Senior Mechanical Engineer – Continuous Improvement for Mechanical Design & Quality Control

Mainspring Energy

Monterrey

Vor Ort

MXN 600.000 - 900.000

Vollzeit

Vor 9 Tagen

Eine vollständige Bewerbung in einer Minute

Maßgeschneiderter Lebenslauf und Anschreiben – versandbereit.

Schaffe es an den ATS-Filtern vorbei

Zusammenfassung

Mainspring Energy seeks a Continuous Improvement Engineer focused on mechanical design to lead product improvements across field and production systems. You will redesign critical components for durability and serviceability, and drive changes back into development to ensure long-term reliability.

You will work on-site at a contract manufacturer, solving complex mechanical problems, measuring performance, and supporting pilot rework and retrofit processes.

Qualifikationen

  • BS + 6 years or MS + 5 years in industry roles with a focus on mechanical design.
  • Hands-on experience with mechanical design, including analysis of bolted joints, stress analysis, and structural integrity.
  • Proven ability to use data-driven root cause analysis to solve complex, cross-functional design issues.
  • Experience addressing and resolving field and production issues.
  • Knowledge of DFM/DFA principles and quality system tools (PFMEA, 8D, CAPA, etc.).
  • Deep understanding of tolerance stack-ups and the use of CMMs in inspection processes.
  • Familiar with manufacturing processes including tube swaging, crimping, potting, stamping, sheet metal, hydroforming, welding, machining, and fabrication.
  • Proficient in SolidWorks or a comparable CAD package; PDM experience preferred.
  • Experience with structural FEA and/or is a plus.
  • A passion for building robust, field-ready solutions with high reliability and serviceability.

Aufgaben

  • Lead the root cause analysis of mechanical failures using data from diagnostics, hands-on testing, and fundamental analysis of bolted joints or material fatigue life.
  • Redesign or re-engineer components, fasteners, or assemblies to eliminate failures, reduce costs, or improve serviceability.
  • Work closely with design engineering, manufacturing, and quality teams to ensure that changes are thoroughly tested and validated with short feedback cycles.
  • Collaborate with NPI, manufacturing quality, and supply chain teams to ensure solutions are optimized for production, vendor capabilities, and field service.
  • Predict and prevent failure modes by applying a deep understanding of mechanical system interactions, tolerance stack-ups, and real-world use conditions.
  • Implement feedback loops from field issues into design standards and engineering processes to continuously improve product quality and reduce recurrence.
  • Create and manage internal improvement systems that embed learnings into manufacturing process flow and future design development efforts.
  • Support the development of service tooling, testing fixtures, or diagnostic aids as needed for improved deployment and serviceability.
  • Travel to HQ in Menlo Park, CA required once per quarter.

Kenntnisse

Mechanical design
Root cause analysis
Tolerance stack-ups
Cross-functional teamwork
Data-driven analysis
Quality systems (PFMEA, 8D, CAPA)
Bolted joints analysis
Durability improvement
Manufacturing support
Structural FEA

Ausbildung

BS + 6 years in mechanical design
MS + 5 years in mechanical design

Tools

SolidWorks
PDM
CMM
FEA software

Jobbeschreibung


Job Overview

Do you have a knack for design of complex mechanical systems? Have you ever invented a tool or changed a process just to make routine installation or service faster and easier? If you're driven by solving real-world design challenges, especially within state of the art mechanical power generation equipment, then this role is built for you.

Mainspring Energy is seeking a Continuous Improvement Engineer with a focus on mechanical design to lead product improvement efforts across our field and production systems. You will work on-site at a contract manufacturer, addressing design and manufacturing issues at their root. You will redesign critical components for durability and ease of service, integrate your findings back into the development process to ensure the long-term reliability and manufacturability of our products. You will support manufacturing with a hands-on approach to solve complex mechanical problems working directly with the product to take measurement, perform testing, and support pilot efforts to develop rework/retrofit processes.

You will redesign critical components for durability and ease of service, and integrate your findings back into the development process to ensure the long-term reliability and manufacturability of our products.

Responsibilities
  • Lead the root cause analysis of mechanical failures using data from diagnostics, hands-on testing, and fundamental analysis of bolted joints or material fatigue life
  • Redesign or re-engineer components, fasteners, or assemblies to eliminate failures, reduce costs, or improve serviceability
  • Work closely with design engineering, manufacturing, and quality teams to ensure that changes are thoroughly tested and validated with short feedback cycles
  • Collaborate with NPI, manufacturing quality, and supply chain teams to ensure solutions are optimized for production, vendor capabilities, and field service
  • Predict and prevent failure modes by applying a deep understanding of mechanical system interactions, tolerance stack-ups, and real-world use conditions
  • Implement feedback loops from field issues into design standards and engineering processes to continuously improve product quality and reduce recurrence
  • Create and manage internal improvement systems that embed learnings into manufacturing process flow and future design development efforts
  • Support the development of service tooling, testing fixtures, or diagnostic aids as needed for improved deployment and serviceability
  • Travel to HQ in Menlo Park, CA required once per quarter
Qualifications
  • BS + 6 years, or MS + 5 years in industry roles with a focus on mechanical design
  • Hands-on experience with mechanical design, including analysis of bolted joints, stress analysis, and structural integrity
  • Proven ability to use data-driven root cause analysis to solve complex, cross-functional design issues
  • Experience addressing and resolving field and production issues
  • Knowledge of DFM/DFA principles and quality system tools (PFMEA, 8D, CAPA, etc.)
  • Deep understanding of tolerance stack-ups and the use of CMMs in inspection processes
  • Familiar with manufacturing processes including tube swaging, crimping, potting, stamping, sheet metal, hydroforming, welding, machining, and fabrication
  • Proficient in SolidWorks or a comparable CAD package; PDM experience preferred
  • Experience with structural FEA and/or is a plus
  • A passion for building robust, field-ready solutions with high reliability and serviceability

Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

Senior Mechanical Engineer – Continuous Improvement Pro
Senior Mechanical Engineer – Continuous Improvement Pro

Mainspring Energy • Monterrey

Vor Ort
MXN 600.000 - 900.000
Product Line Engineer
Product Line Engineer

Ruhrpumpen, Inc. • García

Vor Ort
MXN 320.000 - 460.000
Sr Mechanical Engineer
Sr Mechanical Engineer

Parker • Apodaca

Vor Ort
MXN 500.000 - 720.000
Sr Mechanical Engineer
Sr Mechanical Engineer

Parker • Apodaca

Vor Ort
MXN 650.000 - 950.000
Senior Product Engineer (Mechanical Design)
Senior Product Engineer (Mechanical Design)

Femsa, S. De R.L. De C.V. • Tijuana

Vor Ort
MXN 900.000 - 1.100.000
Sustaining Engineer
Sustaining Engineer

Johnson Controls, Inc. • Apodaca

Vor Ort
MXN 520.000 - 900.000
Product Mechanical Engineering Manager
Product Mechanical Engineering Manager

Wiwynn • Ciudad Juárez

Vor Ort
MXN 900.000 - 1.400.000
Mechanical Design Engineer
Mechanical Design Engineer

Plasticos Castella SA • Región Centro

Vor Ort
MXN 900.000 - 1.400.000
MEX NPD Mechanical Design Eng I
MEX NPD Mechanical Design Eng I

G&W Electric Co. • San Luis Potosí

Vor Ort
MXN 480.000 - 600.000
Manufacturing Engineer III
Manufacturing Engineer III

Intuitive Surgical, S. De R.L De C.V. • Mexicali

Vor Ort
MXN 859.402 - 1.203.162