfaces required to integrate USB controller and PHY IP.
  • Work with Design Verification teams to define integration test plans and validate end-to-end USB subsystem behavior through simulation, emulation, FPGA prototyping, coverage closure, and pre-silicon debug.
  • Drive subsystem-level root-cause analysis across USB controller-to-PHY interaction, integration RTL, software or firmware configuration, interoperability, compliance, and silicon behavior.
  • Work with software and firmware teams to define and validate USB configuration, feature enablement, diagnostics, enumeration, initialization, and user-flow requirements.
  • Integrate and review DFT and DFD requirements for the USB subsystem, including testability, debug observability, silicon bring-up, and production-test considerations.
  • Work with third-party suppliers of USB controller and PHY IP to clarify interface and configuration requirements, review deliverables, and resolve integration, verification, and silicon issues.
  • Develop and maintain USB subsystem integration specifications, interface requirements, configuration documentation, and bring-up guidelines.
  • Support integrated USB subsystem bring-up, laboratory debug, protocol analysis, compliance and interoperability testing, and customer issue resolution; document findings and drive assigned issues to closure.
  • Identify engineering activities that can benefit from AI assistance, and propose, develop, and deploy practical AI-assisted workflows for design, verification, debug, data analysis, and technical documentation.
  • Participate in design reviews and quality checks, and contribute to continuous improvement of design and debug methodologies.
Required Qualifications
  • Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, Computer Engineering, or a related discipline.
  • Typically 8+ years of semiconductor, ASIC, SoC, or FPGA design experience.
  • Strong RTL design and subsystem integration experience, including clock/reset architecture, configuration interfaces, timing, and CDC/RDC considerations.
  • Strong experience with USB 2.0 or USB 3.x controller, protocol, subsystem integration, or related USB PHY technology.
  • Experience working with Design Verification teams and debugging pre-silicon design or integration issues using simulation, emulation, or FPGA prototyping environments.
  • Experience supporting silicon bring-up, laboratory debug, interoperability, or customer issue resolution.
  • Experience working with DFT or DFD methodologies, including testability, debug observability, scan/ATPG, silicon bring-up, or production-test considerations.
  • Demonstrated experience identifying opportunities, proposing, developing, and implementing AI-assisted engineering workflows to improve design and integration productivity, technical investigation, debug, data analysis, and documentation.
  • Strong technical communication and collaboration skills across engineering disciplines.
Preferred Qualifications
  • Experience with USB protocol operation and debug, including enumeration, link state transitions, power management, error recovery, and compliance or interoperability testing.
  • Experience with USB controller-to-PHY interfaces and specifications, such as UTMI/UTMI+, ULPI, PIPE, or related integration interfaces.
  • Experience with SerDes-based protocols or high-speed serial interfaces, including protocol architecture, controller-to-PHY integration, link bring-up, or system-level debug.
  • Understanding of USB PHY and mixed-signal behavior, including clocking, calibration, termination, equalization, jitter, reset sequencing, power management, initialization, and bring-up. Direct analog circuit design experience is not required.
  • Experience integrating third-party USB controller or PHY IP and working with external IP suppliers on requirements, deliverables, integration, verification, or silicon issues.
  • Familiarity with physical-design interfaces such as synthesis, LEC, static timing analysis, or timing closure.
  • Experience with design-quality methodologies such as Lint, CDC, RDC, low-power/UPF, or related structural checks.
  • Knowledge of firmware, device configuration, APIs, scripts, drivers, or FPGA software-tool enablement.
  • Exposure to USB compliance, interoperability, package, board, signal-integrity, connector, or platform-level considerations.
Additional Information

This position requires a successful background and reference checks and satisfactory proof of your right to work in:

Malaysia

Lattice recognizes that employees are its greatest asset and the driving force behind success in a highly competitive, global industry. Lattice continually strives to provide a comprehensive compensation and benefits program to attract, retain, motivate, reward and celebrate the highest caliber employees in the industry.

Lattice is an international, service-driven developer of innovative low cost, low power programmable design solutions. Our global workforce, some 1,000 strong, shares a total commitment to customer success and an unbending will to win. For more information about how our FPGA, CPLD and programmable power management devices help our customers unlock their innovation, visit www.latticesemi.com. You can also follow us via Twitter, Facebook, or RSS. At Lattice, we value the diversity of individuals, ideas, perspectives, insights and values, and what they bring to the workplace. Applications are welcome from all qualified candidates.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Staff Design Engineer
Staff Design Engineer

Lattice Semiconductor • Penang

On-site
MYR 180,000 - 300,000
Staff Design Engineer
Staff Design Engineer

Lattice Semiconductor Corp. • Penang

On-site
MYR 180,000 - 260,000
Staff Design Engineer
Staff Design Engineer

Lattice Malaysia • Malaysia

On-site
MYR 150,000 - 210,000
Staff Design Verification Engineer
Staff Design Verification Engineer

Lattice Semiconductor • George Town

On-site
MYR 180,000 - 300,000
Staff Applications Engineer
Staff Applications Engineer

Lattice Semiconductor • George Town

On-site
MYR 180,000 - 260,000
Senior Design Verification Engineer
Senior Design Verification Engineer

Lattice Semiconductor • George Town

On-site
MYR 180,000 - 240,000
Senior Staff Design Engineer
Senior Staff Design Engineer

Lattice Semiconductor • Malaysia

On-site
MYR 180,000 - 250,000
Staff Software Development Engineer
Staff Software Development Engineer

Lattice Semiconductor • Penang

On-site
MYR 180,000 - 280,000
Software Development Engineer
Software Development Engineer

Lattice Semiconductor • Penang

On-site
MYR 150,000 - 230,000
Manager, Design Eng (Design Verification)
Manager, Design Eng (Design Verification)

Lattice Semiconductor • George Town

On-site
MYR 180,000 - 300,000