Staff Design Engineer

Lattice Malaysia

Malaysia

On-site

MYR 150,000 - 210,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Lattice Malaysia is seeking a Staff Design Engineer to lead USB controller and PHY IP integration into FPGA subsystems for next generation devices. The role covers end-to-end bring‑up, validation, and collaboration with Design, DV, Software, and external IP partners.

You will own RTL, configuration interfaces, and test plans, work with cross-functional teams to ensure silicon bring-up and production readiness, and contribute AI-assisted workflows to improve design and debugging efficiency.

Qualifications

  • Bachelor's or Master's in Electrical/Computer Engineering.
  • Typically 8+ years of semiconductor, ASIC, SoC, or FPGA design experience.
  • Strong RTL design and subsystem integration experience, incl. clock/reset, configuration interfaces and timing.
  • Experience with USB 2.0 or USB 3.x controller/PHY.
  • Experience with Design Verification and pre-silicon debugging.
  • Experience supporting silicon bring-up and lab debugging.
  • Experience with DFT/DFD methodologies and production-test considerations.
  • Demonstrated ability to propose AI-assisted engineering workflows to improve productivity and debugging.

Responsibilities

  • Own the integration of USB controller and USB PHY IP into the FPGA subsystem, incl. interfaces and configuration.
  • Define and implement the subsystem RTL, wrappers, adapters, and configuration interfaces.
  • Work with DV teams to define integration test plans and validate USB subsystem behavior.
  • Drive root-cause analysis across USB controller-to-PHY interaction and RTL integration.
  • Collaborate with software/firmware teams on USB configuration and user-flow requirements.
  • Review DFT/DFD requirements for testability and bring-up considerations.
  • Liaise with third-party USB IP suppliers on interfaces and issues.
  • Develop and maintain USB integration specifications and bring-up guidelines.
  • Support USB bring-up, debugging, compliance testing, and issue resolution.
  • Identify AI-assisted workflows to improve design and debugging productivity.

Skills

RTL design
USB IP integration
FPGA design
Debug & verification
Team collaboration

Education

Bachelor's or Master's in Electrical/Computer Engineering

Tools

Verilog
VHDL
FPGA prototyping
Emulation
Simulation tools

Job description

Lattice Overview

There is energy here…energy you can feel crackling at any of our international locations. It’s an energy generated by enthusiasm for our work, for our teams, for our results, and for our customers. Lattice is a worldwide community of engineers, designers, and manufacturing operations specialists in partnership with world-class sales, marketing, and support teams, who are developing programmable logic solutions that are changing the industry. Our focus is on R&D, product innovation, and customer service, and to that focus, we bring total commitment and a keenly sharp competitive personality. Energy feeds on energy. If you flourish in a fast paced, results-oriented environment, if you want to achieve individual success within a “team first” organization, and if you believe you can contribute and succeed in a demanding yet collegial atmosphere, then Lattice may well be just what you’re looking for.

Job Description: Position Summary

Join the winning team! Lattice is looking for a motivated and experienced Staff Design Engineer to integrate and productize USB IP and subsystems for next-generation FPGA products. The role focuses on USB2.0 and USB3.x controller and PHY integration, spanning subsystem validation, software enablement, silicon bring-up, and collaboration across Design, DV, Software, Applications, and external IP partners.

Key Responsibilities
  • Own the integration of USB controller and USB PHY IP into the FPGA subsystem, including digital interfaces, configuration paths, clock/reset connectivity, and integration requirements.
  • Define and implement the subsystem-level RTL, wrappers, adapters, control logic, and configuration interfaces required to integrate USB controller and PHY IP.
  • Work with Design Verification teams to define integration test plans and validate end-to-end USB subsystem behavior through simulation, emulation, FPGA prototyping, coverage closure, and pre-silicon debug.
  • Drive subsystem-level root-cause analysis across USB controller-to-PHY interaction, integration RTL, software or firmware configuration, interoperability, compliance, and silicon behavior.
  • Work with software and firmware teams to define and validate USB configuration, feature enablement, diagnostics, enumeration, initialization, and user-flow requirements.
  • Integrate and review DFT and DFD requirements for the USB subsystem, including testability, debug observability, silicon bring-up, and production-test considerations.
  • Work with third-party suppliers of USB controller and PHY IP to clarify interface and configuration requirements, review deliverables, and resolve integration, verification, and silicon issues.
  • Develop and maintain USB subsystem integration specifications, interface requirements, configuration documentation, and bring-up guidelines.
  • Support integrated USB subsystem bring-up, laboratory debug, protocol analysis, compliance and interoperability testing, and customer issue resolution; document findings and drive assigned issues to closure.
  • Identify engineering activities that can benefit from AI assistance, and propose, develop, and deploy practical AI-assisted workflows for design, verification, debug, data analysis, and technical documentation.
  • Participate in design reviews and quality checks, and contribute to continuous improvement of design and debug methodologies.
Required Qualifications
  • Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, Computer Engineering, or a related discipline.
  • Typically 8+ years of semiconductor, ASIC, SoC, or FPGA design experience.
  • Strong RTL design and subsystem integration experience, including clock/reset architecture, configuration interfaces, timing, and CDC/RDC considerations.
  • Strong experience with USB 2.0 or USB 3.x controller, protocol, subsystem integration, or related USB PHY technology.
  • Experience working with Design Verification teams and debugging pre-silicon design or integration issues using simulation, emulation, or FPGA prototyping environments.
  • Experience supporting silicon bring-up, laboratory debug, interoperability, or customer issue resolution.
  • Experience working with DFT or DFD methodologies, including testability, debug observability, scan/ATPG, silicon bring-up, or production-test considerations.
  • Demonstrated experience identifying opportunities, proposing, developing, and implementing AI-assisted engineering workflows to improve design and integration productivity, technical investigation, debug, data analysis, and documentation.
  • Strong technical communication and collaboration skills across engineering disciplines.
Preferred Qualifications
  • Experience with USB protocol operation and debug, including enumeration, link state transitions, power management, error recovery, and compliance or interoperability testing.
  • Experience with USB controller-to-PHY interfaces and specifications, such as UTMI/UTMI+, ULPI, PIPE, or related integration interfaces.
  • Experience with SerDes-based protocols or high-speed serial interfaces, including protocol architecture, controller-to-PHY integration, link bring-up, or system-level debug.
  • Understanding of USB PHY and mixed-signal behavior, including clocking, calibration, termination, equalization, jitter, reset sequencing, power management, initialization, and bring-up.
  • Direct analog circuit design experience is not required.
  • Experience integrating third-party USB controller or PHY IP and working with external IP suppliers on requirements, deliverables, integration, verification, or silicon issues.
  • Familiarity with physical-design interfaces such as synthesis, LEC, static timing analysis, or timing closure.
  • Experience with design-quality methodologies such as Lint, CDC, RDC, low‑power/UPF, or related structural checks.
  • Knowledge of firmware, device configuration, APIs, scripts, drivers, or FPGA software-tool enablement.
  • Exposure to USB compliance, interoperability, package, board, signal‑integrity, connector, or platform-level considerations.
Additional Information

