Process Engineer II

Jabil; Ciudad Juárez; Presencial; MXN 300.000 - 420.000; Jornada completa

Descripción de la vacante

Jabil in Ciudad Juárez, MX seeks a Test Engineering professional to manage testing processes and drive yield improvements across boards and assemblies. You will analyze daily yield data, identify operator and device-related defects, and collaborate with test engineering and maintenance teams to implement preventive actions.

The role emphasizes maintaining documentation, adhering to SPC practices, and ensuring test completeness and reliability while meeting production goals in a fast-paced

Formación

• Ability to read, analyze, and interpret general business documents and technical procedures.
• Ability to write clear reports, business correspondence, and procedure manuals.
• Strong numerical skills and basic statistics for process yields and SPC.

Responsabilidades

• Analyze daily process yield reports including operator errors, defects, test equipment issues, and root-cause actions.
• Increase production yields by reducing operator errors and defects through collaboration with departments.
• Assist maintenance programs to reduce downtime and improve process yields.
• Review downtime and prevention guidelines to schedule maintenance.
• Maintain process manuals and documentation.
• Verify 5x5 tests are performed per procedures.
• Perform walkthroughs, inspections, and product testing as needed.
• Evaluate NPI test processes and prevent test escapes.
• Ensure testing completeness and reliability across assemblies.
• Document and update procedures as required.
• Support Project Test Engineer in process reviews.
• Set up equipment for programming and verification tests per procedures.

Conocimientos

Analytical thinking

Problem solving

Documentation

Reading comprehension

Writing reports

Mathematical ability

Interpret technical instructions

Educación

Associates of Science in Electronics or Electrical Engineering

Technical Certification preferred

Descripción del empleo

Summary

Responsible for the Test Engineering Process and the attributes that can affect the process.

• Analyze daily process yield reports that will include, but not limited to the following: operator errors, defective product, test equipment/test defects, RMA product defects, and spear corrective actions.
• Increase production yields by understanding and reducing operator errors and driving manufacturing and test engineering defects back to the appropriate department.
• Assist Test Engineer in developing preventative maintenance program and assure compliance to reduce downtime and increase process yields throughout the process.
• Analyze downtime sheets recording downtime of a station to set guidelines for preventative maintenance scheduling.
• Ensure all process manuals and documentation are maintained properly.
• Review all 5x5 tests to ensure that they were performed and adhered to.
• Perform walkthroughs, inspections, product evaluation and testing as needed.
• Conduct NPI test evaluations.
• Prevent test escapes.
• Ensure product testing completeness and reliability.
• Update and generate documentation as required.
• Assist Project Test Engineer with test process review.
• Evaluates test probes.
• Set-up equipment to perform any required programming and verification test following established procedures for the specified operations to be performed.
• Ensure quality (work meets or exceeds Jabil Workmanship Standards) and improve efficiency through the use of the SPC system when available.
• Operates automated electronic test equipment on manufactured circuit board assemblies and subassemblies.
• Responsible for maintaining a continuous flow of the manufacturing line and meeting production goals while performing the assigned test duties.
• Label and stamp boards, and fill out tags.
• Advise supervisor of any recurring test failure so that prompt corrective action may be taken.
• Ensure assemblies are properly handled and marked.
• Ensure daily logs and move/production tickets are accurately maintained.
• Follow simple, standardized and routine written directions for assigned test operations.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.
• May perform other duties and responsibilities as assigned.

Summary

Responsible for the Test Engineering Process and the attributes that can affect the process.

• Analyze daily process yield reports that will include, but not limited to the following: operator errors, defective product, test equipment/test defects, RMA product defects, and spear corrective actions.
• Increase production yields by understanding and reducing operator errors and driving manufacturing and test engineering defects back to the appropriate department.
• Assist Test Engineer in developing preventative maintenance program and assure compliance to reduce downtime and increase process yields throughout the process.
• Analyze downtime sheets recording downtime of a station to set guidelines for preventative maintenance scheduling.
• Ensure all process manuals and documentation are maintained properly.
• Review all 5x5 tests to ensure that they were performed and adhered to.
• Perform walkthroughs, inspections, product evaluation and testing as needed.
• Conduct NPI test evaluations.
• Prevent test escapes.
• Ensure product testing completeness and reliability.
• Update and generate documentation as required.
• Assist Project Test Engineer with test process review.
• Evaluates test probes.
• Set-up equipment to perform any required programming and verification test following established procedures for the specified operations to be performed.
• Ensure quality (work meets or exceeds Jabil Workmanship Standards) and improve efficiency through the use of the SPC system when available.
• Operates automated electronic test equipment on manufactured circuit board assemblies and subassemblies.
• Responsible for maintaining a continuous flow of the manufacturing line and meeting production goals while performing the assigned test duties.
• Label and stamp boards, and fill out tags.
• Advise supervisor of any recurring test failure so that prompt corrective action may be taken.
• Ensure assemblies are properly handled and marked.
• Ensure daily logs and move/production tickets are accurately maintained.
• Follow simple, standardized and routine written directions for assigned test operations.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.
• May perform other duties and responsibilities as assigned.

Essential Duties And Responsibilities

• Analyze daily process yield reports that will include, but not limited to the following: operator errors, defective product, test equipment/test defects, RMA product defects, and spear corrective actions.
• Increase production yields by understanding and reducing operator errors and driving manufacturing and test engineering defects back to the appropriate department.
• Assist Test Engineer in developing preventative maintenance program and assure compliance to reduce downtime and increase process yields throughout the process.
• Analyze downtime sheets recording downtime of a station to set guidelines for preventative maintenance scheduling.
• Ensure all process manuals and documentation are maintained properly.
• Review all 5x5 tests to ensure that they were performed and adhered to.
• Perform walkthroughs, inspections, product evaluation and testing as needed.
• Conduct NPI test evaluations.
• Prevent test escapes.
• Ensure product testing completeness and reliability.
• Update and generate documentation as required.
• Assist Project Test Engineer with test process review.
• Evaluates test probes.
• Set-up equipment to perform any required programming and verification test following established procedures for the specified operations to be performed.
• Ensure quality (work meets or exceeds Jabil Workmanship Standards) and improve efficiency through the use of the SPC system when available.
• Operates automated electronic test equipment on manufactured circuit board assemblies and subassemblies.
• Responsible for maintaining a continuous flow of the manufacturing line and meeting production goals while performing the assigned test duties.
• Label and stamp boards, and fill out tags.
• Advise supervisor of any recurring test failure so that prompt corrective action may be taken.
• Ensure assemblies are properly handled and marked.
• Ensure daily logs and move/production tickets are accurately maintained.
• Follow simple, standardized and routine written directions for assigned test operations.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.
• May perform other duties and responsibilities as assigned.

Management & Supervisory Responsibilities

• Typically reports to Management. Direct supervisor job title(s) typically include: Production Supervisor, Production Manager
• Job is NOT directly responsible for managing other employees (e.g., hiring/termination and/or pay decisions, performance management).

Job Qualifications

Knowledge Requirements

• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Education & Experience Requirements

• Associates of Science in NT Electronics or Electrical Engineering or Technical Certification preferred
• Three (3) to five (5) years experience
• Or an equivalent combination of education, training or experience