The Senior Grid System Design Engineer is the technical "Gatekeeper" for our BESS pipeline. This role carries dual responsibility: performing the advanced mathematical simulations required for TNB approval and acting as the primary technical auditor for BESS and PPC hardware suppliers.
Key Responsibilities
- BESS Dynamic Modeling: Develop site-specific BESS models including Inverters (PCS), Battery Management Systems (BMS), and Power Plant Controllers (PPC). You must accurately model GridForming (GFM) logic, Virtual Inertia, and sub-50ms Fast Frequency Response (FFR).
- Supplier Technical Auditing: Critically review BESS and PPC supplier proposals. Verify if their stated ramp rates, Round Trip Efficiency (RTE), and control loop latencies are mathematically achievable and compliant with TNB requirements.
- Grid Impact Studies: Lead the execution of Load Flow, Short Circuit, and Transient Stability studies. Must specifically address Weak Grid ($SCR < 2.0$) challenges and ensure the BESS does not cause sub-synchronous oscillations.
- TNB Regulatory Representative: Serve as the lead technical representative at TNB GSO (EMS Unit) meetings. Defend simulation results and manage end-to-end Interconnection Agreement (IA) process.
- Harmonic & Power Quality Validation: Perform detailed harmonic resonance studies to identify if a supplier's inverter switching frequency will clash with the local TNB grid impedance.
Qualifications
- Bachelor’s or Master’s Degree in Electrical Engineering (Power Systems or Power Electronics focus).
- Minimum 8+ years in utility-scale power systems.
- Direct experience modeling at least two utility-scale BESS projects (min 10MWh+) in a professional simulation environment.
- At least 3 successful TNB Grid Impact Study (GIS) approvals.
- Professional Engineer (Ir.) or a high-level Graduate Engineer registered with the Board of Engineers Malaysia (BEM).
- Ability to demonstrate prior experience in rejecting or correcting supplier technical designs based on simulation findings.