This position requires a successful background and reference checks and satisfactory proof of your right to work in: Malaysia.

Company Overview

Lattice recognizes that employees are its greatest asset and the driving force behind success in a highly competitive, global industry. Lattice continually strives to provide a comprehensive compensation and benefits program to attract, retain, motivate, reward and celebrate the highest caliber employees in the industry. Lattice is an international, service-driven developer of innovative low cost, low power programmable design solutions. Our global workforce, some1,000 strong, shares a total commitment to customer success and an unbending will to win. For more information about how our FPGA, CPLD and programmable power management devices help our customers unlock their innovation, visit www.latticesemi.com. You can also follow us via Twitter, Facebook, or RSS.

At Lattice, we value the diversity of individuals, ideas, perspectives, insights and values, and what they bring to the workplace.

At Lattice, our core values aren’t just something we look for in candidates – they’re something we actively cultivate and live by every day.

GROWTH

We foster a culture where everyone strives for continuous learning and development. We challenge ourselves to boldly deliver exceptional growth and value for customers and shareholders.

RELIABILITY

Our customers trust we

EXECUTION

Innovation turns great ideas into results. Together, we create differentiated products and solutions through disciplined planning, decisiveness, and timely delivery with uncompromising quality.

ACCOUNTABILITY

We own our actions and outcomes: holding ourselves to the highest standards, agilely adapting to change, delivering on our commitments, and empowering each other to drive our success.

TRANSPARENCY

Openness builds trust. We lead with integrity and candor, facing hard facts and embracing tough conversations with clear communication, decisive action, and open honesty at every level.

About Lattice

Lattice is strengthening is leadership in compute, communications, industrial, and embedded markets – underscored by multiple award wins that recognize its innovation, leadership, workplace culture, and collaboration-driven solutions. Lattice Semiconductor (NASDAQ: LSCC) is the low power programmable leader. For over 40 years, Lattice has driven innovation in the semiconductor industry. Our compact, power-efficient field programmable gate arrays (FPGAs) are essential to building a secure, intelligent, and connected world. Lattice is the #1 supplier of small FPGAs worldwide, with the largest installed base in the industry. Our solutions are trusted by over 11,000 customers globally, spanning the compute, communications, industrial, and embedded markets. Founded in 1983 in Oregon’s Silicon Forest, Lattice has grown into a global leader with a passionate team dedicated to pushing the boundaries of programmable logic and fostering a culture of innovation. Headquartered in Portland, Oregon with major operations in San Jose, California, Shanghai, China, and Manilla, Philippines.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Staff Design Engineer
Senior Staff Design Engineer

Lattice Semiconductor • George Town

On-site
MYR 250,000 - 420,000
Senior Staff Design Engineer
Senior Staff Design Engineer

Lattice Semiconductor • Malaysia

On-site
MYR 180,000 - 250,000
Integration Design Engineer
Integration Design Engineer

Lattice Semiconductor • Malaysia

On-site
MYR 180,000 - 260,000
Design Engineer
Design Engineer

Lattice Semiconductor • Penang

On-site
MYR 67,000 - 123,000
Design Engineer
Design Engineer

Lattice Malaysia • Malaysia

On-site
MYR 60,000 - 90,000
Senior Design Verification Engineer (IP)
Senior Design Verification Engineer (IP)

Lattice Malaysia • Malaysia

On-site
MYR 180,000 - 360,000
Design Verification Engineer
Design Verification Engineer

Lattice Semiconductor • Malaysia

On-site
MYR 60,000 - 100,000
Software Development Engineer (Power Calculator)
Software Development Engineer (Power Calculator)

Lattice Malaysia • Malaysia

On-site
MYR 120,000 - 240,000
Competitive compensation
Comprehensive benefits
Mentorship and cross-geo collaboration
+1
Senior Staff IP Design Engineer
Senior Staff IP Design Engineer

Lattice Semiconductor • Penang

On-site
MYR 180,000 - 300,000
Manager, Design Eng (Design Verification)
Manager, Design Eng (Design Verification)

Lattice Semiconductor • Penang

On-site
MYR 180,000 - 300,000